StarTech.com DH5102E User manual

10/100 Fast Ethernet

Dual Speed Hub

Installation Manual

DH5102E

DH8100E

DH16100E

Introduction

The StarTech.com Dual Speed Fast Ethernet desktop hubs are

small in size but big in value. They provide 2 powerful modes of

operation: dual speed mode, or extension mode. Extension mode

allows the hub to cascade from up to 100m away, breaking the

standard 10m hub distance limit of 100BaseT Ethernet. Each port

has 2 LED indicators that show the link speed and activity for

quick and easy monitoring.

Features

1. Consists of 1 internal 10Mbps Ethernet segment and 1 internal

100Mbps Fast Ethernet segment.

2. Supports auto-negotiation RJ45 ports which automatically sense

and select optimum speed and route data traffic to

corresponding internal segments.

3. Built in uplink port to connect with regular straight-through

cable to connect to another hub.

4. Built in internal switching function automatically switches data

traffic between devices running at different speed, as well as

establishes communications between ports running at 10Mbps

and 100Mbps.

5. Provides 1 Extension port that can be linked to another Fast

Ethernet hub up to 100 meters.

6. Wall mountable.

7. 2-year warranty.

Specifications

Standards IEEE 802.3, IEEE 802.3u

Connectors RJ45

Dimensions 5 port: 127 x 83 x 30 mm / 5.0 x 3.27 x 1.18 in.

8 port: 187 x 100 x 30 mm / 7.4 x 3.94 x 1.18 in.

16 port: 290 x 100 x 30 mm / 11.4 x 3.94 x 1.18 in.

Weight: 5 port: 180g / 0.40lb.

8 port: 370g / 0.81lb.

16 port: 480g / 1.16lb.

Operating

Humidity 10~95% (non-condensing)

Package Contents

1 x Fast Ethernet Switch

1 x external power adapter

LED

Installation

1. Connect a Category 5 patch cable to the RJ45 jack on your

computer’s network card. (The RJ45 jack looks like an over-

sized phone jack).

StatusLED Description Number of LED

PWR

(Power)

COL

Power is supplied

No Power

One for the

whole Hub

One for 10Mbps

segment and one

for 100Mbps

One for each port

Collision detected in this segment

No Collision

A valid link is established

Data packets received

No link is established

Port is running at 100Mbps

Not connected or running at 10Mbps

Lit

Off

Lit

Off

Lit

Flash

Off

Lit

Off

LNK/ACT

(Link/Activity)

COL/FDX

(Collision/Full Duplex)

2. Connect the other end of the cable to a numbered port on the

hub (not to the uplink port).

3. Once the network cable is connected to both ends and the

attached network device is powered on, the green LNK/ACT

LED light should be lit.

4. Repeat these steps for the remainder of the computers you

would like to network.

An uplink port is used to connect to another hub/switch using

regulat straight-through UTP cable.

Troubleshooting

1. Power LED is not lit

Check if the power cord is properly connected to the external

power adapter and the power outlet. Make sure the DC power

jack is firmly plugged into the power socket of the switch.

2. Link Status LED is not lit

Check the power switch of the devices connected to the hub;

make sure they are turned ON. Check the network cables; make

sure they are properly connected to the hub and the

network devices.

Check the network cables; make sure the cables comply with

EIA/TIA 568 specifications. Use straight-through Category 5

cables for 100Mbps connection and Category 3 or higher cables

for 10Mbps connection.

3. Collision LED flashes constantly

Remove all the network cables; connect the cables back one by

one to isolate the source of the collision.

Check the network cable, inferior cable quality will result in

excessive collision and error packets.

This manual suits for next models

Table of contents

Other StarTech.com Switch manuals

StarTech.com

StarTech.com C2-D46-UC2-CBL-KVM User manual

StarTech.com

StarTech.com STARVIEW SV231DDUSB User manual

StarTech.com

StarTech.com SV231U3A User manual

StarTech.com

StarTech.com SV441DUSBI User manual

StarTech.com

StarTech.com SV231DD2DUA User manual

StarTech.com

StarTech.com SV231DVIUAHR User manual

StarTech.com

StarTech.com ConvergeAV VS410HDMIE User manual

StarTech.com

StarTech.com ST3504USB User manual

StarTech.com

StarTech.com VS421HD4KA User manual

StarTech.com

StarTech.com MSTCDP123HD User manual

StarTech.com

StarTech.com ConvergeAV VS410HDMIE User manual

StarTech.com

StarTech.com MSTMDP123HD User manual

StarTech.com

StarTech.com MSTMDP124DP User manual

StarTech.com

StarTech.com VS221DP User manual

StarTech.com

StarTech.com HB30A3A1CST User manual

StarTech.com

StarTech.com 8STICUSB23216FD User manual

StarTech.com

StarTech.com DS154 System manual

StarTech.com

StarTech.com VS421HDDP User manual

StarTech.com

StarTech.com DS5107 User manual

StarTech.com

StarTech.com ST4100USB User manual

StarTech.com

StarTech.com ST4100USBBL User manual

StarTech.com

StarTech.com SV1110IPEXT Manual

StarTech.com

StarTech.com SV431DLU3A User manual

StarTech.com

StarTech.com 35BAYFWUSB System manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual