Terrano terrano-x User manual
EN ES
Online
User
Manual
ENGLISH
2|
Thank you for choosing the TERRANO-X. We hope you will enjoy using it. — Your Terrano Team
CONTENTS OF BOX
IMPORTANT: If you purchased the double pack, your retail box will include two sets of each component listed except
for the Quick Start Guide.
TERRANO-X
Channel B Button
• Connects to Channel B / D
Volume Down / Rewind Button
USB cable jack
Mobile Phone Button – Receive / Reject / Pairing
Volume Up / Forward Button
Channel A Button
• Connects to Channel A / C
• MP3 Button
Cradle
Audio Kit
Velcro helmet
mount
Audio Kit Connector
Two speakers
Noise canceling microphone
Spoiler 4 Large Velcro pads
Long strap 4 Small Velcro pads
Short buckle strap 4 Adhesive pads (to hold the
speaker wires on the helmet lining)
USB charging cable Microphone sponge
Silicone Cap Pre-moistened Alcohol Pad
Alcohol
Pad
EN
ENGLISH
|3
CHARGINGTHE BATTERY
Use the USB cable to charge the unit for at least 3 hours before initial use.
Channel“B”/
Channel“D”
Channel “A”/ Channel “C”
While charging, the RED LED turns on. When charging is complete, the
LED will turn o.
GENERAL FUNCTIONS
Power ON/ OFF Press for 2 seconds
• ON: 3 BLUE ashes, Ascending tone • OFF: 3 RED ashes, Descending tone
Volume Tap or to adjust and set volume of current audio source
Mute Tap and simultaneously
Battery Check Press for 2 seconds and check the LED color:
• Blue = Full charge • PURPLE = Half charge • RED = Almost empty
Automatic Volume
Adjustment
(Default: Enabled)
Automatic volume adjustemnt according to ambient noise and riding speed.
In Standby, press for 5 seconds
• Enabled: BLUE ash for 2 seconds • Disabled: RED ash for 2 seconds
Voice Activation
(Default: Regular)
Voice activation can be customized to make it more or less sensitive. Voice activation for
Intercom calls can also be turned OFF.
You can choose between ‘Regular’ and ‘High’ sensitivity. If you experience diculties starting
a conversation, change the setting to ‘High’:
In Standby, press and simultaneously for 2 seconds.
• Regular:BLUE ash for 2 seconds
• High:PURPLE ash for 2 seconds
• O:RED ash for 2 seconds
The TERRANO-X is waterproof
and dustproof. However,
when in use, the silicon cover
should be kept tightly closed
to prevent moisture from
entering the unit.
ENGLISH
4|
STATUS LIGHTS
LED Indication Status
None TERRANO-X is OFF
1 BLUE ash every 3 seconds Standby mode No active audio sources
2 BLUE ashes every 3 seconds Active mode–Call in progress / music or other audio source is ON
1 RED ash every 3 seconds
Low-battery Beep every 3 minutes Standby mode–Battery is low
2 RED ashes every 3 seconds
Low-battery Beep every 3 minutes Active mode – Battery is low
Solid RED Charging
AUDIO SOURCES AND PRIORITIES
If two connected audio sources try to play audio simultaneously, the TERRANO-X automatically determines
which to play through the speakers based on the priority of the connected devices.
Higher Priority 1. Mobile phone audio or GPS instructions*
2. Intercom/Click-to-Link (CTL)
3. A2DP (Stereo Bluetooth) audio
4. Multi-Port–(for corded connection i.e. music players)
*GPS instructions from Smartphone GPS Apps are prioritized like A2DP audio
Lower Priority
• Incoming mobile phone calls will interrupt ongoing intercom calls
• Incoming intercom calls will interrupt the A2DP audio source
• Click-to-Link®calls and Intercom calls have the same priority. A Click-to-Link request cannot interrupt
an Intercom call in progress, and vice-versa.
IC (Intercom) Busy Tone: If you are on a mobile call, Click-to-Link call, or receiving GPS instructions and
Cyclist A or Cyclist B try to connect to you for an IC Call, you will both hear a busy tone (double beep).
ENGLISH
|5
ASSEMBLY ON A HELMET
Helmet Type 1:
O-center vents
Helmet Type 2:
Center vents
(go to page 5) (go to page 6)
Short Buckle Strap
Long Strap
Velcro Side
Smooth Side
Velcro Side
Smooth Side
Front Front
Back
Back
➊ ➋
CradleSpoiler
Optional Spoiler
Deflect branches or other objects
Press here
Connect the Spoiler
Remove the Spoiler
CradleSpoiler
CLICK!
(go to page 6) (go to page 7)
ENGLISH
6|
➋
➊
Back
Front
Front
Back
Velcro Side
Cradle (Top)
FLIPTHE CRADLE
Helmet Type 1
Cradle
(Bottom)
Short Buckle Strap
Smooth Side
Continue on page 7
Continued on page 8
ENGLISH
|7
➊
➋
➌
➍
Front
Back
Front
Back
Front
Back
Helmet Type 2
Back
Front
Cradle
(Top)
Long Strap
Smooth Side
ENGLISH
8|
➊
➋➊
Alcohol
Pad
Back
LargeVelcro Pads
WaitTEN
minutes
Preview:
Final Audio Kit Position
Attaching the Left Speaker
(Optional)
NOTE: Using two speakers inside the helmet may be prohibited
in certain jurisdictions. If you wish to use two speakers, you
should connect the left speaker to the audio kit as shown below. Cradle
Audio Kit
Connector
Inner helmet view
Front
Position the Audio Kit
R L
SmallVelcro Pads
(optional)
Alcohol Pad
(optional)
R
INSTRUCTIONS:
1. Remove any existing
stickers.
2. Optional: Use the Alcohol
Pad to clean the exact spot
on the helmet.
3. Position and attach the
adhesiveVelcro Pads.
Position the Velcro pads
ENGLISH
|9
➋
➌
SpareVelcro Pads
Back
If needed, use the
adhesive pads
to hold the speaker
wires in a
comfortable
location
Inner helmet view
Front
Back
Inner helmet view
Front
Audio Kit
Cradle
Audio Kit
Connector
Audio Kit
R L
R L
R
ENGLISH
10|
➍
➏
➎
1
2
1
Release the
Audio Kit
Connect the Audio Kit
Attach the Headset Release the
Headset
CLICK!
CLICK!
Other manuals for terrano-x
1
Table of contents
Languages:
