Squareled Non-Plus-Ultra Violet User manual

User Manual: Squareled Non-Plus-Ultra Violet

1. Summary

Thank you for purchasing our PS1212. Please read these instructions carefully before begin and ope-

rate the xtures according to these instructions to avoid any possible damages and accidents causes

by misusage

Products introduction: LED PS1212 light uses casting aluminum housing, designed in a fashion of

hydrodynamic form. Appearance shows. It adopts high power 6-in-1 LED, which refers to single LED is

made of R,G,B,A,W,UV 6-IN-1 LED, And long life span, low consumption, good color mixing eect and

high brightness are the most prominent features. Each kind of LED can be independently dimmed.

The built-in program includes dimming, strobe, eotic, gradual change, fading and so on. It uses power

switch, performs low weight and consumption, stable capability and long life. International standard

DMX 512 signal is requested.

Packing list: 1xPS1212, 1x DMX Signal Cable , 1 xWaterproof input power cable, User Manual,

Warranty Card

2. Safety Instruction

Safety Notes

! Enquire the skilled people before any repair;

! Always make sure disconnect from the power source before setting up, serving and moving;.

! Avoid direct eye exposure to the xture when it is on;

Safety instruction

Make sure the power supply voltage are consistent with this lights，Ensure the use of voltage is in

the range of the request technical parameter.

Before the installation, please check the light’s fasteners and mechanical structure have been recei-

ved in good condition and appear no damage.

This light is designed for indoor use; working temperature is lower than 50 degree.

The xtures maybe mounted in any position provided there is adequate room for ventilation. Make

sure there are no inammable and explosive items (ornaments) in 0.5 meters away.

Yellow / green cabling earthling safety; no icker when the xture is working on.

Manual | Non-Plus-Ultra Violet



Manual | Non-Plus-Ultra Violet

3. outside Size Picture



Manual | Non-Plus-Ultra Violet

4. Main Function

»high quality LED: low consumption, brightness, stable capability and long life

»each color of LED with 16666 dimming. RGB can make over 16.7 million colors, addingW can achieve

many eects.

»Liner dimming from 0-100%, strobe, gradual change, jumping change etc eects

»Touch Buttoms,Unusual feeling to you.

»DMX512 Controller: 4 button set DMX ID address with led display

»auto run /sound activated/master slave/interconnected multi-machine control

»using switching power supply to protect the LED to work well

»Built-in temperature control function :The output of LED will be reduced when LED is too hot.

»lens degree: 15º, 25º, 45º optional

»Protection grade: IP65

5. DMX Control Function

DMX Channel (6CH):

channel DMX value Control Function Remarks

1CH 0-255 R 0-100%

2CH 0-255 G 0-100%

3CH 0-255 B 0-100%

4CH 0-255 A 0-100%

5CH 0-255 W 0-100%

6CH 0-255 UV 0-100%

DMX Channel (7CH):

channel DMX value Control Function Remarks

1CH 0-255 R 0-100%

2CH 0-255 G 0-100%

3CH 0-255 B 0-100%

4CH 0-255 A 0-100%

5CH 0-255 W 0-100%

6CH 0-255 UV 0-100%

7CH 0-10 Close Strobe

11-255 Adjust Strobe Speed (1-20Hz)

Manual | Non-Plus-Ultra Violet

DMX Channel (8CH):

channel DMX value Control Function Remarks Priority

1CH 0-255 General dimming

2CH 0-255 R 0-100%

3CH 0-255 G 0-100%

4CH 0-255 B 0-100%

5CH 0-255 A 0-100%

6CH 0-255 W 0-100%

7CH 0-255 UV 0-100%

8CH 0-10 Close Strobe

11-255 Adjust Strobe Speed (1-20Hz)

DMX Channel (8CH):

channel DMX value Control Function Remarks

1CH 0-255 General dimming 0——100%

2CH 0-255 red dimming 0——100%

3CH 0-255 Green dimming 0——100%

4CH 0-255 blue dimming 0——100%

5CH 0-255 Amber dimming 0——100%

6CH 0-255 White dimming 0——100%

7CH 0-255 UV dimming 0——100%

8CH 0-10 Close Strobe

11-255 Adjust Strobe Speed (1-20Hz)

9CH

0-15 Dimming

16-18 R

19-21 G

22-24 B

25-27 A

28-30 W

31-33 UV

34-36 R+G

37-39 R+B

40-42 R+A

43-45 R+W

46-48 R+UV

49-51 G+B

52-54 G+A

55-57 G+W

58-60 G+UV

61-63 B+A

Manual | Non-Plus-Ultra Violet

9CH

64-66 B+W

67-69 B+UV

70-72 A+W

73-75 A+UV

76-78 W+UV

79-81 R+G+B

82-84 R+G+A

85-87 R+G+W

88-90 R+G+UV

91-93 R+B+A

94-96 R+B+W

97-99 R+B+UV

100-102 R+A+W

103-105 R+A+UV

106-108 R+W +UV

109-111 G+B+A

112-114 G+B+W

115-117 G+B+UV

118-120 G+A+W

121-123 G+A+UV

124-126 G+W+UV

127-129 B+A+W

130-132 B+A+UV

133-135 B+W+UV

136-138 A+W+UV

139-141 R+G+B+A

142-144 R+G+B+W

145-147 R+G+B+UV

148-150 R+G+A+W

151-153 R+G+A+UV

154-156 R+G+W+UV

157-159 R+B+A+W

160-162 R+B+A+UV

163-165 R+B+W+UV

166-168 R+A+W+UV

169-171 G+B+A+W

172-174 G+B+A+UV

175-177 G+B+W+UV

178-180 G+A+W+UV

181-183 B+A+W+UV

184-186 R+G+B+A+W

187-189 R+G+B+A+UV

190-192 R+G+B+W+UV

193-195 R+G+A+W+UV

196-198 R+B+A+W+UV

199-201 G+B+A+W+UV

202-204 R+G+B+A+W+UV

205-255 auto -run eect(the more value,the faser

speed)

10CH

0-15 Invalid

16-255 Multi-colors jumping change(the more

value,the faser speed)

11CH

0-5

Set by LCD display

DIMMER0-4

6-55 DIMMER0

56-105 DIMMER1

106-155 DIMMER2

156-205 DIMMER3

206-255 DIMMER4

6. Display Operation

»MENU : access the menu or return to a previous menu option

»ENTER: select the current menu option

»UP: menu selection or parameter increments

»DOWN: menu selection or parameters decrease

Manual | Non-Plus-Ultra Violet



Manual | Non-Plus-Ultra Violet

7. Menu Instruction

1. Operating instruction:

MENU (UP/DOWN)+ENTER+(UP/DOWN)+ENTER

Remark: Exp: Select the DMX mode, Here are the operation details:

»Press the MENU, go back to the initial setting

»Press UP/DOWN, display“Addr”

»Press ENTER to change the content, the display will glinting at this moment

»Press UP/DOWN to change the address code to select A001

»Press ENTER to select and store the current menu options. DMX mode will be stored automatically and

the screen will stop glinting.

»Exp: Select DMX Channels optional mode, the operation is as below:

»Press MENU: go back to the initial setting

»Press UP/DOWN: display ”CHnd”

»Press ENTER to change the content, the display will glinting at this moment

»Press UP/DOWN to select the DMX channels that you need, 5CH, 6CH, 9CH and so on

»Press ENTER to select and store the current menu options. DMX mode will be stored automatically and

the screen will stop glinting.

Exp: Close the display, the operation is as below:

»Press MENU: go back to the initial setting

»Press UP/DOWN: display“LED”

»Press ENTER to change the content, the display will glinting at this moment

»Press UP/DOWN to select“OFF”

»Press ENTER to conrm, the select the working mode that you need.When stop pressing, the display will

shut after a while.When the display is closed, press any button to activate the display. If setting the led to

“o”, when stop pressing, the display will shut after a while.

2. Details of program built inside (Pr- -)

Press MENU, go back to the initial setting

»Press UP / DOWN until Pr--

»Press ENTER to choose, the display will glinting at this moment

»Press UP / DOWN to change the address code to select pr00

»Press ENTER to select and store the current menu options. DMX mode will be stored automatically and

the screen will stop glinting.

»Remark: Pr00--- Pr62 R,G,B.W single color or multi-colors lighting

»Pr63: Multi colors jumping.

»Pr63 can modify the content of SP--,modify the jumping speed.SP00 is the fastest, SP15 is the slowest

Manual | Non-Plus-Ultra Violet

8. Operating Control Instruction

Master/Slave:

Master:The master should always work as a master as long as it is not set in a DMX mode whatever

other modes it is. And it send out the signal so that the slave synchronous with it.To avoid the host

signal and DMX512 signals interfere with each other, should cut o the DMX512 signals.The signal

lines are longer than 60 meters (32 lamps) ,should increase a signal amplier.

Slave: the Slave must be set in DMX mode and the address code should be A001, to assure receive the

master’s signals correctly. Only one light can be set as a Master and others are slaves.

10. XLR cable connecting

XLR cable:

The standard way of connecting the XLR is: one end connects to the male plug, and the other end

connects to the female. As bellow: pin 1: ground, pin 2: negative signal, pin 3: positive signal

Noted: In order to avoid failures and interference signal transmission, we connect a resistance120Ω

(1/4W) at the end of the DMX connecting as below:



This manual suits for next models

Table of contents

Other Squareled Light Fixture manuals

Squareled

Squareled Storm 300 RGBW User manual

Squareled

Squareled Froggy User manual

Popular Light Fixture manuals by other brands

Emos

Emos CLASSIC ZY1431T manual

Westinghouse

Westinghouse Outdoor Lighting Fixture owner's manual

Hedler

Hedler C 12 silent Operation manual

Blizzard Lighting

Blizzard Lighting Puck: CSI manual 

Energetic Lighting

Energetic Lighting ELYSL-5004 Series installation instructions

Lightmaxx

Lightmaxx Shaft 5R user manual

Triarch

Triarch 31083 Assembly instructions

Philips

Philips 32614 Series user manual

IKEA

IKEA TIVED Assembly instructions

Lightolier

Lightolier LP200 specification

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH user manual

Martin

Martin MAC 250 Krypton user manual

Cooper Lighting

Cooper Lighting Halo L3232E Specification sheet

Stageline

Stageline ODW-2410RGBW instruction manual

Light Sky

Light Sky Tornado Series user manual

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U specification

Lightolier

Lightolier Lytespan 83ED17S specification

Lightolier

Lightolier Calculite CS8226 specification