6
We recommend washing before initial use.
Before Washing or Storing Your heated product:
1Disconnect power cord from wall BEFORE detaching control cord from the heated product.
2Ensure that no cords are still connected and none of the wires have worn through the fabric.
3Carefully follow all washing instructions or your heated product may shrink and possibly
cause a fire hazard.
• DO NOT submerge control in water.
• DO NOT dry clean your heated product. Dry cleaning solvents may damage the wires.
• DO NOT use bleach or cleaning fluids.
• DO NOT use a wringer.
• DO NOT iron your heated product.
• DO NOT use mothballs or sprays of any kind.
• DO NOT reconnect the heated product or use it until it is COMPLETELY dry.
• DO NOT wash or put into water the power cord or any of the product’s cords.
Taking care of your heated product is easy and safe as long as you follow a few simple steps.
Machine Washing
1Presoak the blanket/mattress pad/throw for 15 minutes in mild soap and lukewarm water.
2Wash in mild soap and lukewarm water on the “delicate” or “gentle” cycle in the washer
for two minutes. Remember, do not use bleach.
3Rinse in fresh, lukewarm water.
4Spin dry in the washing machine. Then gently stretch to its original size.
Machine Drying
Caution: Do not use commercial dryers or the dryers at your local Laundromat.
They get too hot and would damage the wiring of the heated product.
1Preheat the dryer on the “low” temperature setting for 2 minutes.
2Place blanket/mattress pad/throw into the dryer and tumble dry for 10 minutes at a low temperature.
3Remove the blanket/mattress pad/throw while it is still damp and gently stretch it to its original size.
4Drape the heated product over a clothesline or a shower rod. DO NOT use clothespins.
5Heated product must be COMPLETELY dry before reconnecting the power plug or control plug.
Hand Washing
1Presoak the blanket/mattress pad/throw for 15 minutes in mild soap and lukewarm water.
2Gently squeeze the soap suds through a few times.
3Rinse in fresh, lukewarm water.
Hand Drying
1Gently stretch the blanket/mattress pad/throw back to its original size.
2Drape the heated product over a clothesline or hang over a shower rod. DO NOT use clothespins.
3Heated product must be COMPLETELY dry before reconnecting the power plug or control plug.
Care and Cleaning OF YOUR HEATED PRODUCT
For questions or support, please visit: www.sunbeam.com
BED6322 BeddingMan06-Just English.qxd 3/8/06 12:18 PM Page 10
