Stalgast 770351 User manual
INDUCTION COOKER
Model: 770351
INSTRUCTION MANUAL
Stalgast sp. z o.o. ul. Staniewicka 5 03-310 Warsaw
v1.0-03.2010
- 2 -
TABLE OF CONTENTS
1. SAFETY INSTRUCTIONS ..........................................................................................................3
2. SECURITY CONDITIONS..........................................................................................................3
3. TECHNICAL DATA ....................................................................................................................4
4. ASSEMBLY ..................................................................................................................................4
4.1. Connection to the power supply source ............................................................................................................... 4
4.2. Placement of the device ........................................................................................................................................ 4
5. OPERATION................................................................................................................................4
6. ADDITIONAL INFORMATION..................................................................................................5
6.1. Vessels that can be used on the induction cooker: .............................................................................................. 5
6.2. Vessels that cannot be used on the induction cooker: ........................................................................................ 5
7. CLEANING AND MAINTENANCE ...........................................................................................5
8. ERRORS .......................................................................................................................................5
9. DISPOSING OF USED EQUIPMENT.........................................................................................6
10. WARR ANTY................................................................................................................................6
- 3 -
Thank you for purchasing our product. Please carefully read this instruction manual before rst use.
Reproduction of this manual without the consent of the manufacturer is prohibited.
The photos and drawings are illustrative and may differ from the purchased device.
Caution: The manual should be kept in a safe place, available to the staff. The manufacturer reserves the right to change the
technical parameters of the devices without prior notice.
1. SAFETY INSTRUCTIONS
•Incorrect operation and improper use may result in serious damage to the device or injuries to persons.
•The device should only be used for the purpose for which it was designed.
•The manufacturer assumes no liability for any damages caused by incorrect operation and improper use of the device.
•During operation the device and the power cable plug must be protected against contact with water or other liquids. If the
device accidentally falls into water, it is necessary to immediately pull out the plug from the socket, and then commission
the inspection of the device by a professional.
Failure to follow this instruction may lead to life-threatening situations.
•Never open the housing of the device by yourself.
•Do not stick any items into the housing of the device.
•Do not touch the power cord plug with wet hands.
•Regularly inspect the condition of the plug and the cable. In the event any damage to the plug or the cable is detected, it
should be repaired at a specialist repair point.
•In case the device falls or is damaged in any other way, before further use is always necessary for it to be inspected and
possibly repaired at a specialized repair point.
•Never try to repair the device by yourself – it could lead to life-threatening situations.
•Protect the power cable from contact with sharp or hot objects and keep it away from open ames. If you want to discon-
nect the device from the electrical socket, always grab it by the plug and never pull by the cord.
•Secure the cable (or its extension cord) to ensure that no one pulls it from the socket by mistake and that no one trips
over the cable.
•Control the operation of the device during use.
•Do not allow for the device to be used by minors, people with physical or mental disabilities and people with impaired mo-
bility, as well as persons without the appropriate experience and knowledge regarding the proper use of the device. Such
persons can operate the device only under the supervision of a person responsible for safety.
•If the device is not currently in use or is cleaned, it is necessary to always unplug it from the power source by removing the
plug from the socket.
•Caution: If the plug of the power cord is connected to the electrical socket, the device remains energized.
•Switch the device off before pulling the plug from the socket.
•Never pull the device by the power cord.
•Never remove the plug from the wall socket by pulling the power cord.
2. SECURITY CONDITIONS
•Do not pull the plug immediately after the operation of the device ends. It is necessary to wait 15 seconds for the cooker
to cool down.
•Do not move or shift the cooker when a pot or pan is placed on the device etc.
•Do not place metal objects such as knives, forks, spoons, lids, cans and aluminum foil etc. on the upper surface of the
cooker.
•Do not place any ammable materials such as paper between the heating plate and the vessel. This may cause a re.
•Do not touch the heating plate of the device directly after operation. The heating plate of the device will be hot!
•Do not place the cooker near devices sensitive to magnetic elds, such as radio sets, TVs, credit cards (their functioning
may be compromised).
•Do not block the ventilation holes of the device. The lack of ventilation can cause damage to the device.
•If the surface of the cook top is damaged, turn the device off and immediately take it to a repair workshop.
•Never place the device on a carpet or other ammable material.
•Never heat up empty pots in order to avoid burning them.
•Do not use the cooker near source of re or water.
- 4 -
3. TECHNICAL DATA
Power Supply Voltage 230 V / 50 Hz
Power 3500 W
dimensions WxDxH 325x425x100 mm
heating plate dimensions 273x275 mm
4. ASSEMBLY
4.1. Connection to the power supply source
The device should be connected to the power supply using a plug. The socket must be grounded and equipped with a residual-
current circuit breaker
4.2. Placement of the device
The device should be set on a level and stable surface. The device should be installed in a place that provides enough space
around it. Keep a minimum distance of 10 cm from other devices, walls, etc.
5. OPERATION
1. Place an appropriate cooking vessel on the heating plate of the induction cooker and connect it to an appropriate power
socket. Following connection to power supply, the indicator lamp under the „ON/OFF” sign should light up.
2. When activating the device using the ON/OFF button, the display screen will turn on and show the letter “L” or
“H”.
• Letter “L” means that the heating plate has a temperature below 50oC.
•Letter “H” means that the heating plate has a temperature above 50oC.
3. Select the POWER or TEMPERATURE parameters
•Select the desired power using the “POWER” button and adjusting it with the arrow buttons
(power range: 400, 800, 1100, 1400, 1700, 2000, 2300, 2600, 2900, 3200 and 3500 W ). The default power
setting when the cooker is activated is 1700 W.
•Select the desired temperature using the TEMPERATURE” button and adjusting it with the arrow buttons
(temperature range: 60, 80, 100, 120, 140, 160, 180, 200, 220 and 240°C). The default temperature
when the cooker activated is 120°C.
4. After setting the above parameters, you can set the operation time of the device by using the “TIME” function.
•In order to set the working time press the “TIME” button and adjust it with the arrow buttons
(time range of 0-120 minutes in increments of 5 minutes). After the set time expires the cooker will switch to
standby mode, signaling this with a sound alarm.
5. The device may heat up during use.
- 5 -
6. ADDITIONAL INFORMATION
6.1. Vessels that can be used on the induction cooker:
•steel cookware
•cast-iron cookware
•enameled iron cookware
•stainless steel cookware marked with the symbol
The vessels should have a at bottom measuring from 12 to 26 cm.
6.2. Vessels that cannot be used on the induction cooker:
Następujące naczynia nie mogą być używane na kuchence indukcyjnej:
1. vessels made of:
•heat-resistant glass
•copper
•aluminum
2. ceramic vessels
3. vessels with a rounded bottom
4. vessels with bottom dimensions smaller than 12 cm.
7. CLEANING AND MAINTENANCE
1. Disconnect the power supply and allow for the heating plate to cool down. The device should be cleaned after each use.
2. Do not use gasoline, solvents or products containing abrasives to clean the induction cooker.
3. The device may be cleaned using washing liquid and a damp cloth.
4. A vacuum cleaner or compressed air may be used in order to remove dust and contamination from the ventilation holes.
5. Do not immerse the device in water.
8. ERRORS
During the operation of the device, error messages may appear on the display. The table below explains the meaning of the
error messages.
Error code Cause and solution
E01 Power supply below 160 V. Report to a local electrician.
E02 Power supply over 270 V. Report to a local electrician.
E03 Damage of an electronic component of the device. Contact the authorized
service.
E06 Damage of an electronic component of the device. Contact the authorized
service.
- 6 -
E07 Cooking temperature exceeds 240oC when using the
“TEMP” function mode. After cooling down, the device automatically goes to
standby mode.
E08 An incorrect type of cookware is used (point 7.2). Use the right type of
cookware (point 7.1).
In order to reset the error, disconnect the device from the power supply and
then reconnect it.
The device is in the standby
mode, but there is no
indication on the display
and the device emits an
intermittent sound alarm.
An incorrect type of cookware is used (point 7.2). Use the right type of
cookware (point 7.1).
After the used vessel is changed, the device will return to standby mode.
In the event the solutions described in the table did not provide the desired result, please contact the authorized service.
9. DISPOSING OF USED EQUIPMENT
You can return your old device after the end of use or when buying a new device at Stalgast. Send the device to us and a
specialized company will dispose of it in accordance with the Waste Electrical and Electronic Equipment Act (Journal of Laws
of 2005, No. 180, item 1495).
10. WARR ANTY
The seller shall be liable under the warranty or guarantee.
Warranty exchange does not cover such elements as: light bulbs, rubber components, heating elements damaged by lime
scale, screws and elements undergoing natural wear, e.g. burners, rubber seals and all kinds of mechanically damaged
elements.
Table of contents
Other Stalgast Cooker manuals
