Teltonika RUT240 User manual

Saltoniškių g. 9B-1,

LT-08105 Vilnius

Tel. +370 5 212 7472

Faks. +370 5 276 1380

www.teltonika-iot-group.com

[email protected]

RUT240 First Start

From Wiki Knowledge Base | Teltonika

This is the approved revision of this page, as well as being the most recent.

Main Page > Network products > RUT240 > RUT240 First Start

This Wiki page contains the online version of the Quick Start Guide (QSG) for the RUT240 LTE Router. Here you will nd an overview of the

various components found on the front and back sides of a RUT240 device, basic hardware installation, rst login information, device

specications and general safety information. It is highly recommended that you acquaint yourself with with the Quick Start Guide before using

the device. If you own a RUT240 device, you can also nd a printed version of the Quick Start Guide in the device's package.

Contents

1 Front view

2 Back view

3 Connectors

4 Hardware installation

5 Congure your computer (Windows)

6 Login to device

7 Safety information

Front view

No. Description

1 Power LED

Saltoniškių g. 9B-1,

LT-08105 Vilnius

Tel. +370 5 212 7472

Faks. +370 5 276 1380

www.teltonika-iot-group.com

[email protected]

2 Power socket

3 Network type LED

4 SIM holder

5 Mobile signal strength indication LEDs

6 Ethernet ports

7 LAN LED

8 WAN LED

Back view

No. Description

1 WiFi antenna connectors

2 Reset button

3 LTE antenna connectors

Connectors

Power socket pinout

No. Description Wire color

1 Power Red

2 Ground Black

Saltoniškių g. 9B-1,

LT-08105 Vilnius

Tel. +370 5 212 7472

Faks. +370 5 276 1380

www.teltonika-iot-group.com

[email protected]

3 Input Green

4 Output White

Hardware installation

1. Remove the SIM card slot tray with the pin needle. Insert your SIM card and push the tray back into the router. Correct SIM card

orientation can be seen in the gure below:

2. Attach LTE and WiFi antennas

3. Connect the power adapter to the power socket located on the front panel of the device. Then plug the other end of the power adapter

into a power outlet.

Saltoniškių g. 9B-1,

LT-08105 Vilnius

Tel. +370 5 212 7472

Faks. +370 5 276 1380

www.teltonika-iot-group.com

[email protected]

4. Connect to the device wirelessly (SSID: RUT240_****) or use an Ethernet cable.

Congure your computer (Windows)

1. Enable the wireless network connection (go to Start  Control Panel  Network and Internet  Network and Sharing Center. In the left

panel click the Change adapter settings link. Right click on Wireless Network Connection and select Enable).

2. Setup wireless network adapter on your computer (right click on Wireless Network Connection and select Properties. After that select

Internet Protocol Version 4 (TCP/IP) and click Properties).

3. Select Obtain IP address and Obtain DNS server address automatically if they are not selected. Click OK.

Saltoniškių g. 9B-1,

LT-08105 Vilnius

Tel. +370 5 212 7472

Faks. +370 5 276 1380

www.teltonika-iot-group.com

[email protected]

4. Right click on Wireless Network Connection and select Connect to see available wireless networks.

Saltoniškių g. 9B-1,

LT-08105 Vilnius

Tel. +370 5 212 7472

Faks. +370 5 276 1380

www.teltonika-iot-group.com

[email protected]

5. Choose the wireless network RUT240_**** from the list and click Connect. Enter the WiFi password located on the device's label.

1. To enter the router's Web interface (WebUI), type http://192.168.1.1 into the URL eld of your Internet browser.

2. Use the following login information when prompted for authentication:

Saltoniškių g. 9B-1,

LT-08105 Vilnius

Tel. +370 5 212 7472

Faks. +370 5 276 1380

www.teltonika-iot-group.com

[email protected]

3. After you login, you will be prompted to change your password for security reasons. The new password must contain at least 8 characters,

including at least one uppercase letter, one lowercase letter and one digit. This step is mandatory and you will not be able to interact with

the router's WebUI before you change the password.

4. When you change the router's password, the Conguration Wizard will start. The Conguration Wizard is a tool used to setup some of the

router's main operating parameters.

5. Go to the Status  Network page and pay attention to the Signal Strength indication. To maximize cellular performance try adjusting the

antennas or changing the location of your device to achieve the best signal conditions (you can nd information on signal strength

recommendations here).

Saltoniškių g. 9B-1,

LT-08105 Vilnius

Tel. +370 5 212 7472

Faks. +370 5 276 1380

www.teltonika-iot-group.com

[email protected]

Safety information

The RUT240 router must be used in compliance with any and all applicable national and international laws and with any special restrictions

regulating the utilization of the communication module in prescribed applications and environments.

Radio specications

RF technologies GSM, GPRS, EDGE, UMTS/HSPA+, LTE, WiFi

Max RF power 33 dBm@GSM, 24 dBm@WCDMA, 23 dBm@LTE, 20 dBm@WiFi

Bundled accessories specications*

Power AC/DC power adapter 9 V 1 A, 4 pin plug

GSM/WCDMA/LTE antenna 698~960/1710~260 MHz, 50 Ω, VSWR < 3, gain** 3 dBi, omnidirectional, SMA male connector

WiFi antenna 2400~2483.5 MHz, 50 Ω, VSWR < 2, gain** 5dBi, omnidirectional, RP-SMA male connector

Saltoniškių g. 9B-1,

LT-08105 Vilnius

Tel. +370 5 212 7472

Faks. +370 5 276 1380

www.teltonika-iot-group.com

[email protected]

* Order code dependent.

** Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is responsible for the compliance

with the legal regulations.

This sign on the package means that is necessary to read the User's Manual before you start using the device

This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste

Hereby, Teltonika declares that the radio equipment type RUT240 is in compliance with Directives: 2014/53/EU, 2014/35/EU, 2014/30/EU.

The full text of the EU declaration of conformity is available at the following internet address: http://teltonika.lt/product/rut240/

Retrieved from "https://wiki.teltonika.lt/wikibase/index.php?title=RUT240_First_Start&oldid=48174"

Other manuals for RUT240

Table of contents

Other Teltonika Network Router manuals

Teltonika

Teltonika RUT950 LTE User manual

Teltonika

Teltonika RUT230 User manual

Teltonika

Teltonika RUT230 User manual

Teltonika

Teltonika RUT950 LTE User manual

Teltonika

Teltonika RUTX08 User manual

Teltonika

Teltonika QSG RUT950 User manual

Teltonika

Teltonika TFT100 User manual

Teltonika

Teltonika QSG RUT241 User manual

Teltonika

Teltonika RUT500 User manual

Teltonika

Teltonika QSG RUTM50 User manual

Teltonika

Teltonika RUT9 Series User manual

Teltonika

Teltonika RUT955 User manual

Teltonika

Teltonika RUT9 Series User manual

Teltonika

Teltonika RUT240 User manual

Teltonika

Teltonika RUT523 User manual

Teltonika

Teltonika FMB002 User manual

Teltonika

Teltonika FM3622 User manual

Teltonika

Teltonika RUT200 User manual

Teltonika

Teltonika RUT950 User manual

Teltonika

Teltonika RUT955 User manual

Teltonika

Teltonika WiMAX User manual

Teltonika

Teltonika RUT951 User manual

Teltonika

Teltonika FM36M1 User manual

Teltonika

Teltonika QSG RUT951 User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview