Spracht RHL-2010 User manual
Remote Handset Lifter
RHL-2010
For ZUM DECT Headset™ and
ZUM eco-DECT Pro™ Headset
USER GUIDE
For ZUM DECT HEADSET ™ and
ZUM eco-DECT Pro™HEADSET
Remote Handset Lifter
RHL-2010
Handset Lifter for ZūM DECT Headset™ and ZūM eco-DECT Pro ™ User Guide
CONTENTS
Package Contents
Introduction
Technical Specifications
Handset Lifter Design
Safety Precautions
User Guide
Installing the Handset Lifter
Basic Operation
∙Power On/Off
∙Making and Receiving Calls
Troubleshooting
Limited Warranty Policy
1
1
2–3
4 – 5
6 –7
8
8
9 – 11
12–13
Package Contents
➊ Handset Lifter for Headset
➋Integrated Connecter Cable to Base Unit
➌ Optional Microphone for External Ring
Tone Sensor
➍Adhesive strips to connect the Lifter to phone
➎User Guide
➌➊ and ➋
Handset Lifter for ZūM DECT Headset™ and ZūM eco-DECT Pro ™ User Guide
Introduction
Thank you for purchasing Spracht®’s Remote
Handset Lifter for ZūM DECT Headset™ and ZūM
eco-DECT Pro™ Headset. The Remote Handset
Lifter fits on your telephone and is designed for
use with our ZūM DECTHeadset™ or ZūM eco-
DECT Pro™ Headset. It lets you answer and end
calls when you’re away from your desk with the
touch of the ON/OFF button on your Headset. The
Handset Lifter is easy to position and install on
your phone.
Technical Specifications
Headset Operating Time: 7 hours talk time / 120 hours
standby time
AC Adaptor Specs:
• Input Voltage: 100-240V
• Output Voltage: 7.5V DC / 800mA
Telephone Interface: Analog telephone line class TNV3
as defined by EN60950 standard
Rechargeable Battery: 3.7V DC / 320mAh
1
➍
➎
Handset Lifter Design
➊LED
➋ Lifter Arm
➌Lifting Height Adjustment Slide Switch
➍(Underside) Optional Microphone Sensor Jack
➎Optional Microphone Sensor Extension Jack
➏Cord to Connect to Headset Base Unit
➏
➌
➋➊
2
➐
➑
➒
➓
Handset Lifter for ZūM DECT Headset™ and ZūM eco-DECT Pro ™ User Guide
Base Unit Back
➐Power Jack
➑Lifter Jack
➒Phone RJ-11 Jack
➓Handset Jack
3
Safety Precautions
To ensure safe operation of your Handset Lifter,
please follow these guidelines:
• Read this manual thoroughly and follow the
operating instructions and information provided.
• The intended use of this Handset Lifter is to lift
and lower the telephone handset in conjunction
with either the Spracht ZūM DECT Headset™ or
ZūM Pro™ DECT Headset. Do not use it for any
other purpose.
• Modification of the product will void the warranty.
• Do not allow anything other than the telephone
handset to rest on this product or locate it in an
area where normal operation can be hampered.
Additional applied weight will prevent the lifter
from working.
• Do not expose any of the equipment to extreme
temperatures or high relative humidity and protect
it from direct sunlight and dusty conditions.
• Clean the equipment with a soft, damp cloth.
Do not use any solvents or harsh cleansers.
!
4
Handset Lifter for ZūM DECT Headset™ and ZūM eco-DECT Pro ™ User Guide 5
• Connect only approved accessories.
• Never open the unit. Opening the unit voids the
warranty and, more importantly, exposes you to
the risk of an electric shock.
• If your unit needs repair, contact the retailer you
bought it from, or contact Spracht directly.
Approved Accessories
External Sensor
Microphone
Installing the Handset Lifter
You will be placing the Headset Lifter on your
phone so that the Ring Tone Sensor in the Headset
Lifter is positioned over the speaker of your phone.
Please refer to Figure A on the next page. The
exact position of the lifter will vary phone to phone.
You will have to experiment to find the best place
on your phone to physically lift the phone’s handset
in order to take the call on your Headset. You can
adjust the height of the lifter arm by moving the
up/down lever to the best height. The lever can
be adjusted in three (3) steps, from low to high, to
lift the handset, based on the shape and weight
of the handset. You can test the lifter’s position
by pressing the talk button on your Headset: you
should be able to hear a dial tone if the handset is
raised to the correct height.
Once you have found the best location, you’ll have
to attach the lifter to your phone with the provided
adhesive strips.
If the Handset Lifter is not directly over the
speaker of your phone you may have to plug in
the optionalextra microphone, provided. If it is
needed, plug it into the jack on the lifter and place
6
Table of contents
