Synology DiskStation DS2419+ Manual

Synology DiskStation DS2419+

Hardware Installation Guide

Table of Contents

Chapter 1: Before You Start

Package Contents 3

Synology DiskStation at a Glance 4

Safety Instructions 5

Chapter 2: Hardware Setup

Tools and Parts for Drive Installation 6

Install Drives 6

Start Up Your DiskStation 9

Add a RAM Module on DiskStation 10

Add a Network Interface Card 13

Replace System Fan 16

Chapter 3: Install DSM on DiskStation

Install DSM with Web Assistant 17

Learn More 17

Appendix A: Specications

Appendix B: LED Indicator Table

Synology_HIG_DS2419+_20180419

Thank you for purchasing this Synology product! Before setting up your new DiskStation, please check the

package contents to verify that you have received the items below. Also, make sure to read the safety instructions

carefully to avoid harming yourself or damaging your DiskStation.

Package Contents

Main unit x 1 AC power cord x 1

RJ-45 LAN cable x 2

Screws for 2.5” drives x 52

Drive tray key x 2

Before You Start 1

Chapter

4Chapter 1: Before You Start

Synology DiskStation at a Glance

No. Article Name Location Description

1 Status Indicator

Front Panel

Displays the status of the system. For more information, see "Appendix B:

LED Indicator Table".

2 Alert Indicator Displays warnings regarding fan or temperature. For more information, see

"Appendix B: LED Indicator Table".

3 Power Button

1. Press to power on the DiskStation.

2. To power o󰀨 the DiskStation, press and hold until you hear a beep sound

and the Power LED starts blinking.

4 LAN Indicator Displays the status of the network connection. For more information, see

"Appendix B: LED Indicator Table".

5 Drive Status Indicator Displays the status of the installed drive. For more information, see "Appendix

B: LED Indicator Table".

6 Drive Tray Install drives (hard disk drives or solid state drives) here.

7 Drive Tray Lock Lock or unlock drive trays.

8 Power Port

Back Panel

Connect the AC power cord here.

9 Fan Disposes of excess heat and cools the system. If the fan malfunctions, the

DiskStation will emit a beeping sound.

10 PCI Express

Expansion Slot Supports one PCIe x8 slot (x4 link) add-on card.

11 USB 3.0 Port Connect external drives or other USB devices to the DiskStation here.

12 RESET Button

1. Press and hold until you hear a beep sound to restore the default IP

address, DNS server, and password for the admin account.

2. Press and hold until you hear a beep sound, then press and hold again

until you hear three beep sounds to return the DiskStation to “Not Installed”

status so that DiskStation Manager (DSM) can be reinstalled.

13 Console Port This port is used for manufacturing use only.

14 Expansion Port Connect Synology Expansion Unit1to the DiskStation here.

15 LAN Port Connect network cables here.

1For more information about Synology Expansion Unit supported by your DiskStation, please visit www.synology.com.

5Chapter 1: Before You Start

Safety Instructions

Keep away from direct sunlight and away from chemicals. Make sure the environment does not

experience abrupt changes in temperature or humidity.

Place the product right side up at all times.

Do not place near any liquids.

Before cleaning, unplug the power cord. Wipe with damp paper towels. Do not use chemical or

aerosol cleaners.

To prevent the unit from falling over, do not place on carts or any unstable surfaces.

The power cord must plug in to the correct supply voltage. Make sure that the supplied AC voltage is

correct and stable.

To remove all electrical current from the device, ensure that all power cords are disconnected from

the power source.

Risk of explosion if battery is replaced with an incorrect type. Dispose of used batteries appropriately.

Tools and Parts for Drive Installation

• A screwdriver (only for 2.5” drives)

• At least one 3.5” or 2.5” SATA drive (please visit www.synology.com for compatible drive models.)

Warning: If you install a drive that contains data, the system will format the drive and erase all existing data. Please

back up any important data before installation.

Install Drives

1 Press the right part of the drive tray to pop out the handle.

2 Pull the drive tray handle in the direction as indicated below to remove the drive tray.

Hardware Setup

Chapter

7Chapter 2: Hardware Setup

3 Load drives in the drive trays.

• For 3.5” drives: Remove the fastening panels from the sides of the drive tray. Place the drive in the drive

tray. Then insert the fastening panels to secure the drive in place.

• For 2.5” drives: Remove the fastening panels from the sides of the drive tray and store them in a safe

place. Place the drive in the blue area (shown below) of the drive tray. Turn the tray upside down and tighten

the screws to secure the drive in place.

4 Insert the loaded drive tray into the empty drive bay.

Note: Make sure the tray is pushed in all the way. Otherwise, the drive might not be able to function properly.

5 Press the handle in ush with the front panel to hold the drive tray in place.

8Chapter 2: Hardware Setup

6 Insert the drive tray key into the drive tray lock, turn the key clockwise (to the “-” position) to lock the handle of

the drive tray, and then remove the key.

7 Repeat the steps above to assemble the other drives you have prepared.

8 Drives are numbered as shown below.

Note: If you want to create a RAID volume, we recommended that all installed drives are of the same size to make the

best use of drive capacity.

9Chapter 2: Hardware Setup

Start Up Your DiskStation

1 Use the LAN cable to connect the DiskStation to your switch, router or hub.

2 Connect one end of the AC power cord to the power port of the DiskStation, and the other to the power outlet.

3 Press the power button.

Congratulations! Your DiskStation is now online and detectable from a network computer.

10 Chapter 2: Hardware Setup

Add a RAM Module on DiskStation

The optional Synology DDR4 RAM module is designed for DiskStation memory expansion. Follow the steps

below to install, check, or remove a RAM module on your DiskStation.

To install the RAM module:

1 Press and hold the power button until you hear a beep sound to shut down your DiskStation. Disconnect all

cables from your DiskStation to prevent any possible damage.

2 Remove the side panel:

a Remove the 2 screws on the back of DiskStation.

b Pull the side panel. Place the side panel to the side.

Note: When you remove the case, you expose sensitive internal components. Avoid touching anything other than the

memory assembly when you remove or add memory.

Table of contents

Other Synology Storage manuals

Synology

Synology DiskStation DS213+ User manual

Synology

Synology DiskStation DS415+ User manual

Synology

Synology DiskStation DS214se User manual

Synology

Synology NAS DS220+ Manual

Synology

Synology DiskStation DS218 Manual

Synology

Synology DiskStation DS214 User manual

Synology

Synology DiskStation DS411slim User manual

Synology

Synology RackStation RS3412xs User manual

Synology

Synology RackStation RS2423RP+ User manual

Synology

Synology CS-406 User manual

Synology

Synology DS223 User manual

Synology

Synology DiskStation DS1618+ Manual

Synology

Synology VS80 User manual

Synology

Synology DiskStation DS419slim Manual

Synology

Synology RS3413xs+ User manual

Synology

Synology Disk Station DS1010+ User manual

Synology

Synology DS3611xs User manual

Synology

Synology diskstation DS416J User manual

Synology

Synology DS109j User manual

Synology

Synology DiskStation DS415play User manual

Synology

Synology DS923+ User manual

Synology

Synology DiskStation DS216j User manual

Synology

Synology DiskStation DS716+II User manual

Synology

Synology DiskStation DS218play Manual

Popular Storage manuals by other brands

QNAP

QNAP TS 32PXU Series user guide

LaCie

LaCie RUGGED RAID user manual

Freecom

Freecom CLS DOCK Quick install guide

PNY

PNY Attache P-FD64MBATT3 install guide

HP StorageWorks MSL2024 Getting started

OLT

OLT 6x6 Maximizer Assembly manual

Transcend

Transcend JetFlash 160 Specifications

LaCie

LaCie RUGGED MINI user manual

Thunderbolt

Thunderbolt 600 user manual

Panasonic

Panasonic LB-DH8 series Operator's guide

Intel

Intel RAID High Availability user guide

LaCie

LaCie 12big Thunderbolt 3 Quick install guide

Spectra Logic

Spectra Logic T-Series Spectra T50e quick start guide

Panasonic

Panasonic LKM-F931-1 instruction manual

Tabernus

Tabernus Enterprise Erase E2400 user guide

Rocstor

Rocstor COMMANDER 3F series user manual

HP P9000 user guide

Western Digital

Western Digital Ultrastar Data60 installation guide