Texas Instruments TMS570 User manual

The platform bar and Code Composer Studio are trademarks of Texas Instruments. All other trademarks are the

Quick Start Guide: TMS570

Microcontroller Development Kit

TMS570 Microcontroller Development Kit Features:

- 337p BGA TMS570LS20216 MCU

- CPU Card and I/O Base Board

- On Board USB XDS100v2 JTAG

- Ambient Light & Temp Sensors

- 3 CAN Transceivers

- 2 FlexRay Transceivers

- 1 LIN Tranceiver

- On Board SCI to USB Serial

- Color Touch Screen LCD

- NHET and GIO LEDs

- 1 RS485 Transceiver

- Multiple Sensor Interfaces

Board Conﬁdence Test & Demo Features:

- Temperature and Ambient Light Sensor Bar Graph Demo

- SD-Card ID and Size Identiﬁcation

- Memory Test for on board RAM, FRAM and EEPROM

- Input Sensor Voltage Display

Temperature and Ambient Light Demo

The full MDK user guide may be viewed at:

http://www.keil.com/support/man/docs/mcbtms570

User Interface

The TMS570 Microcontroller Development Kit (MDK) is ideal for evaluating and starting development with the TMS570 family of

devices. It is comprised of a CPU card and an I/O base board. The kit contains on board XDS100v2 JTAG emulation along with

access to several key communication and peripheral interfaces.

Board Conﬁdence Test & Demo: The TMS570 Microcontroller Development Kit (MDK) Conﬁdence Test &

Demo Application allows veriﬁcation most functions of the CPU and I/O board’s functionality. It also provides a

demonstration of some of the kit’s functionality. This application comes pre-programmed into the TMS570 ﬂash

memory and will automatically run when the +12V DC power supply is connected to the kit. The demonstration

is controlled using the menus on the board’s LCD. The application is included on the MDK DVD and can re-

programmed at a later time.

IMPORTANT: Code Composer Studio 4.x or the TMS570 Safety MCU Demo software must be installed

before the USB mini-B cable for the CPU card’s XDS00v2 JTAG is plugged into the PC!

337p (BGA)

TMS570LS20216 MCU

Light Temperature

USB mini-B: XDS100v2

JTAG SCI to USB

+12V DC Power Input

MIPI

DCAN3

DCAN2

DCAN1

LIN2

20 pin JTAG

RS485

FlexRay

LCD Touch Screen

Micro SD

Sensor Interface

GIO & NHET LEDs

Pressure Sensor

Medical

Push Buttons

Relay Solenoid Drivers

Quick Start Guide:

TMS570 Microcontroller Development Kit Demos

Install the TMS570 MCU Development Kit Software. A full install is required to ensure that all demo

features of the MCU Development Kit are available.

Plug in the +12V power supply into the MDK CPU card and connect the USB mini-B cable

between the MDK CPU card and a USB port on the PC. The PC will recognize the MDK board

as an XDS100v2 JTAG Emulator and a USB Serial port. NOTE: The board conﬁdence test

comes pre-programmed in the TMS570 ﬂash memory and will be overwritten by the Safety

MCU Demo program.

IMPORTANT: Code Composer Studio 4.x or the TMS570 Safety MCU Demo software must be installed

before the USB mini-B cable for the CPU card’s XDS00v2 JTAG is plugged into the PC!

Start the TMS570 Safety Demo Software. In Windows XP the software will be available in

‘Start->All Programs->Texas Instruments->TMS570 Safety MCU Demos.

Launch any of the TMS570 Demos from the launch pad. Internet access is required to view

the device documentation. Code Composer Studio must be installed to view the microcontroller

source code.

EVALUATION BOARD/KIT IMPORTANT NOTICE

Texas Instruments (TI) provides the enclosed product(s) under the following conditions:

This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not

considered by TI to be a ﬁnished end product ﬁt for general consumer use. Persons handling the product(s) must have electronics training and

observe good engineering practice standards. As such, the goods being provided are not intended to be complete in terms of required design-,

marketing-, and/or manufacturing related protective considerations, including product safety and environmental measures typically found in end

products that incorporate such semiconductor components or circuit boards.

The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user indemniﬁes TI from all claims arising

from the handling or use of the goods. Due to the open construction of the product, it is the user’s responsibility to take any and all appropriate

precautions with regard to electrostatic discharge. EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL

BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. TI assumes no liability for applications

assistance, customer product design, software performance, or infringement of patents or services described herein.

USB mini-B

+12V

Other Texas Instruments Microcontroller manuals

Texas Instruments

Texas Instruments Vision SDK Linux User manual

Texas Instruments

Texas Instruments MSPM0G350 Series User manual

Texas Instruments

Texas Instruments MSP430G2955 User manual

Texas Instruments

Texas Instruments CC1110 Programming manual

Texas Instruments

Texas Instruments F280025C User manual

Texas Instruments

Texas Instruments CC110 Series Guide

Texas Instruments

Texas Instruments LM26EVM User manual

Texas Instruments

Texas Instruments CC2531 User manual

Texas Instruments

Texas Instruments TI-InnovatorHub User manual

Texas Instruments

Texas Instruments MSP430F6735A User manual

Texas Instruments

Texas Instruments Hercules TMS570LS31x User manual

Texas Instruments

Texas Instruments CC2520 User manual

Texas Instruments

Texas Instruments TMS570LS User manual

Texas Instruments

Texas Instruments MSP430F6775 User manual

Texas Instruments

Texas Instruments MSP430G2533 User manual

Texas Instruments

Texas Instruments Arrow IoT User manual

Texas Instruments

Texas Instruments Hercules RM48 User manual

Texas Instruments

Texas Instruments MSP430 series User manual

Texas Instruments

Texas Instruments TMS320F2837 D Series User manual

Texas Instruments

Texas Instruments TMS320F2837 D Series User manual

Texas Instruments

Texas Instruments LaunchPad MSP430FR2476 User manual

Texas Instruments

Texas Instruments TMS320C6000 DSP Guide

Texas Instruments

Texas Instruments TMS320F28004x Product manual

Texas Instruments

Texas Instruments SimpleLink CC2650 User manual

Popular Microcontroller manuals by other brands

AMS

AMS AS7261 Demo Kit user guide

Novatek

Novatek NT6861 manual

Espressif Systems

Espressif Systems ESP8266 SDK AT Instruction Set

Nuvoton

Nuvoton ISD61S00 ChipCorder Design guide

STMicrolectronics

STMicrolectronics ST7 Assembler Linker user manual

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM user guide

NEC

NEC 78GK0S/K 1+ Series Application note

Mikroe

Mikroe SEMITECH N-PLC Click Application note

Intel

Intel Agilex user guide

Cypress

Cypress CY4607 HX2VL quick start guide

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE manual

CYPRES

CYPRES CY14NVSRAMKIT-001 user guide

Espressif Systems

Espressif Systems ESP8266EX Programming guide

Abov

Abov AC33M8128L user manual

Laird

Laird BL654PA user guide

Silicon Laboratories

Silicon Laboratories C8051F800 user guide

Energy micro

Energy micro EFM32 Giant Gecko Starter Kit user manual

Mikroe

Mikroe click Proximity 2 manual