Tektronix WFM520UP User manual

WFM520UP and WVR520UP

WFM5200 Waveform Monitor and

WVR5200 Waveform Rasterizer

Upgrade Kit

ZZZ

Instructions

Warning

The servicing instructions are for use by qualiﬁed personnel

only. To avoid personal injury, do not perform any servicing

unless you are qualiﬁed to do so. Refer to all safety summaries

prior to performing service.

www.tektronix.com

*P075102600*

075-1026-00

or suppliers, and are protected by national copyright laws and international treaty provisions.

Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication

supersedes that in all previously published material. Speciﬁcations and price change privileges reserved.

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

Contacting Tektronix

Tektronix, Inc.

14150 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

For product information, sales, service, and technical support:

In North America, call 1-800-833-9200.

Worldwide, visit www.tektronix.com to ﬁnd contacts in your area.

Table of Contents

General Safety Summary .......................................................................................... 1

Kit Description...................................................................................................... 3

Products......................................................................................................... 3

Installation Requirements..................................................................................... 4

Kit Parts Lists .................................................................................................. 4

Upgrade Installation................................................................................................ 5

Verify the Currently Installed Options....................................................................... 5

Install the Software Upgrade ................................................................................. 6

Install the Option Software Key............................................................................. 11

Verify the Upgrade............................................................................................ 12

WFM520UP and WVR520UP Upgrade Kit Instructions i

Table of Contents

ii WFM520UP and WVR520UP Upgrade Kit Instructions

General Safety Summary

Review the following safety precautions to avoid injury and prevent damage to

this product or any products connected to it.

To avoid potential hazards, use this product only as speciﬁed.

Only qualiﬁed personnel should perform service procedures.

While using this product, you may need to access other parts of a larger system.

Read the safety sections of the other component manuals for warnings and

cautions related to operating the system.

To Avoid Fire or Personal

Injury

Use ProperPowerCord. Use only the power cord speciﬁed for this product and

certiﬁed for the country of use.

Ground the Product. This product is grounded through the grounding conductor

of the power cord. To avoid electric shock, the grounding conductor must be

connected to earth ground. Before making connections to the input or output

terminals of the product, ensure that the product is properly grounded.

Observe All Terminal Ratings. To avoid ﬁre or shock hazard, observe all ratings

and markings on the product. Consult the product manual for further ratings

information before making connections to the product.

Do not apply a potential to any terminal, including the common terminal, that

exceeds the maximum rating of that terminal.

Power Disconnect. The power cord disconnects the product from the power

source. Do not block the power cord; it must remain accessible to the user at

all times.

Do Not Operate Without Covers. Do not operate this product with covers or

panels removed.

Do Not Operate With Suspected Failures. If you suspect that there is damage to

this product, have it inspected by qualiﬁed service personnel.

Avoid Exposed Circuitry. Do not touch exposed connections and components

when power is present.

Use Proper AC Adapter. Use only the AC adapter speciﬁed for this product.

WFM520UP and WVR520UP Upgrade Kit Instructions 1

General Safety Summary

Do Not Operate in Wet/Damp Conditions.

Do Not Operate in an Explosive Atmosphere.

Keep Product Surfaces Clean and Dry.

Provide Proper Ventilation. Refer to the manual's installation instructions for

details on installing the product so it has proper ventilation.

TermsinthisManual These terms may appear in this manual:

WARNING. Warning statements identify conditions or practices that could result

in injury or loss of life.

CAUTION.Caution statements identify conditions or practices that could result in

damage to this product or other property.

Symbols and Terms on the

Product

These terms may appear on the product:

DANGER indicates an injury hazard immediately accessible as you read

the marking.

WARNING indicates an injury hazard not immediately accessible as you

read the marking.

CAUTION indicates a hazard to property including the product.

The following symbol(s) may appear on the product:

2 WFM520UP and WVR520UP Upgrade Kit Instructions

Kit Description

This document provides instructions for installing the following upgrades into

an existing Tektronix WFM5200 Waveform Monitor and WVR5200 Waveform

Rasterizer.

Table 1: Supported upgrades

Upgrade Description

Option 3G Adds support for 3G-SDI signal formats.

Option GEN Adds support for signal generation capability.

Option AUD Adds 16 channel Embedded AES/EBU Audio Monitoring.

Option DATA Adds Advanced Data Monitoring and Analysis Package.

Option CAM Adds Camera Monitoring package.

Option LOUD Adds Audio Loudness monitoring capabilities (requires that Option AUD is installed).

Option PROD Adds Advanced Gamut Monitoring Package (Spearhead Display and Luma Qualiﬁed Vector Display).

Products

All models of the following Tektronix instruments are supported by this kit:

WFM5200 Waveform Monitors

WVR5200 Waveform Rasterizers

WFM520UP and WVR520UP Upgrade Kit Instructions 3

Kit Description

Installation Requirements

The following are required to install the upgrade.

Table 2: Installation requirements

Item Description

Ethernet network connection Standard Ethernet network access

Standard PC Running Windows 98, Windows NT 4.0,

Windows ME, Windows 2000, Windows XP,

or Windows 7

SW Option Key An option key was included in this kit. This

key allows you to enable the option in your

instrument through the remote Web interface.

USB memory device (optional) This can be used if you want to download

the SW onto a memory device ﬁrst, and then

download the SW to the instrument

WFM5200 or WVR5200 Speciﬁcations

and Performance Veriﬁcation Technical

Reference and all test equipment listed within

to perform the veriﬁcation checks (optional)

Tektronix part numbers 077-0533-XX and

077-0534-XX

Available for download from the Tektronix

Web site at www.tektronix.com/manuals

Kit Parts Lists

The following table lists the parts supplied with each upgrade kit. Before you

start the upgrade, verify that you received all of the parts for the upgrade kit you

ordered.

Table3: Kitpartslist

Quantity Part number Description

1EA —— ENVELOPE, IMPORTANT DOCUMENTS; CONTAINS

SOFTWARE OPTION KEY

1 EA 075-1026-XX INSTRUCTIONS; WFM520UP and WVR520UP

UPGRADES (this document)

A—— OPTION KEY LABEL

A——OPTION KEY CERTIFICATE (8.5 X 11, PRINTED)

4 WFM520UP and WVR520UP Upgrade Kit Instructions

Upgrade Installation

This section provides instructions for the following:

Verifying the currently installed options

Installing the software upgrade

Installing the software option key

Verify the Currently Installed Options

The software option key supplied in this kit is based on the serial number you

supplied when you ordered the upgrade for the instrument. The new software

option key should enable the new option(s) you ordered, and also preserve your

previously purchased options.

Before you install the upgrade, perform the following steps to verify which

options are currently installed in your instrument. After you install the upgrade,

you will verify that the new options are installed and that any previously installed

options are still enabled.

1. Power on the instrument you are upgrading.

2. Press the CONFIG button on the front panel.

3. Navigate to Utilities >View Instrument Options.

4. Make a list of the installed options.

List installed options

WFM520UP and WVR520UP Upgrade Kit Instructions 5

Upgrade Installation

Install the Software Upgrade

CAUTION. To prevent upgrade failure, your instrument must have the latest

version of software installed before you install the hardware upgrade and before

you install the software option key.

Before You Begin You do not need to perform the software upgrade if your instrument has the latest

version of software installed. Perform the following steps to determine if the

software on your instrument needs to be upgraded:

1. Power on the instrument.

2. Verify the current software version installed on the instrument:

a. Press the CONFIG button on the front panel.

b. NavigatetoUtilities >View HW/SW Version.

c. In the Hardware and Software Versions display window, note the software

version number of the instrument.

Instrument Software version number

3. Verify the latest version of software at the Tektronix Web site:

a. Use the Web browser on a PC to navigate to the following Tektronix

Web site:

http://www.tektronix.com/downloads

b. On the Downloads Finder Web page, search by model number (such

as WFM5200) and ﬁlter by software and software type to locate the

software-upgrade package for the instrument.

c. Note the latest version number of the software-upgrade package(s).

Web site Software version number

4. If the latest software version at the Web site is newer than the version on your

instrument, you need to upgrade the software.

5. Download the latest version to your PC.

6. After the software package is downloaded, click on the self-extracting archive

to extract the following ﬁles into the directory of your choice: transfer.exe

and ﬁrmware.pkg. There may also be a readme.txt ﬁle.

6 WFM520UP and WVR520UP Upgrade Kit Instructions

This manual suits for next models

Table of contents

Other Tektronix Monitor manuals

Tektronix

Tektronix MTM400 User manual

Tektronix

Tektronix WFM7200 How to use

Tektronix

Tektronix WFM601 User manual

Tektronix

Tektronix WFM6120 Installation and maintenance instructions

Tektronix

Tektronix MTM400A Installation and maintenance instructions

Tektronix

Tektronix 1480R Series User manual

Tektronix

Tektronix AMM768 User manual

Tektronix

Tektronix MTM400A User manual

Tektronix

Tektronix 1740A/1750A User manual

Tektronix

Tektronix 4112 User manual

Tektronix

Tektronix QAM400A Use and care manual

Tektronix

Tektronix 4023 User manual

Tektronix

Tektronix WFM700 Series User manual

Tektronix

Tektronix WFM4000 Series User manual

Tektronix

Tektronix WFM6100 Opt. MB User manual

Tektronix

Tektronix WFM720UP User manual

Tektronix

Tektronix WFM2200 Installation and operating manual

Tektronix

Tektronix 4105 User manual

Tektronix

Tektronix WFM90D User manual

Tektronix

Tektronix MTM400 Use and care manual

Tektronix

Tektronix WFM7200 User manual

Tektronix

Tektronix WFM5200 series User manual

Tektronix

Tektronix WFM4000 Series User manual

Tektronix

Tektronix Sentry User manual

Popular Monitor manuals by other brands

Linear Acoustic

Linear Acoustic LQ-1000 user guide

AOC

AOC I2579V user manual

Gateway

Gateway FPD1520 user guide

Furuno

Furuno Mu 120c Operator's manual

Asus

Asus VB171D - 17" LCD Monitor Service manual

Dell

Dell S2230MX Setting up

Philips

Philips 107C64 user manual

Dell

Dell S2409WFP user guide

EverFocus

EverFocus EN-7517E instruction manual

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

Dell

Dell Precision 7680 Connection guide

LG 50PM1M - - 50" Plasma Panel Service manual

Bosch

Bosch DDU 9 manual

Acer

Acer A231HL user manual

Philips

Philips 86BDL4152T user manual

NEC

NEC AccuSync LCD5V user manual

Emay

Emay SleepO2 user manual

IBM

IBM 6360 Product support manual