STONEFLY DR365V-1205L User manual
Setup Guide
DR365V - Backup & Disaster Recovery
Appliance
www.stonefly.com
www.iscsi.com
DR365V-1205L 12-bay / 2U Model
This Page is intentionally left blank.
Copyright © 2006-2020 StoneFly, Inc.
All rights are reserved. No part of this document may be photocopied or reproduced without
the prior written consent of StoneFly.
The information contained in this document is subject to change without notice. StoneFly
shall not be liable for errors contained herein or for consequential damages in connection
with the furnishing, performance, or use of this material.
StoneFly, the StoneFly logo, Storage Concentrator, Integrated Storage Concentrator, ISC,
Modular Storage Concentrator, StoneFly Backup Advantage, StoneFusion, StoneFly
Replicator CDP, ValueSAN, Unified Scale Out, USO, Super Scale Out, SSO, Twin Scale
Out, TSO, Unified Storage & Server, USS, Unified Deduplicated Storage, UDS, Unified
Encrypted Storage, UES, OptiSAN, StoneFly Voyager, DR365, DR365 Fusion, StoneFly
Mirroring, Storage Concentrator Virtual Machine, SCVM, Software-Defined Unified
Storage, SDUS, and StoneFly Cloud Drive are property of StoneFly, Inc.
Other brands and their products are trademarks or registered trademarks of their respective
holders.
StoneFly DR365V-1204 Getting Started Guide
V8.0.3x
©StoneFly Inc. 2020 | All rights reserved
Page 3
Introduction
Table of Contents
1.1 Introduction ...................................................................................................................... 5
1.1.1 Icons.......................................................................................................................... 6
2.1. Rack Installation Instructions........................................................................................... 8
2.2. Power Up & Initial Access............................................................................................. 13
2.3. Configuring IPMI KVM................................................................................................. 14
Accessing the IPMI Interface ................................................................................................ 18
2.4. VMware Management Network Configuration ............................................................. 21
2.5. Steps to Configure SCVM Management Port (VMware) .............................................. 29
2.6. Hyper-V Management Network Configuration ............................................................. 32
2.7. Steps to Configure SCVM Management Port (Hyper-V) .............................................. 37
2.8 KVM Management Network Configuration .................................................................. 41
2.9 Steps to Configure SCVM Management Port (KVM)................................................... 44
2.10 Configuring the SCVM .................................................................................................. 47
2.11 Configuring the Veeam Management VM..................................................................... 53
2.11.1 Assigning a Static IP Address to the Veeam Management VM ............................. 54
2.11.2 Enabling RDP on the Veeam Management VM..................................................... 57
2.11.3 Accessing Windows Server hosting Veeam ........................................................... 59
StoneFly DR365V-1204 Getting Started Guide
Introduction
V8.0.3x
©StoneFly, Inc. 2020 | All rights reserved
Page 4
Chapter-1: Introduction
StoneFly DR365V-1204 Getting Started Guide
V8.0.3x
©StoneFly Inc. 2020 | All rights reserved
Page 5
Introduction
1.1 Introduction
This document is aimed for system administrators who would like to know how to get started
with StoneFly DR365V Appliance. It describes initial steps for launching the appliance.
The StoneFly DR365V is the ideal purpose-built hyperconverged infrastructure solution for
backup and disaster recovery which also allows you to consolidate all of your server and backup
systems into one easy to manage appliance.
This guide gives an overview of the product, rack mounting instructions and initial installation
procedure. Information for using the features of the StoneFusion software is found in the Storage
Concentrator User Guide.
•StoneFly Resource Library
•The StoneFly SCVM™ Webpage
•Veeam Backup & Replication User Guide for VMware
•Veeam Backup & Replication User Guide for Hyper-V
Each StoneFly DR365V comes preconfigured with VMware vSphere or Microsoft Hyper-V
hypervisor, a StoneFly SCVM™ Virtual Storage Controller, and an Enterprise Backup Engine
running on a second VM. Additional Virtual Machines can be installed on the DR365V as
needed as long as adequate processing cores and system memory are available to support those
VMs. Contact your StoneFly sales representative for details.
DR365V-1204 12-Bay / 2U Model
The DR365V comes in five standard configurations:
•12-bay / 2U model features maximum of 12 x 3.5” SAS drives
•16-bay / 3U model features maximum of 16 x 3.5” SAS drives
•24-bay / 2U model features maximum of 24 x 2.5” SAS drives
•24-bay / 4U model features maximum of 24 x 3.5” SAS drives
•36-bay / 4U model features maximum of 36 x 3.5” SAS drives
StoneFly DR365V-1204 Getting Started Guide
Introduction
V8.0.3x
©StoneFly, Inc. 2020 | All rights reserved
Page 6
1.1.1 Icons
Icon Type Description
Note Special instructions or information
Warning Risk of system damage or a loss of data
V8.0.3x
©StoneFly, Inc. 2020 | All rights reserved
Page 7
StoneFly DR365V-1204 Getting Started Guide
Initial Installation
Chapter-2: Initial Installation
V8.0.3x
©StoneFly, Inc. 2020 | All rights reserved
Page 8
StoneFly DR365V-1204 Getting Started Guide
Initial Installation
2.1. Rack Installation Instructions
This section provides information on installing the StoneFly DR365V appliance into a rack or cabinet
with the rails provided. There are a variety of rack/cabinet units on the market, which may mean that the
assembly procedure will differ slightly. You should also refer to the installation instructions that came
with the rack unit you are using.
NOTE: This rail will fit a rack/cabinet between 26" and 33.5" deep.
Identifying the Sections of the Rack Rails
The StoneFly DR365V chassis package includes two rack rail assemblies in the rack mounting kit.
Each assembly consists of three sections: an inner rail that secures directly to the chassis, an outer
rail that secures to the rack, and a middle rail which extends from the outer rail. These assemblies are
specifically designed for the left and right side of the chassis.
Identifying the Outer Rail, Middle Rail and Inner Rail
(Left Rail Assembly Shown)
V8.0.3x
©StoneFly, Inc. 2020 | All rights reserved
Page 9
StoneFly DR365V-1204 Getting Started Guide
Initial Installation
Releasing the Inner Rail
Each inner rail has a locking latch. This latch prevents the server from coming completely out
of the rack when the chassis is pulled out for servicing. To mount the rail onto the chassis, first
release the inner rail from the outer rails.
Releasing the Inner Rail from the Outer Rails:
1.
Pull the inner rail out of the outer rail until it is fully extended as illustrated below.
2.
Press the locking tab down to release the inner rail.
3.
Pull the inner rail all the way out.
4.
Repeat for the other outer rail.
Extending and Releasing the Inner Rail
This manual suits for next models
1
Table of contents
Other STONEFLY Network Hardware manuals
STONEFLY
STONEFLY DR365V-1604 User manual
STONEFLY
STONEFLY DR365V-2404 User manual
STONEFLY
STONEFLY DR365-1204 User manual
STONEFLY
STONEFLY DR365V-HA User manual
STONEFLY
STONEFLY DR365V-HA User manual
STONEFLY
STONEFLY DR365V-3605 User manual
STONEFLY
STONEFLY ISC-1208s User manual
STONEFLY
STONEFLY ISC-808S User manual
Popular Network Hardware manuals by other brands
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL product manual
B&B Electronics
B&B Electronics ZXT9-IO-222R2 product manual
Yudor
Yudor YDS-16 user manual
D-Link
D-Link ShareCenter DNS-320L datasheet
Samsung
Samsung ES1642dc Hardware user manual
Honeywell Home
Honeywell Home LTEM-PV Installation and setup guide
