Teko User guide User manual

Popular Security Sensor manuals by other brands

THORLABS

THORLABS PDA10JT user guide

Waeco

Waeco UV-DETECT operating manual

Intermatic

Intermatic IOS-DSIMF manual

urmet domus

urmet domus 1083 manual

Siemens

Siemens AZL66 Series manual

BTI

BTI Profiline Multi Finder operating instructions

Challenger

Challenger SL01 instruction manual

DMP Electronics

DMP Electronics 1122INT installation guide

Rielta

Rielta Ladoga MK-RK installation guide

Mirion Technologies

Mirion Technologies ACCURAD PRD user manual

Bosch

Bosch DS835 installation instructions

DBI SALA

DBI SALA EZ Stop User instruction manual

Lamptime

Lamptime ST05C instructions

Ubiquiti

Ubiquiti MFI-MSC quick start guide

Subsite

Subsite 910R Support

Satel

Satel OPAL Pro manual

Aleph

Aleph XC-1XTEU manual

Pima

Pima LARIS QUAD installation instructions

Astra-321

Electro-Contact Panic Button

User Guide

Manufacturer:

ZAO NTC TEKO

420038 Kazan, Russia

Gafuri 71

+7(843) 528-03-69

[email protected]

www.teko.biz

Made in Russia

rev. 321-v2_1_instr_en

1 FUNCTION

The detector is untended for manually switching

on the alarm signal by pressing the button and

transferring the alarm signal via 2-wire line.

2 SPECIFICATION

Switching voltage, V, max..............................30

Switching current, mA, max............................50

Overall dimensions, mm.....................85×57×30

Operating conditions

Temperature range, °С........from - 30 up to +50

Relative air humidity, % ............up to 95 at +25 °С

without moisture condensation

3 DELIVERY SET

Delivery set includes: unlock key –2 pcs., label

–2 pcs.

4 OPERATION

The detector generates an alarm signal once

the detector button is pressed.

The button is mechanically locked in the

“Alarm” status by a spring.

A key is used to reset the detector to the

standby status.

5 INSTALLATION PLACE

The detector shall be mounted in a concealed,

discreet location for prompt and inconspicuous

use.

6 INSTALLATION PROCEDURE

1) Press the button

until it is fixed.

Remove the cover.

2) Mount the but-

ton in the selected

location.

3) Connect wires

(see p. 7)

4) Close the cover:

- install the key

vertically into the

button cover lock;

- install the cover until

it clicks.

5) Unlock the button

by turning the key

counterclockwise

6) Install the button in

standby state by

turning the key

clockwise.

Take out the key!

7) Check functionality

(see p. 8).

7 WIRING

Perform wiring to detector`s terminals in

accordance with control panel operating manual.

NC and COM - normally closed relay contacts;

NO and COM - normally open relay contacts.

8 OPERABILITY TEST

1) Press the button.

The button must stay

closed in the

pressed position.

2) Check the alarm

notification on the

control panel.

3) Unlock the but-

ton by turning the

key counterclock-

wise

4) Return the but-

ton to standby status

by turning the key

clockwise.

Take out the key.

9 WARRANTY

The operation warranty period is 2 years from the date

of operation start-up but no longer than 2 years 6

months from the date of manufacturing subject to the

requirements of the User guide.