System air DVP Series User manual

Document in original language | · 002

Roof fan plastic

DVP

Installation and Operating Instructions GB

| 002

E&OE

Systemair AB reserves the rights to alter their products without notice.

This also applies to products already ordered, as long as it does not affect the previously agreed specifications.

| 002

Contents

1 General information.........................................1

1.1 Notice symbols......................................1

1.1.1 Instruction symbols.....................1

2 Important safety information .............................1

2.1 Personnel .............................................1

2.2 Personal protective equipment..................2

2.3 5 rules of electrical safety ........................2

3 Warranty.......................................................2

4 Delivery, transport, storage ...............................2

5 Description ....................................................4

5.1 Dimension ............................................4

5.2 Technical data .......................................5

5.3 Chemical components .............................5

5.4 Intended use .........................................5

5.5 Incorrect use ........................................5

6 Name plate and type key ..................................6

7 Accessories....................................................7

8 Installation.....................................................7

8.1 Installation positions ...............................8

9 Electrical connection ........................................8

9.1 Protecting the motor...............................9

9.2 Variable-speed fans................................9

10 Commissioning ...............................................9

11 Operation .................................................... 10

12 Troubleshooting/maintenance/repair ................ 10

12.1 Troubleshooting................................... 10

12.2 Maintenance....................................... 12

13 Cleaning...................................................... 12

13.1 Safety information................................ 12

13.2 Procedure........................................... 13

14 Deinstallation/dismantling............................... 13

15 Disposal ...................................................... 13

16 EU Declaration of conformity ........................... 13

17 Commissioning Report.................................... 13

General information | 1

1 General information

1.1 Notice symbols

Danger

Direct hazard

Failure to comply with this warning will lead

directly to death or to serious injury.

Caution

Hazard with a low risk

Failure to comply with this warning may lead to

moderate injuries.

Warning

Potential hazard

Failure to comply with this warning may lead to

death or serious injury.

Important

Hazard with risk of damage to objects

Failure to comply with this warning will lead to

damage to objects.

Note:

Useful information and instructions

1.1.1 Instruction symbols

Instruction Instruction with xed sequence

♦Carry out this action 1. Carry out this action 3. (if applicable, further actions)

♦(if applicable, further actions) 2. Carry out this action

2 Important safety information

Planners, plant builders and operators are responsible for the proper assembly and intended use.

♦Read the operating instructions completely and carefully.

♦Keep the operating instructions and other valid documents, such as the circuit diagram or motor instructions, with

the fan. They must always be available at the place of use.

♦Observe and respect local conditions, regulations and laws.

♦Abide by the system-related conditions and requirements of the system manufacturer or plant constructor.

♦Safety elements may not be dismantled, circumvented or deactivated.

♦Only use the fan in a awless condition.

♦Provide generally prescribed electrical and mechanical protective devices.

♦During installation, electrical connection, commissioning, troubleshooting, and maintenance, secure the location and

premises against unauthorised access.

♦Do not circumvent any safety components or put them out of action.

♦Keep all the warning signs on the fan complete and in a legible condition.

♦The device is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given supervision or instruction.

♦Do not allow children to play with the device.

2.1 Personnel

The fan may only be used by qualified, instructed and trained personnel. The persons must know the relevant safety di-

rectives in order to recognise and to avoid risks. The individual activities and qualifications can be found in Table 1 Qual-

ifications, page 2.

| 002

2|Warranty

Table 1 Qualifications

Activities Qualifications

Storage, operation, transport, cleaning, disposal Trained personnel (see following note)

Electrical connection, commissioning, electrical

disconnection Electrical expert or matching qualification

Installation, disassembly Fitter or matching qualification

Maintenance Electrical expert or matching

qualification

Fitter or matching

qualification

Repair

Electrical expert or matching

qualification

Fitter or matching

qualification

Smoke extraction fans and EX fans only by agreement with

Systemair.

Note:

The operator is responsible for ensuring that personnel are instructed and have understood the contents of

the operating instructions. If something is unclear, please contact Systemair or its representative.

2.2 Personal protective equipment

♦Wear protective equipment during all work in the vicinity of the fan.

• protective working clothes

• protective working shoes

• protective working gloves

• helmet

• goggles

• hearing protection

2.3 5 rules of electrical safety

1. Disconnect (disconnection of

the electrical system from

live components at all

terminals)

2. Prevent reactivation

3. Test absence of voltage

4. Ground and short-circuit

5. Cover or restrict adjacent live parts

3 Warranty

For the assertion of warranty claims, the products must be correctly connected and operated, and used in accordance

with the data sheets. Further prerequisites are a completed maintenance plan with no gaps and a commissioning re-

port. Systemair will require these in the case of a warranty claim. The commissioning report is a component of this

document. The maintenance plan must be created by the operator, see section 12.2 Maintenance, page 12.

4 Delivery, transport, storage

Safety information

Warning: Risk from rotating fan blades

♦Prevent access by unauthorised persons by safety personnel or access protection.

Warning: Suspended loads

♦Do not walk under suspended loads.

♦Make sure that there is nobody under a suspended load.

Delivery

Each fan leaves our plant in an electrically and mechanically proper condition. We recommend transporting the fan to

the installation site in the original packaging.

Checking delivery

♦Check the packaging and the fan for transport damage. Any findings should be noted on the cargo manifest.

♦Check completeness of the delivery.

| 002

Delivery, transport, storage | 3

Unpacking

Warning

When opening the transport packaging, there is a risk of damage from sharp edges, nails, staples,

splinters etc.

♦Unpack the fan carefully.

♦Check the fan for obvious transport damage.

♦Only remove the packaging shortly before assembly.

Transport

Safety information

Warning: Electrical or mechanical hazards due to fire, moisture, short circuit or malfunction.

♦Never transport the fan by the connecting wire, terminal box, impeller, protection grille, inlet cone or silencer.

♦In open transport, please make sure that no water can penetrate into the motor or other sensitive parts.

♦We recommend transporting the fan to the installation site in the original packaging.

Caution: If transported without care during loading and unloading, the fan may be damaged.

♦Load and unload the fan carefully.

♦Use hoisting equipment that is suitable for the weight to be hoisted.

♦Observe the transportation arrows on the packaging.

♦Use the fan packaging exclusively as transport protection and not as a lifting aid.

Storage

♦Store the fan in the original packaging in a dry, dust-free location protected against weather.

♦Avoid the effects of extreme heat or cold.

Important

Hazard due to loss of function of the motor bearing

♦Avoid storing for too long (recommendation: max. 1 year).

♦Check that the motor bearing functions properly before installation.

| 002

4|Description

5 Description

1 1

1Motor ventilation air inlet

2Motor ventilation air outlet

3Drain in horizontal position

4Drain in vertical position

5.1 Dimension

Table 2 Dimensions

[mm] A B ØC ØD ØE ØF G H K L ØM

DVP 200DD2–4 435 330 200 355 662 200 119 1065 146 30 4x10

DVP 250DD2–4 595 450 250 400 768 250 119 981 181 30 4x12

DVP 315D4–8 665 535 315 560 810 315 218 1161 200 30 4x12

DVP 400D4–8

DVP 400D4–8–L 939 750 400 601 976 400 218 1134 235 30 4x14

| 002

Description |5

5.2 Technical data

Max. ambient temperature [°C]

see data sheet, available in our online catalogue.Max. temperature of transported air [°C]

Sound pressure [dB]

Voltage, current, frequency, enclosure class, weight see name plate of the fan

The motor data can be found on the name plate of the motor, or in the technical documents of the motor

manufacturer.

The data on the name plate of the fan apply to "standard air" according to ISO 5801.

5.3 Chemical components

The standard variants of the plastic used are polypropylene (PP). As a matter of principle, the rotor material is the indi-

cator for the selection.

Note:

The list “COMPATIBILITY WITH CHEMICAL AGENTS” is available in our online catalogue. This list has been

produced to the best of our knowledge, all statements without guarantee for correctness. Examination of

the media to be transported is a matter for the plant operator. Here, it is merely a question of a

recommendation.

5.4 Intended use

• The fans have been developed and built to convey air with the simultaneous presence of corrosive gases/vapours.

• The fans are intended for installation in ventilation systems. They can be installed both in duct systems and also with

free suction via a suction-side contact protection grille. Free discharge via a contact protection grille is also possible.

• The fans are exclusively intended for extract air applications.

5.5 Incorrect use

Incorrect use refers mainly to using the fan in another way to that described. The following examples are incorrect

and hazardous:

• Conveying of abrasive, explosive, combustible air or

air with solid particles.

• Operation in an explosive atmosphere

• Operation without duct system or protection grille

• Operation with the air connections closed

| 002

6| Name plate and type key

6 Name plate and type key

1Type designation

DVP 400D4-8L

V14172

1902951

1440720

1850

608152

EXE 3

PPH

2018Year/Annee de fab:

Type :

N°fab/Fab number :

Execution :

Vit.Turb./Imp.Speed:

Debit/Flow :

Press.Stat/Pressure:

Puiss./Power inst.:

T ° max °C:

Turb/Impeller:

Volute/Casing:

Vit.Rotation/Speed Maxi: tr/min-rpm

m3/h

tr/min-rpm

made in France/UE

IP55

ØImpeller:

Poids total/

Total weight:

71 Kgs

560 mm

2Production number

3 Execution

4Impeller speed

5Air volume

6 Pressure

7Input power

8Max. temperature of

transported air

9Material casing

10 Material impeller

11 Max. speed of impeller

12 Weight

13 Enclosure class

Table 3 Type key

DVP 200 D2–4 -

-Normal power version

-L More power version

Motor type

D2–4 Dahlander motor / 2–4 poled / 3 phased

D4–8 Dahlander motor / 4–8 poled / 3 phased

Flange diameter

Fan type

DVP Roof fan plastic

| 002

This manual suits for next models

Table of contents

Other System air Fan manuals

System air

System air fantech Rn2SL User manual

System air

System air DVN 355 Manual

System air

System air Essvent S Manual

System air

System air KBR Manual

System air

System air DVG EC F400 Manual

System air

System air CFC User manual

System air

System air DVV-Ex Operating instructions

System air

System air MAXK Series User manual

System air

System air SAVE VSR 150/B Manual

System air

System air AXS Series User manual

System air

System air fantech ProPLUS Series User manual

System air

System air SAVE VSC 100 User manual

System air

System air VH07 Manual

System air

System air Fantech SHR Series User manual

System air

System air AR 200E2 sileo User manual

System air

System air IV-50 EC User manual

System air

System air Fantech Rn2X User manual

System air

System air RVF 100 Manual

System air

System air DVEX Series Manual

System air

System air fantech RVF Series User manual

System air

System air SAVE VTR 275/B User manual

System air

System air SAVE VSR 150/B User manual

System air

System air RVF Operating manual

System air

System air DVG-V-EC Series Guide

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual