Texgear 57690 User manual
2
ENGLISH
Overview
Specications
Power in: 5 V, 1 A
USB-A out 5 V, 1 A
Battery: 4000 mAh (Li-ion)
Battery time 12 h
Charging time: 5 h
Work temperature: 0 - 40 °C
Weight: 460 g
Max roll angle 180°
Max pitch & pan angle 325°
Phone holder
Pan motor
Battery
indicators
Joystick
Bluetooth light
Mode
indicators
Zoom control
1/4 thread screw
USB power out
Micro USB port
Shutter
Pitch motor
Roll motor
Balance screw
Adjustable arm
Holder adjustment
Power/mode
3
ENGLISH
USB connection
Internal charging
Connect the Micro USB cable from
the handle of the gimbal to an
external power source, such as a
powerbank to prolong the battery
time.
Mobile charging
The USB port on the back of the
handle can be used to charge your
phone while it is being used.
Mounting smartphone
Place the mobile phone in the mounting clip as
shown. Slide the phone to the right until it rests
against the tilt motor.
4
ENGLISH
Adjust balance
If the phone isn't stable after being mounted in the holder please follow the steps below:
Step 1: Loosen the balance screw.
Step 2: Make small adjustments by sliding the horizontal arm to achieve better balance.
Step 3: Tighten the thumb screw after you've made your adjustments.
Note: Proper adjustment of balance ensures better power saving during use. The stabilizer may still function
well when the gravity center is not properly congured; however, it may lead to more power consumption
on the motors, and can greatly affect the torque output.
Use
Power button
Power on:
Press and hold the power button for 3-4 seconds until the mode indicator ashes blue followed by a steady
glow.
Power off:
Press and hold the power button for 3-4 seconds until the mode indicator turns off.
5
ENGLISH
Features
Switch between modes by pressing the power
button.
Step 1: The stabilizer starts in the default pan & tilt
following mode.
Step 2: Press the power button to switch to pan
following mode.
Step 3: Press the power button again to enter the
locked mode.
Note: The Joystick function can be used in all 3
modes.
Following mode:
Roll axis is locked.
Pan and tilt are following
the movement of the
camera
Pan follow mode:
Tilt & roll axes are locked.
The pan axis rotates
smoothly with turn of the
wrist.
Locked mode:
All three axes are locked.
The gimbal is locked and
will not follow the camera.
6
ENGLISH
Change orientation
1. Switching from horizontal to vertical mode
Keep the phone facing yourself and rotate the handle counterclockwise more than 70 degrees, this will
force the gimbal to enter vertical mode (phone camera should be upward).
2. Switch mount direction
Step 1: Loosen the clamp screw and rotate the clamp to vertical position.
Step 2: Place your phone in the clamp.
Step 3. Tighten the clamp and proceed.
Safety information
The gimbal should only be used in temperatures between 0 - 40° C. Any use of the device in temperatures
below or above mentioned range can damage the device. The gimbal is not waterproof or water resistant,
keep it away from liquids of any kinds. Keep the gimbal away from dust and sand.
7
ENGLISH
Bluetooth connection
Start the gimbal. Activate bluetooth on your phone, nd and connect to the gimbal, it should be named
"Stabilizer_xxxxxx". Start the mobile app afterwards.
Gimbal Pro
The gimbal is meant to be used with the app Gimbal Pro that has several smart features. Download the app
from the Google Play store for Android units and App store for iOS units.
1. Photo & video switch
2. Panorama & time-lapse
3. Shutter & shooting
4. Toggle camera
5. Gallery
6. Bluetooth menu
7. Face/object tracking
8. Mode status
9. Gimbal battery
10. Phone battery
11. Flash
12. Home
13. Camera modes
14. Mode select
15. Settings
8
NORSK
Oversikt
Spesikasjoner
Spenning inn: 5 V, 1 A
USB-A utgang: 5 V, 1 A
Batteri: 4000 mAh (Li-ion)
Batteritid: 12 t
Ladetid: 5 t
Arbeidstemperatur: 0 - 40 °C
Vekt: 460 g
Maks. rull-område: 180°
Maks. pitch & pan-område: 325°
Telefonholder
Pan-motor
Batteri-
indikatorer
Joystick
Bluetooth-lys
Status-
indikatorer
Zoom-kontroll
1/4-gjenge
USB ut
Micro-USB-port
Utløser
Pitch-motor
Rull-motor
Balanseskrue
Justerbar arm
Holderjustering
Strøm/modus
9
NORSK
USB-tilkobling
Intern lading
Koble Micro-USB-kabelen fra
stabilisatorens håndtak til en
ekstern strømkilde, for eksempel
en powerbank, for å forlenge
batteritiden.
Mobillading
USB-porten på baksiden av
gimbalens håndtak kan brukes til å
lade mobilen din mens den brukes.
Montering av mobil
Plasser mobilen i festet som vist. Før mobilen til
høyre til den berører tilt-motoren.
10
NORSK
Justere stabilisatoren
Hvis mobilen ikke er balansert etter montering på gimbalen, følger du disse trinnene:
Trinn 1: Løsne balanseskruen
Trinn 2: Gjør små justeringer ved å føre den horisontale armen til en balansert stilling.
Trinn 3: Skru fast skruen etter at mobilen er balansert.
Merk: Skikkelige justeringer sikrer lengre batteritid under bruk. Stabilisatoren kan fungere ved feilaktig
justering, men det kan føre til et høyere batteriforbruk for motorene.
Bruk
Strømbryter AV/PÅ
Slå på gimbalen:
Hold inne strømbryteren (AV/PÅ) i 3–4 sekunder til et blått lys blinker, og avvent til alle lys lyser blått.
Slå av gimbalen:
Hold inne strømbryteren (AV/PÅ) i 3–4 sekunder til lysene slukkes.
Table of contents
Languages:
Popular Camera Accessories manuals by other brands
Viltrox
Viltrox EF-NEX Mount instructions
Calumet
Calumet 7100 Series CK7114 operating instructions
Ropox
Ropox 4Single Series User manual and installation instructions
Cambo
Cambo Wide DS Digital Series Main operating instructions
Samsung
Samsung SHG-120 Specification sheet
Ryobi
Ryobi BPL-1820 Owner's operating manual
