Taylor 5721F Operating manual
QUICK USE GUIDE
MODEL # 5721F | Body Composition Scale
Preparation Before Use
1 INSERT THE BATTERIES
• 2 'CR2032' batteries are included with your scale.
2 YOUR SCALE IS SET AT THE FACTORY TO WEIGH IN POUNDS (LB)
• To switch to other units of please refer to the instruction manual.
3 SET THE SCALE IN THE RIGHT POSITION
• Use only on a flat and hard floor surface. Do not use on carpets.
4 START-UP THE SCALE
• Press firmly one time on the scale platform to start-up the scale. The display shows “0.0”
and then turns off. The scale is ready for use.
Setting Up The User Profile Information
Repeat steps 1-7 to set other pre-programmed Memory Locations
3. Select Height
Press the “s” or “t” key to adjust the height.
Press the “set” button to confirm.
4. Set Age
Press the “s” or “t” key to adjust the age. Press
the “set” button to confirm.
1.
Press the “
” button to turn the scale on.
2. Set Memory
Press the “
s
” or “
t
” key to select a memory
location (1-8 users). Press the “
set
” button to
confirm.
5. Select Gender
Press the “s” or “t” key to toggle between the
male ( ) & female ( ) icons. Press the “set”
button to confirm.
6. Select Normal or Athlete Mode
Press the “s” or “t” key to toggle between
normal (N) or athlete (A) mode. Press " set " to
confirm all settings.
7. Measuring
Then the scale shows "0.0". Step on the scale with bare feet and stand still while the weight is being
measured.
Using the Scale
RF QU5721FC
5.21 WC
You must have bare feet for estimation results. Remove your shoes and socks before
proceeding. Clean, slightly moist feet will provide the best results.
1. Press the " " key to turn on
the scale and use the “
s
”
or “
t
”
keys to select user
memory.
4. Stand still while the scale measures your weight.
5. Your weight, body fat percentage, total body water percentage and BMI will display
twice sequentially. The scale turns off automatically.
2. Once the correct user memory is selected, the screen will display the height, age,
gender and athlete/normal mode.
3. When “0.0” appears on the screen, step onto the scale with bare feet positioning
them evenly on the scale platform with maximum contact with the metal
electrodes.
Couple of Reminders...
• After you programmed your
personal data into memory the
scale will recognize by your
weight.
• Only reprogram if age, height,
or weight has changed (+/-6.6
lbs/3kgs).
Table of contents
Other Taylor Scale manuals
Taylor
Taylor TR250 User manual
Taylor
Taylor 702940133 User manual
Taylor
Taylor Lithium 7409 User manual
Taylor
Taylor 7335 User manual
Taylor
Taylor 3842 User manual
Taylor
Taylor 7356 User manual
Taylor
Taylor 2004 User manual
Taylor
Taylor 2000 User manual
Taylor
Taylor THE BIGGEST LOSER 7334 User manual
Taylor
Taylor 7527 User manual
Taylor
Taylor 7524 Instruction Manual
Taylor
Taylor TS10-41 User manual
Taylor
Taylor 7549 User manual
Taylor
Taylor 5273274 Instruction Manual
Taylor
Taylor 7568 User manual
Taylor
Taylor CP7556 User manual
Taylor
Taylor 7222F Instruction Manual
Taylor
Taylor 3724-21 User manual
Taylor
Taylor 3800N User manual
Taylor
Taylor 7506 User manual
