Sony IJ1001SNBT User manual
Energy Storage System “IJ1001SNBT”
38
Open the energy storage server using screw driver and install the lithium ion battery module
Fixing the top cover.
Copyright Sony Energy Devices Corporation
Insert the antenna cable Top cover
Front
Energy Storage System “IJ1001SNBT”
39
Open the energy storage server using screw driver and install the lithium ion battery module
Fixing the top cover.
Copyright Sony Energy Devices Corporation
Screw：⑥Screw（M4×10㎜Black）×4pcs
Rear
Energy Storage System “IJ1001SNBT”
40
Set the outer enclosure to the wall
Make a hole for conduit inside the bellow area.
Copyright Sony Energy Devices Corporation
177.8㎜(7in)25.4㎜(1in)
25.4㎜(1in) 304.8㎜(12in)
Hole(1.06in)
Energy Storage System “IJ1001SNBT”
41
Set the outer enclosure to the wall
Fixing the outer enclosure to the wall 4 bolts.
Copyright Sony Energy Devices Corporation
Ground
Keep the distance 30cm or more
From the ground
Bolt :
For Wood Wall Diameter 3/8 inch
Length : 3-1/4 inch
For Concrete Diameter 3/8 inch
Length 3 inch
Energy Storage System “IJ1001SNBT”
42
Install the energy storage box into the outer enclosure
Install the energy storage server to the outer enclosure.
Copyright Sony Energy Devices Corporation
Install
Energy Storage System “IJ1001SNBT”
43
Install the energy storage box into the outer enclosure
Wiring 8 position bellow.
Copyright Sony Energy Devices Corporation
Completed photo
Energy Storage System “IJ1001SNBT”
44
Install the energy storage box into the outer enclosure
Wiring ground terminal using the grounding cable from outer enclosure to the energy storage server.
Copyright Sony Energy Devices Corporation
Ground terminal
Completed photo
Energy Storage System “IJ1001SNBT”
45
Install the energy storage box into the outer enclosure
Check the circuit protector.
Copyright Sony Energy Devices Corporation
Confirm the circuit protector is off
OFF
OFF
Energy Storage System “IJ1001SNBT”
46
Install the energy storage box into the outer enclosure
Insert the fuse bar.
Copyright Sony Energy Devices Corporation
Fuse bar
Screw：⑦Screw（M3×8㎜Black）×2pcs
Energy Storage System “IJ1001SNBT”
47
Install the energy storage box into the outer enclosure
Insert the front panel of the server.
Copyright Sony Energy Devices Corporation
Front panel
Other Sony Storage manuals
Sony
Sony VGC-RA710G Guide
Sony
Sony MicroVault USM1GH User manual
Sony
Sony WALKMAN SUP-NWE020 User manual
Sony
Sony SDX-900V Series User manual
Sony
Sony SDX-420C User manual
Sony
Sony USM4GM User manual
Sony
Sony MSH-128 User manual
Sony
Sony SDX-D250V Manual
Sony
Sony AIT-SDX570 Installation instructions
Sony
Sony GY-8240FC User manual
Sony
Sony CRX300A User manual
Sony
Sony 7819900133 User manual
Sony
Sony MSH-128S2 User manual
Sony
Sony SRR1000 User manual
Sony
Sony USM128C User manual
Sony
Sony SDT-7000 Series User manual
Sony
Sony StorStation AITi200-ST User manual
Sony
Sony VGN-CS320J User manual
Sony
Sony CSM100B User manual
Sony
Sony ODS-L10 User manual
