Symbol MC70 User manual
User's Manual
Symbol MC70
Copyright Prevas AB 2005
This description is produced by Prevas AB
KS011p03b09/en V1
Prevas AB
Box 1909
S-651 19 Karlstad
Sweden
Phone: +46 54 147400
Fax: +46 54 147499
Contents
System Overview 7
SAM PC and PPC............................................................................................................... 7
Operating System Functions 8
Leaving SAM...................................................................................................................... 8
Volume Control.................................................................................................... 9
Buttons................................................................................................................ 10
Sounds & Notifications....................................................................................... 10
Backlight ............................................................................................................ 11
Clock .................................................................................................................. 11
Regional settings................................................................................................. 12
Keyboard .......................................................................................................................... 12
Enable Keyboard................................................................................................ 12
Synchronizing 15
Partnerships....................................................................................................................... 15
Setting up a Partnership...................................................................................... 15
Glossary of Terms 19
Symbol MC70 - User's Manual System Overview - SAM PC and PPC •
••
•7
System Overview
SAM PC and PPC
The SAM system consists of a PocketPC with SAM software that collects data
that shall be transferred to Tracy.
ActiveSync from Microsoft is used to transfer the data (files) to the PC when the
PocketPC is docked into the cradle.
The program in the desktop PC loads these files containing unit-data from the
site and what actions are to be performed on the units.
The software in the PocketPC is described in this User Guide and ActiveSync in
the Help section in the application itself.
Pressing one of the three yellow buttons activates the scanner.
8 •
••
•Operating System Functions - Leaving SAM Symbol PPC - User's Manual -
Operating System Functions
Leaving SAM
You must switch from the SAM program to the operating system to display these
functions, since they are a part of the operating system and not SAM.
To switch to the operating system, tap on the X-icon in the top right corner.
To leave AppCenter, use the menu in the lower right corner on the screen.
Select: Tools | Exit... and type in the password: symbol
Battery Indicator
When AppCenter is running, battery indicator is displayed in the top:
Symbol MC70 - User's Manual Operating System Functions - Leaving SAM •
••
•9
Calculator
Tapping on the calculator icon starts the calculator:
Volume Control
By tapping on the loudspeaker a volume control is displayed. Use the slider to set
the preferred volume.
10 •
••
•Operating System Functions - Leaving SAM Symbol PPC - User's Manual -
Buttons
This setting is used to define the application buttons (the physical buttons below
the screen).
You reach the setting like this: Setting | Personal | Buttons
Different settings can be selected but we recommend following settings.
The following setting is required for SAM to work properly; any other setting
will cause SAM to switch to the operating system if they are pressed:
Sounds & Notifications
Setting for the volume and alarm.
You reach the setting like this: Setting | Personal | Sounds & Notifications
Symbol MC70 - User's Manual Operating System Functions - Leaving SAM •
••
•11
Backlight
It is recommended that backlight should be switched on when a button is pressed
or the screen is tapped.
You reach the setting like this: Setting | System | Backlight
Clock
It is recommended to have the correct date and time on the PPC. Files will
receive the date and time when saved, and some dates stored in the database will
be based on the time of scanning.
You reach the setting like this: Setting | System | Clock & Alarms
Other manuals for MC70
4
Table of contents
Other Symbol Handheld manuals
Symbol
Symbol PTC-1800 Installation and operation manual
Symbol
Symbol PDT 7200 Series Installation and operation manual
Symbol
Symbol MC9090-G RFID User manual
Symbol
Symbol PDT 8100 Series Installation and operation manual
Symbol
Symbol MC1000 User manual
Symbol
Symbol PPT 2700 Series Installation and operation manual
Symbol
Symbol MC9000-G Installation and operation manual
Symbol
Symbol PDT 8100 Series User manual
Symbol
Symbol PDT 8000 Series User manual
Symbol
Symbol MC909X Assembly Instructions
Symbol
Symbol ORG SPT 1550 User manual
Symbol
Symbol PDT 8000 Installation and operation manual
Symbol
Symbol SPT 1500 User manual
Symbol
Symbol PDT 8100 Series Installation and operation manual
Symbol
Symbol MC3504 User manual
Symbol
Symbol MC3090G - Win CE 5.0 Core User manual
Symbol
Symbol Series 6800 Installation and operation manual
Symbol
Symbol MC9090-G RFID User manual
Symbol
Symbol MC50 Assembly Instructions
Symbol
Symbol Workabout Pro4 User manual
