TCL LIFESENSE DS01 User manual
Quick Start Guide
CJB1H9002AAA
2
What's In The Box?
Quick start guide
LIFESENSE x 1 Quick Start Guide x 1 Double-sided tape x 1
3
Specicaon
Product name LIFESENSE
Model name DS01
Operang frequency 2.4 GHz
Transmied power 8±2dbm
Baery model CR2032
Baery life >2 years
Installaon distance <20mm
4
Geng to Know Your LIFESENSE
The LIFESENSE sensor is an open/closed sensor for indoor use. With
this device, you can monitor the open/closed status of any door or
window in your home, garage or cabinet, for example.
Note: This device requires a LIFECONNECT in order to work.
Magnet
LED indicator
Reset hole
LED indicators
Flashing blue Searching for LIFECONNECT
Constant blue Connected to network
Flashing red Low baery
5
Adding Your LIFESENSE
1. Make sure that the LIFECONNECT is connected with your router.
2. Open your LIFE App, log in to your account and select “+” in the
App. Follow the on-screen instrucons in the App to add and
congure your LIFESENSE.
3. Open the LIFESENSE and remove the baery isolaon tag found
in the device.
Note: If the connecon fails aer removing the tag, use a needle to press the
LIFESENSE reset hole unl the blue LED turns on. The LIFESENSE LED will
ash blue while aempng to connect. Then select “+” in the LIFE App.
6
Installing Your LIFESENSE
Sensor
Magnet
1. Remove the protecve lm of the double-sided tape.
2. Mount the sensor on your door/window frame and the magnet on
the door/window itself. (Ensure that the gap between the magnet
and the sensor is less than 20mm.)
Notes:
• Apply the double sided tape to a clean and dry surface.
• Your LIFESENSE should be as close as possible to your LIFECONNECT
while the connecon is being made. Within 5 metres is opmal.
7
Disconnecng from current network
If you want to remove the LIFESENSE from your current network,
use one of the following two methods:
• Long press the reset hole unl the LED light ashes blue.
• Remove from the App as follows:
1. Launch the LIFE App.
2. Select LIFESENSE and open the homepage.
3. Select “Remove LIFESENSE” from the popup menu.
8
Replacing Baery
To replace the baery, open your LIFESENSE and insert a new
CR2032 baery.
①②③
9
FAQ
1. Q: How long will my LIFESENSE work for?
A: Your LIFESENSE uses a coin cell baery, with a lifespan of
up to 2 years. (based on 10 open/closed occurrences per day;
baery life will vary according to the level of usage).
2. Q: Can my LIFESENSE be used outside?
A: The LIFESENSE is for indoor use only.
3. Q: Can I control the opening and closing of automatic win-
dows and doors using my LIFESENSE?
A: Your LIFESENSE does not support control over the opening
and closing of automac windows and doors.
4. Q: Why can't my LIFESENSE be stuck rmly to the window or
door?
A: Wipe clean the place you want to sck the device with a
wet towel, allow to dry and then reapply the double-sided tape.
10
Safety and Use
Electronic Devices
Turn o your device near high-precision electronic devices. The
wireless device may aect the performance of these devices.
Such devices include hearing aids, pacemakers, re alarm systems,
automac gates, and other automac devices. If you are using an
electronic medical device, consult the device manufacturer to
conrm whether radio waves aect its operaon.
Hospitals
Pay aenon to the following points in hospitals or health care
facilies:
• Do not take your wireless device into the operang room, inten-
sive care unit, or coronary care unit.
• Do not use your wireless device at places for medical treatment
where wireless device use is prohibited.
Storage Environment
• Do not place magnec storage media such as magnec cards and
oppy disks near the wireless device. Radiaon from the wireless
device may erase the informaon stored on them.
• Do not put your wireless device and other accessories in contain-
Table of contents
Other TCL Accessories manuals
