Texas Instruments TMS320C6670 User manual

Getting Started

The EVM ships with a Power On Self Test

(POST) flashed into I2C EEPROM. The POST

automatically executes when the board is

powered ON. POST performs memory test

and internal EMAC loopback test. At

power ON, the user LEDs are OFF by

default. The LEDs blink and turn OFF to

indicate successful DSP booting.

After booting, User LED-1 turns ON to

indicate successful RAM test and User

LED-2 turns ON to indicate successful

internal EMAC loop-back test. These LEDs

remain ON to indicate success of both

the tests.

Please refer to the EVM User Guide for

software installation and other details.

Important Notes when handling the

EVM

•Plug in all the cables before powering

ON the EVM to ensure proper grounding.

•Do not unnecessarily flex the boards,

while inserting cables. Excessive flexing

can break the PCB traces.

•Use proper ESD procedures when

handling the EVM.

•Warning: Some components on the EVM

may be too hot to touch with your bare

hand when power is on.

Online Documentation

•TMS320C6670 processor website

http://focus.ti.com/docs/prod/folders/pr

int/tms320c6670.html

•MCSDK website for updates

http://focus.ti.com/docs/toolsw/folders/

print/bioslinuxmcsdk.html

•CCS v5

http://processors.wiki.ti.com/index.php/

Category:Code_Composer _Stu dio_v5

This link contains

•Hardware & Software details

•User Guide

•Technical Reference Manual

•TMS320C6670 Datasheet

TI Worldwide Technical Support

Internet

TI Semiconductor Product Information Center Home Page

support.ti.com

TI Semiconductor KnowledgeBase Home page

support.ti.com/sc/knowledgebase

Product Information Centers

Americas

Phone +1(972) 644-5580 Fax +1(972)927-6377

Internet/Email support.ti.com/sc/pic/americas.htm

Europe, Middle East and Africa

Phone

European Free Call 00800-ASK-TEXAS

(00800 275 83927)

International +49 (0) 8161 80 2121

Russian Support +7 495 981 0701

Note: The European Free Call (Toll Free) number is not active in

all countries. If you have technical difficulty calling the free call

number, please use the international number above.

Fax +(49) (0) 8161 80 2045

Internet support.ti.com/sc/pic/euro.htm

Japan

Fax

International +81-3-3344-5317

Domestic 0120-81-0036

Internet/Email

International support.ti.com/sc/pic/japan.htm

Domestic www.tij.co.jp/pic

Asia

Phone

International +91-80-413816651-

Domestic Toll-Free-Number

Australia 800-999-084

China 800-820-8682

Hong Kong 800-96-5941

India 1-800-425-7888

Indonesia 001-803-8861-1006

Korea 080-551-2804

Fax +886-2-2378-6808

Email [email protected]

[email protected]

Internet support.ti.com/sc/pic/asia.htm

Important Notice: The products and services of Texas

Instruments Incorporated and its subsidiaries described herein

are sold subject to TI's standard terms and conditions of sale.

Customers are advised to obtain the most current and complete

information about TI products and services before placing

orders. TI assumes no liability for applications assistance,

customer's applications or product designs, software

performance, or infringement of patents. The publication of

information regarding any other company's products or services

does not constitute TI's approval, warranty or endorsement

thereof.

The floating bar is a trademark of Texas Instruments.

All other trademarks are the property of their respective owners

Toll-Free-Number

Malaysia 1-800-80-3973

New Zealand 0800-446-934

Philippines 1-800-765-7404

Singapore 800-886-1028

Taiwan 0800-006800

Thailand 001-800-886-0010

The TMDXEVM6670L (Evaluation Module) kit includes

• TMX320C6670 Evaluation Module

• Power adapter and power cord

• USB cable for on-board JTAG emulation (XDS100v1)

• Ethernet cable

• RS-232 serial cable

• Software (DVD) and documentation

Ensure EVM configuration switch

(SW3) are set as shown to run

Power On Self Test (POST)

1Connect the USB mini-B cable

to USB1 plug for on board

embedded emulation and

serial console port, as shown in

figure. (For use with CCS

debugger only)

Connect Ethernet switch /

Router / PC to the Giga Ethernet

port (LAN1) of EVM6678 board

using an Ethernet cable to

access EMAC0

3Connect the 12V DC power

adapter (supplied with the kit)

to power jack (DC_IN1)

4Load the DVD on your

computer and follow the

instructions provided in the

“Read_Me_First.txt” file

TMDXEVM6670L

TMX320C6670 Evaluation Module

DC 12V

DDR3 SDRAM

512 MB

60-pin header for

external emulator

On-Board RS-232

Serial Port

Warm Reset

AMC

Type B+

TMS320C6670

(4 core DSP)

NAND Flash

64 MB

Gigabit

Ethernet

Miscellaneous

I/O 80pin

connector

Full Reset

USB mini-B for XDS100

embedded emulator

Boot Mode /

Configuration

Setting

4 1 2

Other manuals for TMS320C6670

This manual suits for next models

Other Texas Instruments Control Unit manuals

Texas Instruments

Texas Instruments DLP LightCrafter 3010 Gen2 User manual

Texas Instruments

Texas Instruments bq27x10EVM User manual

Texas Instruments

Texas Instruments BoosterPack Educational Plug-in Module Mark II... User manual

Texas Instruments

Texas Instruments TMS320C3 Series User manual

Texas Instruments

Texas Instruments NA210-214EVM User manual

Texas Instruments

Texas Instruments TI-Navigator User manual

Texas Instruments

Texas Instruments CDCM1804 User manual

Texas Instruments

Texas Instruments SimpleLink CC2652PSIP User manual

Texas Instruments

Texas Instruments ADS8555EVM-PDK User manual

Texas Instruments

Texas Instruments bq25505 User manual

Texas Instruments

Texas Instruments TPS54383 User manual

Texas Instruments

Texas Instruments TPS6101xEVM-157 User manual

Texas Instruments

Texas Instruments UCC5390SCD User manual

Texas Instruments

Texas Instruments bq2022A User manual

Texas Instruments

Texas Instruments BQ24296M User manual

Texas Instruments

Texas Instruments CDCE 9 Series User manual

Texas Instruments

Texas Instruments ADS1x15V2EVM-PDK User manual

Texas Instruments

Texas Instruments TPS54226EVM-539 User manual

Texas Instruments

Texas Instruments OPT3004DTSEVM User manual

Texas Instruments

Texas Instruments TRF7960A User manual

Texas Instruments

Texas Instruments XIO2001 User manual

Texas Instruments

Texas Instruments BoosterPack BOOST-IR User manual

Texas Instruments

Texas Instruments TPS53515 User manual

Texas Instruments

Texas Instruments TPS2410EVM User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual