Spectrum Digital TMS320C5515 eZdsp User manual

512846-0001 Rev A

TMS320C5515 eZdsp Stick Quick Start Guide

1.0 SYSTEM REQUIREMENTS

To operate the Spectrum DigitalXDS100 JTAG Emulatorwith your system it needs to meet

the following requirements:

• 2 GB of free hard disk space

• Microsoft WindowsTM XP/Vista

• Min 1 GB ram, 2 GB recommended

• Min 1.5 GHz., dual core recommended

• Color Display

• Internet access

• USB port

• DVD reader

2.0 WHAT’S INCLUDED

The TMS320C5515 eZdsp USB Stick kit includes:

• TMS320C5515 eZdsp USB Stick

• USB extension cable

• TMS320C5515 eZdsp USB Stick DVD with Code Composer Studio (CCS)

• This Quick Start Guide

C5515 eZdsp USB Stick DVD Quick Start Guide

USB Cable

512846-0001 Rev A

3.0 C5515 eZdsp USB Stick Installation

Note: Install ALL software prior to connecting the C5515 eZdsp USB Stick to the

computer !

Note: The user MUST be logged onto windows with “Administrative Rights” and any

anti-virus software must be disabled during installations. Please contact your

system administrator if help is needed in this area.

1. Insert the Code Composer Studio (CCS) v4 DVD into the computer’s DVD drive and

wait for the auto-run application to start. The user prompts will step the user through

the rest of the CCS installation. The installation will place a CCS icon on your desktop.

2. At this time plug the C5515 eZdsp USB Stick into a USB port (directly or via the USB

extension cable) on your laptop or PC. Windows will recognize the new hardware

connection and complete the hardware installation automatically.

3. Launch CCS v4 from the shortcut icon on the desktop.

4. A prompt will appear asking for a workspace location. Each time CCS starts up the

main workspace is the main working folder for CCS. The default location will be

(on Windows XP) “C:\Documents and Settings\<user name>\My

Documents\workspace”. To have CCS automatically default to the specified

workspace location, select the “Use this as the default and do not ask again” option.

5. Create a user license. After launching CCS, the user may be prompted to create a

user license to activate theCCS software. Select the “Activate a License” option. Then

click “Use Free Limited License”. This will re-direct you to the Texas Instruments

website to complete the License creation process. Alternatively, the “Activate a

License” step may be bypassed temporarily and completed at a later date by clicking

“Evaluate Code Composer Studio for 30 days”.

512846-0001 Rev A

4.0 CCS Configuration Instructions

1. Launch CCS v4 from the shortcut on the desktop. (This was created when CCS v4

was installed).

2. The CCS v4 window will appear. Click the “Target” menu, then select “New Target

Configuration File”.

3. The “New Target Configuration” window will appear. Enter a file name that describes

the emulator connection and/or Texas Instruments device being used and click

“Finish”. For example: “C5515_USBStick”.

4. The “Basic” configuration setup window will open in the CCS v4. Select “Texas

Instruments XDS100 USB Emulator” from the “Connection” menu. Type “5515” in the

“Device” field and select “USBSTK5515”, from the list.

License Screen

512846-0001 Rev A

5. Click the “Save” button to save the configuration.

6. Click the “View” menu and select “Target Configurations” to expose the

configuration(s) that have been built or imported. A new tab labeled “Target

Configurations” will become available in the CCS window.

7. Expand the “User Defined” folder. Right-click on the new configuration that has been

created and click “Launch Selected Configuration”.

8. Click “View->Debug” then click “Target->Connect Target”. CCS will attempt to connect

to the C5515 eZdsp USB Stick and run the GEL file. Once the connection is

successful and the GEL file has finished, the console window will print a message

stating “Target Connection Complete”.

Configuration Screen

512846-0001 Rev A

5.0 Running the C5515 eZdsp USB Stick LED Blink Demonstration

1. The C5515 eZdsp USB Stick must be connected in CCS before proceeding. If the

board is not connected, please refer to section 4.0 of this guide.

2. Click “File->Import”.

3. When the new window appears, expand “CCS” and select “Existing CCS/CCE

Eclipse Project”. Click “Next”.

4. Select “Select Root Directory” andclick the “Browse”button. Browseto directory path

“<Install_Dir>\ccsv4\emulation\boards\usbstk5515_v1\tests\led”.

The default <Install_Dir> is “C:\programfiles\Texas Instruments”

5. Highlight the “LED” folder and click “OK”. Then click “finish”

6. Click “View->C/C++Projects”. A new tab will appear in the CCS v4 window and there

should be a LED project visible.

7. Click “Project->Build Active Project”.

8. When the build is complete, a message will print in the Console Window.

9. Look in the “C\C++Projects” tab again and expand the “binaries” folder. There now

should be a “led.out” file listed.

10. Right click on “led.out” and click “Load Program”.

11. Click “Target->Run”. The C5515 eZdsp USB Stick “XF” LED should now blink.

6.0 SUPPORT RESOURCES

1. For additional information regarding the TMS320C5515 family of DSPs please refer

to the following page on the TI web site:

http://tiexpressdsp.com/index.php/C5000

2. If you have problems or need additional information regarding the embedded

emulation please refer to the XDS100 USB wiki on the TI web site. The URL for this

site is: http://tiexpressdsp.com/index.php?title=XDS100

3. Code Composer Studio support is available via a forum at:

http://community.ti.com/forums/138.aspx

4. More information about other Spectrum Digital emulators can be found at:

www.spectrumdigital.com

5. Additional development support is available via the online community:

www.ti.com/ezdsp5000

512846-0001 Rev A

EVALUATION BOARD/KIT IMPORTANT NOTICE

Spectrum Digital, Inc. (SDI) provides the enclosed product(s) under the following conditions:

This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT,

DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by SDI to be a

finished end-product fit for general consumer use. Persons handling the product(s) must have

electronics training and observe good engineering practice standards. As such, the goods being

provided are not intended to be complete in terms of required design-, marketing-, and/or

manufacturing-related protective considerations, including product safety and environmental

measures typically found in end products that incorporate such semiconductor components or

circuit boards. This evaluation board/kit does not fall within the scope of the European Union

directives regarding electromagnetic compatibility, restricted substances (RoHS), recycling

(WEEE), FCC, CE or UL, and therefore may not meet the technical requirements of these

directives or other related directives.

Should this evaluation board/kit not meet the specifications indicated in the User’s Guide, the

board/kit may be returned within 30 days from the date of delivery for a full refund. THE

FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY SELLER TO BUYER

AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY,

INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR

PURPOSE.

The user assumes all responsibility and liability for proper and safe handling of the goods.

Further, the user indemnifies SDI from all claims arising from the handling or use of the goods.

Due to the open construction of the product, it is the user’s responsibility to take any and all

appropriate precautions with regard to electrostatic discharge.

EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY

SHALL BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES.

SDI currently deals with a variety of customers for products, and therefore our arrangement with

the user is not exclusive.

512846-0001 Rev A

SDI assumes no liability for applications assistance, customer product design, software

performance, or infringement of patents or services described herein.

Please read the User’s Guide and, specifically, the Warnings and Restrictions notice in the

User’s Guide prior to handling the product. This notice contains important safety information

about temperatures and voltages. For additional information on SDI’s environmental and/or

safety programs, please contact the SDI application engineer or visit www.spectrumdigital.com.

No license is granted under any patent right or other intellectual property right of SDI covering or

relating to any machine, process, or combination in which such SDI products or services might be

or are used.

Mailing Address: Spectrum Digital, Inc.

P.O. Box 1559

Sugar Land, TX. 77487-1559

“eZdsp” is a trademark of Spectrum Digital, Inc.

FCC Warning

This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT,

DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by SDI to be a

finished end-product fit for general consumer use. It generates, uses, and can radiate radio

frequency energy and has not been tested for compliance with the limits of computing devices

pursuant to part 15 of FCC rules, which are designed to provide reasonable protection against

radio frequency interference. Operation of this equipment in other environments may cause

interference with radio communications, in which case the user at his own expense will be

required to take whatever measures may be required to correct this interference.

512846-0001 Rev A

SPECTRUM DIGITAL, INC

12502 Exchange Dr., Suite 440, Stafford, TX. 77477

T: 281.494.4505 F: 281.494.5310

e-mail: sales@spectrumdigital.com website: www.spectrumdigital.com

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Spectrum Digital:

702359

Other manuals for TMS320C5515 eZdsp

Table of contents

Popular Modem manuals by other brands

Davicom

Davicom DM562AP Operation manual

EpiValley

EpiValley TATA indicom SXC-1080 user guide

Zte

Zte WiMAX user manual

Intelimax

Intelimax MA-2060 user manual

SMC Networks

SMC Networks D3CM1604V Administrator's manual

Telstra

Telstra Wi-Fi 4G Advanced Pro X user guide

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 user manual

Samsung

Samsung AceLink SAM-335A user guide

Enfora

Enfora Enabler-G Integration guide

iRZ

iRZ ATM2-232 user guide

Zhone

Zhone 6310 installation instructions

Paradyne

Paradyne Hotwire 7976 installation instructions

US Robotics

US Robotics 3453C datasheet

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... user manual

Zte

Zte MF823 user guide

Four-Faith

Four-Faith F1403 user manual

Sierra Wireless

Sierra Wireless AIRLINK MP595W user guide

Gemtek

Gemtek WiMAX WIXFBR-103 user manual