Swegon DOMO C Guide

Other Swegon Fan manuals

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual

1

DOMOTM

c

Installation - Commissioning - Maintenance 20150715 / Art. 1545178

Installation

Remove the diffuser face and set the required diffusion pattern.

Note that the transparent air deﬂector has a slightly wedge-sha-

ped cross section. Install the deﬂector so that its thinner edge is

positioned towards the bottom of the air diffuser. Press the air

diffuser to secure it to the duct or joint. It will then be held in

place by its built-in spring clips. If required, the air diffuser can

be secured by screws to the duct or to the wall/ceiling. Ultima-

tely, reﬁt the front. See Figures 2 to 5.

NOTE! Never apply any pressure to the diffuser face (cover).

Commissioning

Commissioning must be carried out after the diffuser has been

mounted and completely assembled. Remove the diffuser face

and connect the measurement hose to the measurement tap-

ping and to a manometer. Then reﬁt the diffuser face. The air

ﬂow can be determined using the C-factor of the air diffuser. If

necessary, break off one or more rings from the commissioning

plate to increase the air ﬂow. See table 1. K-factors are speciﬁed

on the product’s identiﬁcation label and in this document.

Maintenance

The air diffuser can be cleaned, if necessary, using lukewarm

water with dishwashing detergent added. The duct system can

be accessed after removing the diffuser face and the commis-

sioning plate.

Figure 1. Separable commissioning plate. R1-4 illustrates the dif-

ferent commissioning options with measuring socket positioned

at 3 o’clock.

Calculating airﬂow using K-factor:

q = k • √pi[l/s] pi= ( q)2[Pa]

q = ﬂow reading (l/s)

pi = current pressure reading (Pa)

k = commissioning factor

k

Table 1 – Commissioning quick guide

White ﬁelds indicate sound levels lower than 30 dB(A).

K indicates K-factor (COP).

Pressure in

measuring tube (Pa)

Air ﬂow (l/s)

R1

K = 1,3

R2

K = 2,3

R3

K = 3,3

R4

K = 3,9

10 4 7 10 12

20 610 15 17

30 713 18 21

40 815 21 25

50 916 23 25

60 10 18 26 30

70 11 19 28 33

= measuring socket

R1 R2

R3 R4

Table 2 – Duct connection alternatives

Placement of the measuring socket depending on duct connec-

tion alternatives.

Duct connection Positioning of the

measuring socket

straight connection 3 or 9 o’clock

90° bend, connection up/down 3 or 9 o’clock

90° bend, connection left/right 6 or 12 o’clock

2

DOMO

Swegon reserves the right to alter speciﬁcations. 20150715 www.swegon.com

Dimensions and weights

Dimensions (mm) Weight (g)

ABCØd

160 44 44 99 365

Figure 6. Dimensions, DOMO.

p

t

Pa

20 30 40 50 100 m

3

/h

510 20 30 40 l/s 50

4

5

10

20

30

40

50

100

200

DOMOa 100

20

25

30

35

40 dB(A)

R1

R2

R3

R4

1V-vägg

2V-tak

234510

1V-tak

m

0,2

l

Figure 3. 1-way, ceiling mounting.

Figure 5. 2-way, in a corner, ceiling mounting.

Figure 4. 1-way, wall mounting.

Air distribution patterns

Figure 2. Installation. Commissioning.

Distance to ceiling (A):

• Minimum dictance is 100 mm

• 100-150 mm results in 1,15 x l0,2

• More than 300 mm results in

0,8 x l0,2 (free-blowing)

Sizing diagram

• Throw l0.2 is measured under isothermal discharge conditions.

• 1-way mounted on wall is applicable for DOMO mounted

200 mm from the ceiling (measured from the top edge).

• Recommended max. permissible temperature below room

temperature is 3 K.

• dB (A) applies to rooms with normal acoustic, 4 dB room

attenuation / 10 m2equivalent absorption area.

1 way - wall

2 way - ceiling

1 way - ceiling