TECO TFF203WNTDM User manual

TFF203WNTDM

TFF203SNTDM

REFRIGERATOR / FREEZER

User Manual

CONTENTS

Important Safety Instructions

Installation Instructions

Reversing the Door

Starting Instructions

Structure and Functions

Maintenance and Care of the Appliance

Troubleshooting

Repair, Service & Warranty

Specifications

Important Safety Instructions

Warning:risk of fire / flammable materials.

•

Thank you for purchasing our product and thank you for placing your

confidence in us.

•

Read this manual carefully before use. Follow instructions and keep the

manual for future reference.

•

Follow the operating instructions and safety notices in this manual.

•

If any trouble arise, do not attempt to fix it yourself. Please contact TECO

service on 1300 660 037 (8:30am - 4pm Mon~Fri AEST).

•

This refrigerator is designed and approved for use with flammable R600a

refrigerant.

•

The appliance is specifically constructed for domestic use only. The appliance

has not been designed or manufactured for professional use. TECO declines

all responsibility for damage deriving from improper use of the appliance. The

refrigerator

has undergone the necessary tests on the tightness of the refrigeration circuit

and complies with the safety regulations

for electrical appliances.

•

All images, illustrations and photos contained in this manual are for illustration

purposes only and may differ from your appliance.

Prohibition symbol

Warning symbol

Note symbol

This is a prohibition symbol.

Any incompliance with instructions marked with this

symbol may result in damage to the product or endanger

the personal safety of the user.

This is a warning symbol.

It is required to opera te in stric t observance of

instructions marked with this symbol; or otherwise

damage to the product or personal injury may be caused.

This is a cautioning symbol.

Instructions marked with this symbol require special

caution. Insufficient caution may result in slight or

moderate injury, or damage to the product.

•This appliance contains a small quantity of flammable, non-synthetic

R600a refrigerant.

•The room for installing the appliance must be at least

1m3 per 8g of refrigerant. The amount of refrigerant in

the appliance can be found on the rating plate attached

to the appliance.

•If the refrigerant circuit should become damaged. Avoid

open flames and sources of ignition. Disconnect

the appliance from the mains power. Thoroughly

ventilate the room in which the appliance is situated

for several minutes.

•The refrigerator is designed to operate on a single phase power

supply within a voltage range of 220~240V/50Hz.

•The refrigeration system contains refrigerant. Do not allow any

sharp objects to come in contact with the refrigerant system to

avoid damage the refrigerant circuit.

•This product is for indoor use only.

•Do not place electrical items or cooking equipment nearby. Keep away

from substances which could cause ignition and good

ventilation shall be always maintained.

•Do not place objects on top of the appliance which are magnetic,

heavy or filled with water.

•If the supply cord is damaged, it must be replaced by authorised TECO

service personal, service agent or similarly qualified persons in order to

avoid a hazard.

•Do not store flammable, explosive, volatile and highly corrosive

materials in the refrigerator. Containers with flammable gases or

liquids can leak at low temperature. There is a risk of explosion or fire.

•Do not splash water on the appliance. It may cause malfunction or electric

shock.

•Always switch off and unplug appliance before cleaning.

•Keep ventilation openings, in the appliance enclosure or in the built-in

structure, clear of obstruction.

•Do not use mechanical devices or other means to accelerate the

defrosting process, other than those recommended by the manufacturer.

•Do not use electrical appliances inside the food storage compartments

of the appliance.

•For appliances which use flammable insulation blowing gases, Please

keep the products away from the fire or similar glowing substance.

•This appliance is intended to be used in household and similar

applications such as:

ostaff kitchen areas in shops, offices and other working

environments;

ofarm houses and by clients in hotels, motels and other

residential type environments;

obed and breakfast type environments;

ocatering and similar non-retail applications.

•This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person

responsible for their safety.

•Young children should be supervised to ensure that they

do not play with the appliance.

•Packing (e.g. wraps, polystyrene etc.) can be dangerous

for children. There is a risk of suffocation. Keep

packaging materials away from children.

Refrigerant and cyclopentane foaming material used for the

refrigerator are flammable. Therefore, when the refrigerator is

scrapped, it shall be kept away from any fire source and be

recovered by a special recovering company with

corresponding qualification other than be disposed by

combustion, so as to prevent damage to the environment or

any other harm.

When the refrigerator is scrapped, disassemble the

doors, and remove gasket of door and shelves; put

the doors and shelves in a proper place, so as to

prevent trapping of any child.

Correct Disposal of this product：

This marking indicates that this product should not

be disposed with other household wastes. To prevent

possible harm to the environment or human health from

uncontrolled waste disposal, recycle it responsibly to

promote the sustainable reuse of material resources. To

return your used device, please use the return and

collection systems or contact the retailer where the

product was purchased. They can take this product for

environmental safe recycling.

•Contact your local authorities for correct method of disposal.

Dispose of all packaging in a responsible manner in accordance

with local regulations.

Precautions before installation:

Before installation or adjusting of accessories, it shall be

ensured that the refrigerator is disconnected from power.

Precautions shall be taken to prevent fall of the handle from causing

any personal injury.

30cm

10cm

Installation Instructions

• Before using the refrigerator for the first time, remove all of the packing

materials, including the foam base and adhesive tape holding accessories in

place; tear off the protective film on th e doors and the refrigerator body.

• The refrigerator should be located in a well-ventilated indoor place; the ground

shall be firm, flat surface that is strong enough to support the refrigerator when

it is fully loaded.

• Choose a location that is not exposed to direct sunlight, high temperatures,

heat sources such as a stove or radiator, or in a moist area. Do not choose a

location where the temperature will go below 12°C as this could cause the

refrigerator to not function properly.

•The top space of the refrigerator shall be greater

than 30cm, and the refrigerator should be placed

against a wall with a free distance more than 10cm

to facilitate heat dissipation. This allows for proper

air circulation. This appliance is intended to be free-

standing and should not be built-in or placed in a

recessed area.

•The refrigerator legs must be adjusted during

installation in order to function properly. The leveling

legs on the front corners can be adjusted by turning

clockwise to raise the appliance, and counter-

clockwise to lower it. Be sure to have the appliance

slope slightly backward to ensure that the door

closes tightly.

Adjusting procedures:

a. Turn the feet clockwise to raise the refrigerator;

b. Turn the feet counterclockwise to lower the refrigerator;

c. Adjust the right and left feet based on the procedures above to a

horizontal level.

3) Unscrew the middle hinge screws, remove the middle hinge, and remove

the two hole plug, a screw, a screw cap on the middle beam, then remove the

refrigerator door.

upper hinge cover

upper hinge

screw

hole cover

middle hinge

screw

hole plug

screw cap

screw

Reversing the Door

1) Please power off this appliance before conduct this operation. Remove all

food from door shelves.

2) Remove hole cap, the upper hinge cover,fitting screws of upper hinge,

upper hinge and sleeve pipe, then uplift the freezer door until it is separated

from cabinet completely.

4) Remove the adjusting feet, lower hinge screw and lower hinge assembly,

then install the lower hinge assembly on the other side of the box and install

the adjusting feet on the side of the adjusting feet opening.

6) Install the refrigerator compartment door on the lower hinge and then install

the middle hinge and hole caps.

5) Dismantle the limit blocks and screws on the lower cover of both refrigerator

door and freezer door, install them on the other side of both doors; then install

the sleeve pipe on the upper cover of the refrigerator door on the other side.

Lower hinge

assembly

screw

Adjusting feet

sleeve pipe

stopper

screw

limit blocks

Energy saving tips

•The appliance should be located in the coolest area of the room,

away from heat producing appliances or heating ducts, and out of the

direct sunlight.

•Let hot foods cool to room temperature before placing in the appliance.

Overloading the appliance forces the compressor to run longer. Foods

that freeze too slowly may lose quality, or spoil.

•Be sure to wrap foods properly, and wipe containers dry before placing

them in the appliance. This cuts down on frost build-up inside the

appliance.

•Appliance storage bin should not be lined with aluminum foil, wax paper,

or paper toweling. Liners interfere with cold air circulation, making the

appliance less efficient.

•Organize and label food to reduce door openings and extended

searches. Remove as many items as needed at one time, and close the

door as soon as possible.

(The picture above is only for reference. The actual configuration will depend

on the physical product or statement by the distributor).

•Before initial start, keep the refrigerator still for two

hours before connecting it to power supply.

•Before putting any fresh or frozen foods, the

refrigerator shall have run for 2-3 hours, or for

above 4 hours in summer when the ambient

temperature is high.

•Spare enough space for convenient opening of the

doors and drawers or statement by the distributor.

7) Install the freezer door on the middle hinge, and install the upper hinge,

hinge cover and hole cover.

hole cover

upper hinge

hinge cover

screw

135°

978mm

545mm

929mm

Starting Instructions

Shelf

Temperature

control panel

Refrigerator

glass shelf

Fruits and

vegetables box

Door tray

LED light

Damper adjusting slider

Drawer flip

This manual suits for next models

Table of contents

Popular Refrigerator manuals by other brands

Bonnet Neve

Bonnet Neve SKYVIEW PLUS User instructions

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Instruction book

Sharp

Sharp SJ-BA31IEXW2-EU user manual

CORBERO

CORBERO CC2300MCW Instruction booklet

KitchenAid

KitchenAid 2205264 Use and care guide

Stengel

Stengel KU 1101 A++ user manual

NEFF

NEFF KI181 Series user manual

Hoshizaki

Hoshizaki Reach-In instruction manual

Amana

Amana ASD2524VES00 User instructions

BOMANN

BOMANN KGC 213 instruction manual

Danby

Danby DAR044A1SLDD Owner's use and care guide

Samsung

Samsung RF323TE user manual

Beko

Beko CSA31022 Instructions for use

IKEA

IKEA FROSTIG C 185 E manual

Electrolux

Electrolux ER 6821 D Instruction book

True

True TS-28 Specifications

Frigidaire

Frigidaire FSC23R5DW9 installation guide

Beko

Beko LSP4579W Instructions for use