Theben QuickSet plus User manual
1103013405 © 05.2010 Theben HTS
Art. Nr. 907 0 532
Service remote control
QuickSet plus
Bedienungsanleitung 2
Notice d´utilisation 18
Installation manual 34
Manual de instrucciones 50
Istruzioni per l'uso 66
Gebruikershandleiding 82
Bruksanvisning 98
Bruksanvisning 114
Käyttöohje 130
Betjeningsvejledning 146
DK
D
F
GB
E
I
NL
S
N
FIN
34
English Installation manual
Service remote control
QuickSet plus
Table of contents
1.Usage ..................................................35
2.Functionsandfeatures.....................................36
3.Operation................................................37
4.Behaviorofthedetector ....................................43
5.Update..................................................44
6.Technicaldata............................................ 45
7.Warrantydeclaration....................................... 46
8.Troubleshooting........................................... 47
9. Auxiliary table for settings with QuickSet plus . . . . . . . . . . . . . . . . 47, 162
35
GB
Thank you for purchasing a Theben HTS device and putting your trust in us.
1. Usage
Carefully read the installation manual and familiarize yourself with its func-
tions.
The remote control serves exclusively for the purpose contractually agreed
between the manufacturer and the user. Any other use is regarded as impro-
per. The manufacturer is not responsible for resulting damage.
36
2. Functions and features
●IR remote control for starting up Theben HTS presence detectors
●Quick adaptation to changing service condition without dismantling the
detector
●Transfer of individual settings or complete value packages to the detector
●Saving and calling up value packages
2.1 Control elements
Display
Selector key, left
Selector key, right
Page up/down through the menu,
change settings
Send settings to the detector
Remote control on/off
QuickSet plus
37
GB
3. Operation
While selecting the model, point QuickSet plus at the detector on the ceiling.
3.1 Selection of detector type
The remote control must be set to the right detector type.
model selection
compact ofce
send ¦ change
Go to the “Model selection“ menu. The currently
selected model is e.g. “compact ofce”.
Select a different model.
The current model selection is sent to the detector.
model selection
comp. off. DIM
OK ¦ back
The desired model is set using the arrow keys.
Reject changes, restore the originally selected model.
Select desired model.
The currently selected model ashes and can be
changed using the arrow keys.
38
The detector signals correct model selection by means of the LED which will
icker for 2 seconds. An incorrect choice of model will be indicated by a brief
one-time illumination of the LED.
3.2 Changing and adapting settings
Individual settings may be changed without altering the remaining detector settings.
I I I I I I I I I I I I
brightness 5.0
OK ¦ back
The desired value is set using the arrow keys.
Reject changes, restore the originally selected value.
Select new value; the value can now be sent.
The currently selected value ashes and can be
changed using the arrow keys.
I I I I I I I
brightness 4.0
send ¦ change
For example: Go to the “brightness” menu. A value of
4.0 is currently set.
Value 4.0 is too bright or too dark.
Select a different value.
The current value of 4.0 is sent to the detector.
39
GB
3.3 Send a value package
The current value memory of the remote control holds a complete value
package of settings.
S
e
n
d
i
n
d
i
v
i
d
u
a
l
v
a
l
u
e
S
e
n
d
v
a
l
u
e
p
a
c
k
a
g
e
S
t
o
r
e
v
a
l
u
e
p
a
c
k
a
g
e
L
o
a
d
v
a
l
u
e
p
a
c
k
a
g
e
L
o
a
d
v
a
l
u
e
p
a
c
k
a
g
e
8 free memory units predefined memory units
compact
office
Remote control
QuickSet plus
Current value
memory
send all
current values
send
All current values are sent to the detector.
Current settings: brightness, switch-off delay time,
switch-on delay time (dependent on detector).
40
3.4 Loading a predened value package
For the initial start-up we recommend using the predened value packages
(see pages 162 - 185). „ofce bright“ is for ofces where much light is required.
load values
ofce
OK ¦ change
The saved settings are to be loaded.
Other saved settings are to be loaded.
The pre-programmed factory settings “ofce” are to
be loaded.
load values
ofce bright
OK ¦ back
The desired value package is selected using the
arrow keys.
Reject changes, restore the originally selected
values.
Load new settings, settings for “ofce bright” can now
be sent.
The current setting ashes and can be changed
using the arrow keys.
41
GB
3.5 Storing an user-dened value package
The current value memory can be stored in the remote control as value pa-
ckage. 8 free storage locations are available for each model.
save values
room 1
OK ¦ change
Current settings are to be saved permanently in the
QuickSet plus.
The settings are saved under the name “room 1”.
The current settings are to be saved under a different
name.
save values
room 2
OK ¦ back
The desired storage location is selected using the
arrow keys.
Reject changes, restore the originally selected
storage location.
The settings are saved under the name “room 2”.
The current storage location ashes and can be
changed using the arrow keys.
42
3.6 Options
The „Reset“ command
The detector is restarted. The current settings are retained.
Test mode on/off
The presence detector is set to test mode. To exit test mode, resend “Test
on/off”. The detector performs a reset. Test mode ceases automatically
after 10 minutes. For detailed information, please refer to the installation
manual of the presence detector.
Switching the light
The switched output for light can be switched on or off.
Background lighting
To improve legibility, the display’s background lighting can be switched on.
Note: this will reduce battery life!
Language selection
The available languages are German, French, English, Spanish, Italian, Dutch,
Swedish, Norvegian, Finnish and Danish.
Version
Shows the software version of QuickSet plus. The software version ist also visi-
ble during start-up of the remote control during 2 seconds.
Other manuals for QuickSet plus
1
This manual suits for next models
1
Table of contents
Other Theben Remote Control manuals
