Symbol LS1902-T Owner's manual

BARCODE SCANNER

Programming the LS1902-T & LS2208 for use with

StarShip

These instructions are for the Symbol LS1902-T & LS2208 Barcode scanner

ONLY!

The following instructions will allow the user to scan a bar-coded

Invoice\Order number into Starship and automatically “press” the Enter key.

Repetitive keystrokes such as SAVE, DEFER, REPEAT, and NEXT can

also be programmed. These repetitive keystrokes can be scanned using the

preprinted Barcodes at the end of these instructions.

You must tell the scanner what kind of keyboard connection you are using

by scanning the appropriate Barcode on the following page. Connect the

scanner to the PC and Keyboard while the PC is on (see page 1-6 of the

Online Manual for connection instructions). IMPORTANT: The keyboard

will be disabled until you scan one of the Barcodes on the next page.

The “ENTER” command must be programmed before any of the other

commands are entered. To program a command, “scan” each barcode in

order on that page. If you do not hear a beep or series of beeps, the scanner

did not read the barcode. Try scanning the barcode at different angles until

you hear the beep(s). If you make a mistake, scan the last barcode on that

page and start at the beginning of that page again. To reset the scanner back

to Factory Defaults scan this barcode:

“ENTER” Command

Scan these barcodes FIRST in order 1 through 10. If you make a mistake

just scan number 10 and start over at number 1. This command allows you to

scan an Invoice/Order number with an “Enter” command at the end.

IMPORTANT: Do not program an “Enter” command into your

Invoice\Order number Barcode.

SAVE

Scan these barcodes in order 1 through 11. If you make a mistake, scan the

last barcode and start again. The “SAVE” Barcode allows you to scan the

“SAVE” command in without using the keyboard or mouse. The “SAVE”

barcode can be found at the end of these instructions and should be posted in

a convenient place

DEFER

Scan these barcodes in order 1 through 12. If you make a mistake, scan the

last barcode and start again. The “DEFER” Barcode allows you to scan the

Defer command without using the keyboard or mouse. The “DEFER”

Barcode can be found on the last page of these instructions.

NEXT

Scan these barcodes in order 1 through 12. If you make a mistake, scan the

last barcode and start again. The “NEXT” Barcode allows you to enter

multiple packages without clicking on the Next button in Starship. The

“NEXT” Barcode can be found on the last page of these instructions.

REPEAT

13)

Scan these barcodes in order 1 through 13. If you make a mistake, scan the

last barcode and start over. The “REPEAT” barcode allows you to repeat the

package “x” amount of times (x being the number of packages) The

“REPEAT” barcode can be found on the last page of these instructions.

This manual suits for next models

1

Table of contents

Other Symbol Barcode Reader manuals

Symbol

Symbol DS 6608 Installation and operation manual

Symbol

Symbol Symbol LS9208i User manual

Symbol

Symbol LS3578-FZ20005WR User manual

Symbol

Symbol LS9203 Installation and operation manual

Symbol

Symbol US AUTOMATION EP-1 User manual

Symbol

Symbol LS 4208 User manual

Symbol

Symbol TC70 User manual

Symbol

Symbol LS3578-FZ - Symbol - Wireless Portable Barcode... User manual

Symbol

Symbol LS 2106 Installation and operation manual

Symbol

Symbol SYMBOL MINISCAN MSXX04 Quick setup guide

Symbol

Symbol LS 4208 User manual

Symbol

Symbol Cyclone M2004-I200 User manual

Symbol

Symbol CS1504 User manual

Symbol

Symbol MiniScan MS-220X Quick setup guide

Symbol

Symbol LS1203 User manual

Symbol

Symbol LS4278 User manual

Symbol

Symbol 3100 Series Installation and operation manual

Symbol

Symbol LS 5800 User manual

Symbol

Symbol DS3508 User manual

Symbol

Symbol P470/P370 Installation and operation manual

Symbol

Symbol SPS 3000 Series Manual

Symbol

Symbol LS1900 Series Installation and operation manual

Symbol

Symbol SYMBOL MS120XFZY User manual

Symbol

Symbol LS 2100 Series User manual

Popular Barcode Reader manuals by other brands

POSMicro

POSMicro Datalogic PowerScan D7100 manual

Marson

Marson MT780 Integration guide

NCR

NCR RealPOS user guide

Motorola

Motorola SE3300 Integration guide

Element

Element P130BT user manual

Motorola

Motorola Symbol LS3008 Product reference guide

Meec tools

Meec tools OBD-II / VAG operating instructions

SICK

SICK CLP 100 operating instructions

Royal Tag SA

Royal Tag SA I-Read user manual

Welch Allyn

Welch Allyn IMAGETEAM 3800 user guide

Meteor

Meteor 8310 user manual

Denso

Denso BHT-500B user manual

Datalogic

Datalogic Heron HD3130 Quick reference guide

Motorola

Motorola MP6000 Integrator guide

Newland

Newland NLS-HR15-BT user guide

ARTDEV

ARTDEV AS-1310 quick guide

Aopos

Aopos AS290 user manual

ENS

ENS 367-5455 installation instructions