ST FP-SNS-SMARTAG1 User manual

Version 1.2 (Nov 6, 2019)

Quick Start Guide

STM32Cube function pack for IoT node with dynamic NFC tag,

environmental and motion sensors

(FP-SNS-SMARTAG1)

Quick Start Guide Contents 2

FP-SNS-SMARTAG1: STM32Cube function pack for IoT node with

dynamic NFC tag, environmental and motion sensors

Hardware and Software overview

Setup & Demo Examples

Documents & Related Resources

STM32 Open Development Environment: Overview

Hardware Overview 3

Sample implementations are available for:

1. STM32 Nucleo with expansion boards

•NUCLEO-L053R8 + X-NUCLEO-NFC04A1 + X-NUCLEO-

IKS01A2 (or X-NUCLEO-IKS01A3)

2. STEVAL-SMARTAG1 evaluation boards

Dynamic NFC/RFID tag IC expansion board

STM32 Nucleo with Expansion boards - Hardware overview (1/4) 4

X-NUCLEO-NFC04A1 Hardware Description

•The X-NUCLEO-NFC04A1 dynamic NFC/RFID tag IC

expansion board is based on the ST25DV04K NFC Type

V/RFID tag IC with a dual interface 4 Kbits EEPROM that

also features an I²C interface. It can be powered by the pin

of Arduino connector or directly by the received carrier

electromagnetic field.

•The X-NUCLEO-NFC04A1 expansion board is compatible

with the Arduino™ UNO R3 connector pin assignment and

can easily be plugged onto any STM32 Nucleo board.

Various expansion boards can also be stacked to evaluate

different devices operating together with the dynamic NFC

tag. The board also features an antenna with a 54 mm ISO

24.2 diameter, single layer, copper etched on PCB.

Arduino UNO R3 connector

Key products on board

ST25DV04KV

Dynamic NFC/RFID tag IC with 4-Kbit, 16-Kbit or 64-Kbit

EEPROM, and Fast Transfer Mode capability

Latest info available at www.st.com

X-NUCLEO-NFC04A1

ST25DV04K Printed Antenna

LPS22HB

HTS221

Key Product on board

LSM6DSL

MEMS 3D accelerometer (±2/±4/±8/±16 g) + 3D

gyroscope (±125/±245/±500/±1000/±2000 dps)

LSM303AGR

MEMS 3D magnetometer (±50 gauss) + MEMS 3D

accelerometer (±2/±4/±8/±16 g)

LPS22HB

MEMS pressure sensor, 260-1260 hPa absolute digital

output barometer

HTS221

Capacitive digital relative humidity and temperature

DIL 24-pin

Socket available for additional MEMS adapters and

other sensors (UV index)

DIL 24-pin

Motion MEMS and environmental sensors expansion board

STM32 Nucleo with Expansion boards - Hardware overview (2/4) 5

X-NUCLEO-IKS01A2 Hardware Description

•The X-NUCLEO-IKS01A2 is a motion MEMS and

environmental sensor evaluation board system.

•It is compatible with theArduino UNO R3 connector

layout, and is designed around ST’s latest sensors.

Arduino UNO R3 connector

ST morpho connector**

** Connector for the STM32 Nucleo Board

LSM6DSL

LSM303AGR

Latest info available at www.st.com

X-NUCLEO-IKS01A2

Motion MEMS and environmental sensors expansion board

STM32 Nucleo with Expansion boards - Hardware overview (3/4) 6

Key products on board

LSM6DSO

MEMS 3D accelerometer (±2/±4/±8/±16 g) + 3D

gyroscope (±125/±250/±500/±1000/±2000 dps)

LIS2DW12

MEMS 3D accelerometer (±2/±4/±8/±16 g)

LIS2MDL

MEMS 3D magnetometer (±50 gauss) +

LPS22HH

MEMS pressure sensor, 260-1260 hPa absolute digital

output barometer

HTS221

Capacitive digital relative humidity and temperature

STTS751

Digital Temperature sensor

DIL 24-pin

Socket available for additional MEMS adapters and other

sensors (UV index)

DIL 24-pin

X-NUCLEO-IKS01A3 Hardware description

•The X-NUCLEO-IKS01A3 is a motion MEMS and

environmental sensor evaluation board system.

•It is compatible with theArduino UNO R3 connector

layout, and is designed around ST’s latest sensors.

Arduino UNO R3 connector

ST morpho connector**

** Connector for the STM32 Nucleo Board

HTS221

LPS22HH LSM6DSO

LIS2DW12

Latest info available at www.st.com

X-NUCLEO-IKS01A3

LIS2MDL STTS751

Modifications on the X-NUCLEO-NFC04A1 board

Important Hardware Additional Information

STM32 Nucleo with Expansion boards - Hardware overview (4/4) 7

Before connecting the X-NUCLEO-NFC04A1 to the X-NUCLEO-IKS01A2 (or X-NUCLEO-IKS01A3) expansion board through

the Arduino UNO R3 extension connector, remove the resistors R2, R3 and R4 on the X-NUCLEO-NFC04A1 board, as

shown the Figure below.

ST NFC SensorTag Platform

STEVAL-SMARTAG1 evaluation board - Hardware Overview 8

STEVAL-SMARTAG1 Hardware Description

•STEVAL-SMARTAG1 is a flexible NFC Tracker evaluation board with sensors includes a comprehensive

software library and a sample application to monitor and log sensor data over NFC from an Android or

iOS device. Ultra-low power sensor node evaluation board mounts an ST25DV NFC Tag, an STM32L0

ARM Cortex M0+, environment sensors (temperature, humidity and pressure) and motion

(accelerometer) sensor.

•The evaluation board features NFC harvesting to supply power and a battery cradle for a CR2032

battery.

STLQ15M18R

Low dropout linear

regulator

STM32L031K6U6

ARM Cortes-M0+ 32bit

Microcontroller

LIS2DW12

Ultra–low power 3-axis

digital Accelerometer

LPS22HB

Low-power digital sensor for

ambient Pressure

HTS221

Capacitive digital sensor for

Relative Humidity and Temperature

ST25DV64K-JFR6D3

64Kbit dynamic

NFC/RFID tag

FP-SNS-SMARTAG1

Software Overview 9

Software Description

FP-SNS-SMARTAG1 is an STM32Cube function pack which allows

you to read the motion and environmental sensor data on your IoT

node via an NFC enabled reader such as a mobile phone or a tablet.

The package supports energy harvesting (enabled by NFC) and

battery operated use cases.

This software, together with the suggested combination of STM32 and

ST devices can be used, for example, to develop tracking, cold chain,

medical, smart sensing, and smart home, city and building

applications.

The software runs on an ultra-low power STM32L0 microcontroller and

includes Product summary drivers for the Dynamic NFC tag and for the

motion and environmental sensors.

Key features

•Complete firmware to access data from an IoT node with dynamic

NFC tag, environmental and motion sensors

•Ultra-low power operations, with support of both energy harvesting

and battery operated use cases

•Compatible with the ST NFC Sensor application for Android/iOS, to

read and display sensor data

•Sample implementation available for the STEVAL-SMARTAG1

evaluation board, and for the X-NUCLEO-IKS01A2 (or X-NUCLEO-

IKS01A3) and X-NUCLEO-NFC04A1 expansion boards connected to

a NUCLEO-L053R8 development board

•Easy portability across different MCU families thanks to STM32Cube

•Free user-friendly license term

Latest info available at www.st.com

FP-SNS-SMARTAG1

Overall Software Architecture

Quick Start Guide Contents 10

FP-SNS-SMARTAG1: STM32Cube function pack for IoT node with

dynamic NFC tag, environmental and motion sensors

Hardware and Software overview

Setup & Demo Examples

Documents & Related Resources

STM32 Open Development Environment: Overview

Other ST Microcontroller manuals

Popular Microcontroller manuals by other brands

AMS

AMS AS7261 Demo Kit user guide

Novatek

Novatek NT6861 manual

Espressif Systems

Espressif Systems ESP8266 SDK AT Instruction Set

Nuvoton

Nuvoton ISD61S00 ChipCorder Design guide

STMicrolectronics

STMicrolectronics ST7 Assembler Linker user manual

Texas Instruments

Texas Instruments Chipcon CC2420DK user manual

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM user guide

NEC

NEC 78GK0S/K 1+ Series Application note

Mikroe

Mikroe SEMITECH N-PLC Click Application note

Intel

Intel Agilex user guide

Cypress

Cypress CY4607 HX2VL quick start guide

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE manual

Texas Instruments

Texas Instruments TMS320F2837 D Series Workshop Guide and Lab Manual

CYPRES

CYPRES CY14NVSRAMKIT-001 user guide

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM user guide

Espressif Systems

Espressif Systems ESP8266EX Programming guide

Abov

Abov AC33M8128L user manual

Laird

Laird BL654PA user guide