Spokey GRADIOR User manual

www.spokey.eu

Magnetic exercise bike

Rower magnetyczny

Magnetický rotoped

Magnetisches Heimtrainer

Magnetický bicykel

Magneettinen kiinteä

kuntopyörämag

GRADIOR

928656

Μαγνητικο στατικο ποδηλατο

Magnetni stacionarni bicikl

Magnetinis dviratis

Magnētisks velotrenažieris

Bicicleta estacionária magnética

Магнетический велотренажер

2 |

| 3

4 |

| 5PL | instrukcja obsługi

6 |

| 7

8 | EN | instruction

2. HARDWARE TOOLS FOR INSTALLATION

(see g A):

3. ASSEMBLING INSTRUCTIONS

STEP 1 (see g B):

• Attach the front stabilizer(3) and the rear

stabilizer(2) to the main frame(1) with

Screw(54) and at washer (55). The front

stabilizer(3) is with transport wheel, which it

is easier for you to move this equipment. And

the rear stabilizer has no wheel.

• Attach the pedal (11L/R) to the crank (69L/R)

with the spanner tool tightly. Be sure the ri-

ght pedal(11R) marked (R) is attached to the

right crank tightly in the clockwise direction.

The left pedal(11L) marked(L) is attached

to the left crank tightly in the anticlockwise

direction.

STEP 2 (see g C):

• Attach the saddle(5) to the saddle sliding

group set (56) with at washer(64) and nylon

nut(60), then tighten saddle(5).

• Slide the saddle and bracket into the vertical

saddle support post(4) and at the desired

position, align holes and x in place with the

knob(61) and at washer(59)

• Insert the saddle support post(4) into themain

EN USE’S MANUAL

1. IMPORTANT

SAFETY INFORMATION

1. Be aware of your body’s signals. Incorrect or

excessive exercise can damage your health.

If you do experience any of these conditions

you should consult your doctor before con-

tinuing with your exercise program.

2. Keep children and pets away from the

equipment. The equipment is designed for

adult use only.

3. Use the equipment on a solid, at level

surface with a protective cover for our oor

or carpet. For safety, the equipment should

have at least 0.5 meter of free space all

around it.

4. Before using the equipment, check the nuts

and bolts are securely tightened. Some

parts like pedals, etc. It’s easy to be ware

away.

5. Always use the equipment as indicated.

Ifyou nd any defective components whilst

assembling or checking the equipment, orif

you hear any unusual noise coming from

the equipment during use, stop. Do not use

the equipment until the problem has been

rectied.

6. Wear suitable clothing whilst using the

equipment. Avoid wearing loose clothing

which may get caught in the equipment

or that may restrict or prevent move-

ment.

7. Theequipment hasbeen tested andcertied

to EN957 under class H.C. Suitable for

domestic, home use only. Maxi-

mum user weight 120kg.

8. The equipment is not suitable for therapeu-

tic use.

Thank you for purchasing the Magnetic Bike. Before operating this unit, please read this

manual carefully to ensure optimum performance and safety.

| 9EN | instructioni

4. CONSOLE INSTRUCTION

KEY FUNCTIONS:

• MODE: This key lets you to select and lock on

to a particular function you want.

• SET: Can to proceed the data establish for

“TIME”“DISTANCE”“CALORIES”“PULSE”.

• CLEAR(RESET): The key to reset the value to

zero by pressing the key.

• ON/OFF(START/STOP):

The key to pause the signal input by pressing

the key.

STEP 3 (see g D):

• Put the front post (7) into the front post deco-

rative cover (28) rst.

• Connect the console wire(14) and spead

senor wire(16) together. At the same time,

connect the resistance adjusting wire(17&18)

together, too. Please ensure that all the pins

are straight when connecting 14&16 and

17&18. Failure to do so will result in console

malfunction.

• Attach the front post(7) to the main frame (1)

with Screw(63), at washer(55) and curved

washer(66).

STEP 4 (see g E):

• Install the console(9) on the front post(7)

with the screws(68).

• Take out the protective plug(67), put the pul-

se sensor wires(19) on the handle bar(8) into

the hole that on the front post (7) and pull it

out. After that, put the protective plug(67)

back into the hole .Fix the handle bar(8) on

the handle bar xing socket with theT-Shape

knob (51) and decorative part (52) properly.

Be careful not to snag the pulse sensor wire

connected to the handle bar as it will aect

the heart rate measurement.

• Connect hand pulse sensor wires(19) and

main console wires(14) rmly, ensuring a

good connection. Push all excess wires back

frame(1) with the saddle post decorative co-

ver(6) and line up the holes. Secure the saddle

in position with the adjusting knob (10). The

correct height for the saddle can be adjusted

after the bike is fully assembled.

Note:

Do not exceed the mark”stop”.

down the stem until the console sits on the

bracket.

• When connecting the console to the bracket,

please note that all the xings are already

preassembled to the back of the console.

Caution:

Now the equipment is completed assembled,

if you nd it not leveled on the oor, you can

adjust it by the adjusting rear stabilizer tube

plug(13). Make sure you have tightened all

the screws and nuts well before beginning

your workout.

10 | EN | instruction

FUNCTIONS:

• TIME: Press the MODE key until pointer lock

on to TIME. The total working time will be

shown when starting exercise.

• SPEED: Press the MODE key until the pointer

advance to SPEED. The current speed will be

shown.

• DISTANCE: Press the MODE key until the

pointer advance to DISTANCE.The distance of

each workout will be displayed.

• CALORIE: Press the MODE key until pointer

lock on to CALORIE. The calorie burned will be

displayed when starting exercise

• ODOMETER (IF HAVE): Press the MODE key

until the pointer advance to ODOMETER.

The total accumulated distance will be

shown..

• PULSE (IF HAVE): Press the MODE key until

the pointer advance to PULSE .User’s current

heart rate will be displayed in beats per mi-

nute. Place the palms of your hands on both

• When you don’t use the exercise bike for a

long time, please take out the console battery

to avoid running out of battery.

• Often clean the exercise bike with clean cloth

to keep the clean appearance..

• Regularly check that the elements fastened

with nuts and bolts are correctly tightened.

• Remember regularly to grease moving parts.

• Storing the equipment in a clean and dry

environment away from children.

of the contact pads(or put ear-clip to ear),and

wait for 30 seconds for the most accurate

reading.

• SCAN: Automatically display changes every

4 seconds.

• BATTERY If improper display on monitor,

please reinstall the batteries to have a good

result.

5. PRODUCT MAINTENANCE:

OPERATION PROCEDURES:

• AUTO ON/OFF

The system turns on when any key is pressed

or when it sensor an input from the speed

sensor.

The system turns o automatically when the

speed has no signal input or no key are pres-

sed for approximately 4 minutes.

• RESET

The unit can be reset by either changing bat-

tery or pressing the MODE key for 3 seconds.

• MODE

Tochoose the SCAN orLOCKif youdo not want

the scan mode, press theMODE key when the

pointer on the function you want which be-

gins blinking.

This manual suits for next models

Table of contents

Languages:

Popular Exercise Bike manuals by other brands

Weslo

Weslo Vector 302 Bedienungsanleitung

TOORX

TOORX BRX85 Instruction

Matrix

Matrix KranKcycle user manual

Matrix

Matrix IC3 manual

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 user manual

Monark

Monark 827E instruction manual

Stamina

Stamina 1310 owner's manual

American Fitness

American Fitness SPR-BK1072A owner's manual

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Service manual

BH FITNESS

BH FITNESS H9158H Instructions for assembly and use

Body Sculpture

Body Sculpture BC-7220G manual

Cateye

Cateye EC-2300 manual

FYTTER

FYTTER RACER RC MSR user manual

Kikos

Kikos HM-9090M user manual

Pro-Form

Pro-Form 345 Zlx Bike Manual Del Usuario

Fuel Fitness

Fuel Fitness SU135-40 owner's manual

NordicTrack

NordicTrack Gxr 4.2 Bike Manuel de l'utilisateur

Vision Fitness

Vision Fitness U70 Service manual