Stardom SA2TB3 User manual
Docking
User Manual
SA2TB3
» SA2TB3 User Manual...................................... 1
1. Operating Information .....................................................1
2. Package Contents and Product Views ............................1
3. The System Connections ................................................3
4. Hardware Requirements and Precautions ......................4
5. System Fan Failure Management ...................................4
6. The MSU, and easy RAID congurator ...........................4
7. Description of HDD Indicators ...................................... 10
8. Frequently Asked Questions .........................................11
» SA2TB3 產品使用說明 .....................................13
1. 環境需求 ....................................................................... 13
2. 產品外觀及包裝內容 ..................................................... 13
3. 硬體連結示意圖 ............................................................ 15
4. 注意事項 ....................................................................... 16
5. 風扇故障狀況排除......................................................... 16
6. MSU 簡易設定 .............................................................. 16
7. 燈號說明 ....................................................................... 22
8. 常見問題 ....................................................................... 23
SOHORAID SA2TB3 User Manual
V1.0
Docking SA2TB3 User Manual
1
1. Operating Information
The Introduction
Thanks for purchasing Stardom product. This User Manual will introduce you the SA2TB3
Thunderbolt™ storage product. Before using your SA2TB3, please read it thoroughly. Although
all information contented in this User manual had already been carefully veried before publishing,
however, the actual product and its specification will be based upon the time of delivery from
Stardom. Any update to the product or its relevant information may be listed on www.stardom.com.
tw . Product is subjected to change without prior notications.
If you have any question regarding to the product you purchased, or you would like to know the latest
product information, User Manual’s update, please contact to your local supplier or visit to www.
stardom.com.tw for further information.
Copyright © Raidon Technology, Inc. – All right is reserved.
Operating Temperature: 5 ～35 ℃(41 ～95 ℉)
Storage Temperature : -20 ～47℃(-4 ～116 ℉)
5% to 95% noncondensing
Line Voltage : 100 ～240V AC
2. Package Contents and Product Views
Open the package and you shall nd the following parts：
SA2TB3 Product Unit x1
Thunderbolt™ Cable x1
Power Cord x1
Quick Installation Guide x1
• Please check the product and accessories for any defect or missing parts. If you have any questions,
please contact your product supplier.
• Please visit the official website (www.stardom.com.tw) to download drivers and other related
resources.
Docking SA2TB3 User Manual
2
Power switch
Thunderbolt
™
port
Mini
DisplayPort
Power socket
Mnin-SAS
12G port
Fan
Front and Rear Views
Front View
Rear View
Docking SA2TB3 User Manual
3
SA2TB3 connects to Host (PC/Workstation/Server)
SA2TB3 connects to other Devices (TB, SAS)
3. The System Connections
Thunderbolt
™
daisy chain
up to 6 Thunderbolt devices
SAS 12G External Storage Enclosure
EX: STARDOM ST4-U6/ST8-U6
Docking SA2TB3 User Manual
4
1. Use your Windows username and password to log into the MSU. If you have a username but no
password, then leave the password eld blank.
4. Hardware Requirements and Precautions
1. Only one interface connection may be used at once per computer system.
2. Whenever turning off or unplugging your SA2TB3 from your computer system, please always
remember to safely remove it from your operating system rst.
3. While the In-chassis temperature reaches up to 55 degree-C (131 degree-F), in order to get rid of
the heat efficiently, your SA2TB3 will turn fan parts to full speed automatically.
And once the In-chassis temperature drops down to 50 degree-C (122 degree-F), you could
then set fan speed at Fan Speed Switch manually to reduce its fan noise for a better green
environment at both of a lower fan noise and the power saving.
4. If the computer is unable to detect the system, please install the drivers from official website
(www.STARDOM.com.tw)
Thru connecting your miniSAS device to SA2TB3, you could use this MSU (Marvell Storage Utility) to
congure a RAID mode.
6. The MSU, and easy RAID configurator
A. Set up RAID Mode:
5. System Fan Failure Management
If the alarm indicator has lit up red and the audio alarm sounds, this could mean that either a system
fan has stopped operating entirely. When this occurs, you may press the mute button at the rear
of the system to shut off the audio alarm and power off the system immediately if in the allowed
operational state to let the system cool. Check and see if the overall operation environment is well
ventilated and make sure there are no blockages to the enclosed fan and then re-power on the
system to continue use. If the problem persists, please turn o the system and contact your supplier
or the STARDOM tech support for further assistance.
Docking SA2TB3 User Manual
5
2. Click 【Operation】and 【Create Array】.
3. Click at the selected HDDs.
4. Select【RAID 5】（or other RAID）.
• The more Stripe Sizes helps a better data transfer for large data les which is
good for video and audio editing works.
• The less Stripe Sizes helps a better efficiency at randon les which is good for
daily word processing, frequent read-&-write works.
Docking SA2TB3 User Manual
6
5. Setup Stripe Size.
6. Type Storage Name and Submit RAID setting.
7. After submitting RAID setting:
Docking SA2TB3 User Manual
7
9. After submit, you get a New_VD.
8. Click 【Create VD】, 【Initialize】option is set to 【Fast Initialization】; 【Gigabyte Rounding】
options set to 【10G】, then click 【Submit】.
P.S. VD is the abbreviation of Virture Disk.
10.To initiate and format HDD/SSD at OS level.
No Initialization
Fast Initialization
Foreground Initialization
Background Initialization
Docking SA2TB3 User Manual
8
1. Click 【Operation】and 【Delete VD】.
2. Click 【OK】 at rst warning message.
B. Delete a RAID for a new RAID setting
11. After completing the format, you couyld start using your SA2TB3.
Other manuals for SA2TB3
1
Table of contents
Other Stardom Storage manuals
Stardom
Stardom Sohoraid SR4 User manual
Stardom
Stardom ZR2-BA31BP User manual
Stardom
Stardom SOHORAID ST2-TB3 User manual
Stardom
Stardom SOHORAID MR2-B31BP Series User manual
Stardom
Stardom SOHORAID SR4-SB3 User manual
Stardom
Stardom SOHORAID SR4-SB31+ User manual
Stardom
Stardom DR2-B31 User manual
Stardom
Stardom SOHORAID ST2-B31+ User manual
Stardom
Stardom SA2TB3 User manual
Stardom
Stardom ST5610 Series User manual
Stardom
Stardom SOHORAID MR2-B31BP Series User manual
Stardom
Stardom SOHORAID DR5-WBS3 User manual
Stardom
Stardom SOHORAID DR2-TB3 User manual
Stardom
Stardom SOHORAID SR2 User manual
Stardom
Stardom SOHORAID ST2-TB3 User manual
Stardom
Stardom SOHORAID SR4-SB3PLUS User manual
Stardom
Stardom SOHORAID SR8-TB3 User manual
Stardom
Stardom SOHORAID SR4-B31A User manual
Stardom
Stardom iTANK MT1-B31BP User manual
Stardom
Stardom SOHORAID DR8M-TB3 User manual
