8
Door Opening
▣
Password Exposure-proof Function (Built-in Dummy Number System)
- Password exposure-proof function :
By adding the dummy number function, remove a risk of password exposure.
- How to use the dummy number function :
Before inputting passwords, press random digit buttons without limitation and then input the password,
and the password will be concealed.
▣
Lock Error Check
When the door is not closed normally, the machine will try to lock three times and then
"Beep" sound will occur to inform you of an error.
※The bolt err in the external alarm lamp lights on.
▣
Burglar and Malicious Action Alarm Function (Warning Function)
When the door is forcedly opened from the outdoor, the emergency alarm sound will occur
for 1 minute and inform you of the entrance of outsiders.
※Input the password or the RF card, and the alarm will be released.
▣
Sound Control Function (Iower Sound ↔Higher Sound)
Press "Input button" ▶ "1" and "3" buttons ▶ "✽" button
▶ "1" button several times for lower sound and "3" button several times for higher
sound ▶ "✽" button.
▣
Fire Sensing Function (Built-in Fire Detection Sensor)
When the thermal detection sensor detects heat (60℃±10℃), the door will be automatically opened.
▣
Reset function
Press Reset button using a sharp object such as ballpoint pen, toothpick, etc
※Function to reset program by pressing Reset button in case of temporary error rather
than product malfunction.
▣
External Alarm Lamp
15
Opening the Door with Spare Batteries
16
Product Specification
17
Trouble Diagnosis and Troubleshooting
18
Consumer Damage Compensation Criteria
14
Battery Exchange Method
▣Opening the door using the password from the outdoor
1. Press "Start/ending button" or touch number pad with palm.
2. Enter the input password.
3. Press start/ending or "✽" button, and the door will be opened.
▣
Opening the Door with the Password
Contact 9V battery to the emergency power terminal ▶ Press "✽" button and then the password
▶ Press "✽" button again, and the door will be opened.
▣
Opening the door with the Card/Tag
(Card/Tag applied model)
Contact a 9V battery to the emergency power terminal and then contact the Card/Tag to input part, and the door will
be opened.
▣Opening the door using the Card/Tag from the outdoor (Card/Tag applied model)
▣Opening the door from the indoor
If the built-in battery voltage gets downed, the lamp blinks before 7days and a saved melody rings.
You should replace all of them by new spares. The password or Card/Tag registered are not changed in spite of the
exchange of batteries.
When batteries are completely discharged due to long-time going out or traveling,
you can open the door with safety using the emergency power terminal.
Purchase a DC 9V rectangular alkaline battery in the market, contact it to the
emergency power terminal in the outdoor body and use the password or the Card/Tag
to open the door.
- If new batteries are used together with used ones, their life cannot be guaranteed and the machine
may not work normally.
- If rechargeable batteries are used, the machine may not work normally.
Check battery polarity (+/-) before insertion. Abnormal insertion results in error-working.
- If any defect occurs due to the use of bad batteries, it is attributable to the customer.
Use genuine alkaline batteries only.
Never fail to use this function on condition that the battery contacts to the
emergency power terminal. (Regardless of the polarity(+/-))
- In case five times errors of the password, the machine does not work for 1 minute.
- When the machine has not worked, you should use it in one minute.
Press "Open/Close button" to open the door.
Contact the registered Card/Tag to the Card/Tag input part in the outdoor body.
“ding-dong-dang” sound will occur and the door will be opened.
The manual operating device should be used for fire or emergencies only.
9
Door Closing
11
Dual Lock Function
13
Other useful functions
12
Auto/Manual Lock Setting
10
Use Remote Controller
(Applied Model)
▣Closing the door from the outdoor
- Auto mode : Close the door, and it will be automatically locked in one second.
- Manual mode : Press "Start/ending" button.
▣Closing the door from the indoor
- Auto mode : Close the door, and it will be automatically locked in one second.
- Manual mode : Press "Open/Close button" to lock the door.
※The manual operating device should be used for fire or emergencies only.
▣External dual lock (burglar prevention through a slot)
When the external dual lock is set, the door does not open in spite of pressing
"Open/Close button" from the indoor.
✽Setting: Press "Start/ending button" for 5 seconds long.
("Ding-dong-dang" sound occurs.)
✽Cancellation: Enter password to cancel external dual lock.
▣Easy function to lock the door automatically in one second after closing it.
- Auto mode : Press "Input button" once▶"#" button ▶"Input button" once ("ding-dong-dang" sound)
- Manual mode : Press "Input button" once▶"#" button▶"Input button" once ("beep" sound)
▣Auto lock time is changeable up to 2 to 9 seconds.
- Press "Input Button" ▶ "8" button ▶ desired times ("2"~"9" buttons) ▶ "✽" button.
▣Register/delete remote controller
- Registration:
Press indoor Input button one time ▶ Press "Open/Close button" on remote controller ("Ding-dong-dang" sound)
▶ Press "✽" button to register (Registered within 8 seconds)
- Delete: Press indoor "Input button" one time ▶ Press "5" button on external keypad twice
▶ Press "✽" button to delete
※Up to 15 remote controllers can be registered.
▣Open/close door
Door will open or close 2~3 seconds after pressing "Open/Close button".
※Frequency: FM 447.275 Mhz ※Battery: CR2032 X 1EA
- When "Pin Error" of the external alarm lamp lights on, it indicates an error
of input password. You should input the correct password again.
- When "ow Battery" of the external alarm lamp lights on, it indicates that
the power of batteries mounted in the indoor body is low.
Immediately, you should replace all of them by new spares (4 batteries).
- When "Double Lock" of the external alarm lamp lights on, the door does
not open in spite of inputting the password.
(when the internal dual locker function is set)
- When "Bolt Errar" of the external alarm lamp lights on, it indicates that
the dead bolt (keeper) in the indoor body is entangled in the front and
Close/Open function does not work normally.
Symptom Troubleshooting
The password is not
memorized.
- Use the Card/Tag to open the door, and input the new password.
- If the Card/Tag is not input or lost, contact A/S center.
Card/Tag is not registered. - Use the password to open the door. When the password is not memorized, contact A/S center.
There are 5 times errors of
the password.
- In case of 5 times errors, all operations are stopped for about 1 minute.
Wait during the given time and then input the password or the touch key again from first.
The door is not automatically
locked. - Check that the auto lock function is set to Auto mode.
When pressing "✽" button,
the machine does not work.
- If other functions do not work as well, check that batteries are normally inserted.
If the batteries are used up, replace them by new spares.
External button tone and
the lamp do not work.
- Check that there is any fluid leakage in the battery case or the machine.
If it is so, clean up contact portions with a dry cloth.
Customer Damage Type Compensation Scope
Within Warranty Period After Warranty Period
When the machine
is normally used
When any trouble occurs within one year after installation. Free repair Charged repair
When the same defect occurs more than two times. Free repair Charged repair
When there is no part for repairing. Exchange of product Exchange of product
(Based on fixed depreciation rate)
When there is
any intension or
mistake of the
consumer
When our engineer is dispatched because of the user’s
mistakes such as wrong exchange of batteries,
inappropriate input method and so on.
Charged repair Charged repair
When consumables like batteries are exchanged. Charged repair Charged repair
When there is any trouble or damage due to use except
the original purpose of the product. Charged repair Charged repair
When there is any trouble or damage by intension. Charged repair Charged repair
hen there is any trouble or damage due to a fire and natural disasters. Charged repair Charged repair
▣
Free-of-charge / Charged Repair (based on details)
The service charge is imposed to the actual expense based on the Consumer Protection Act enacted by the government.(As specified in Article 5 of Consumer Damage Compensation Criteria of the Consumer
Protection Act) The service charge is composed of parts expense, dispatch expense, repair expense. They are concluded as follows. Service charge = parts expense + dispatch expense + repair expense (the
number of repair items)
■
Free service: The product is damaged on the function or working within warranty period in normal operation.
■
Paid service: Over the warranty period or the cases as listed below.
Wrong use / Trip for asking how to use the products / Missing the access-code(Key) / Checking the normal products / Damage when the user install the product / Damage by an impact / Damage for using the
wrong battery / Cover damaged while changing the battery / Damage by chemical / Reinstallation by wrong installation(Adjustment of front position) / Damage by not carrying the emergency key(Emergency
key-applied moddel)
■
Parts Expense: When the product is repaired, the parts may be replaced by a spare. The parts expense means the price of the spare (including 10% VAT).
■
Dispatch Repair Expense:
This is applied to products to be repaired in a charge, which is the amount added the required dispatch fee to the technical fee according to the difficulty (hour) of
product repair.
The warranty period is one year after purchasing. (Never fail to specify the date of purchase on the product certificate.)
Category Description
Basic information
Access-Code 3 ~ 19 digits
Card/Tag registration number Within 50
Thickness of the door 35 ~ 50mm
Operating temperature -20℃~ 60℃（no dew condensation)
Outdoor body Size 64 (W) X 165 (H) X 18 (D) mm
Indoor body Size 157 (W) X 90 (H) X 37 (D) mm / 163 (W) X 96.4 (H) X 38 (D) mm
Material Outdoor body: AL, ZN, PC, ABS
Indoor body: AL, ZN, ABS / Treat the surface: Triple metallic coating
Power Working power 6V (alkaline battery 1.5V × 4 ea, AA SIZE)
Emergency power 9V rectangular alkaline battery (separately purchased)
Card size 85.6mm(W) x 54mm(H) x 0.8mm(D)
Card frequency 13.561Mhz
Product Name
Serial No.
Date of Purchase
Buy ( . . . ) From 1Year (12Months )
Customer
Name
Address
Agent
(installation
shop)
Name
Tel:
Address
▣
Product Warranty (for customer’s use)
※
When request the repair, necessarily present this product certificate.
TEAMWARE HARDWARE SDN BHD
Lot PT355, Jalan TPP5/1,Tmn Perindustrian Puchong, Sec 5, 47100 Puchong, Selangor D.E. Malaysia
Warranty
1.This product has been manufactured based on the strict quality control and inspection process. 2.If there is any defect in this product, you can receive
an after-sales service free of charge for one year on condition that you have used it normally. If any defect occurs within the warranty period, but it
corresponds to a charged repair condition as specified in this certificate, the service charge (repair expense + parts expense + dispatch expense) will be
imposed. 3.This product certificate is applied in Korea only. 4.When requesting the repair, present this product certificate. 5.This product certificate
is not reissued. Therefore you should keep it with caution. 6.If the product is relocated by a move, both installation expense and dispatch expense will be
charged. 7.Once the product is installed on the door, it cannot be returned or exchanged except failures arising from important defects. (Complies with
the consumer damage compensation criteria)
When Requesting Services
1. Before requesting services, check the usage and troubleshooting as specified in the user manual once again. 2. If there is nevertheless any defect, stop
operating and contact the purchase agent or the main office. ※Repair at your disposal may cause a danger. ※If you contact, inform us of details as
followings: Model name, purchase date, purchase agent / address, name, telephone number, home location(address) / trouble symptom(in detail)
TEAMWARE HARDWARE SDN BHD
Lot PT355, Jalan TPP5/1,Tmn Perindustrian Puchong,
Sec 5, 47100 Puchong, Selangor D.E. Malaysia
www.stguchi.com.my.
“You must be aware of how to operate it in preparation for emergency.”
- Keyless Door Lock .
“Caution: This product is a keyless door lock. When it is out of order,
it may be partially damaged for repair.”
1. Rated voltage : DC 6V
2. Insert batteries into the battery compartment in conformity to polarity. Reverse insertion of batteries
may cause fluid leakage or damage to the machine.3. When the battery is flat, please replace all
batteries to new ones.
3. Replace all of used-up batteries at a time by new spares. Do not use new batteries together with
batteries which are being used or have been completely used.
4. Sensor operation temperature : 60
℃
(±10
℃
)
