Sony HTX-8500CEK User manual

Sound Bar

HT-X8500

Operating Instructions

2GB

Do not install the Sound Bar in a

confined space, such as a bookcase or

built-in cabinet.

To reduce the risk of fire, do not cover

the ventilation opening of the Sound

Bar with newspapers, tablecloths,

curtains, etc.

Do not expose the Sound Bar to naked

flame sources (for example, lighted

candles).

To reduce the risk of fire or electric

shock, do not expose this Sound Bar to

dripping or splashing, and do not place

objects filled with liquids, such as vases,

on the Sound Bar.

The AC adapter is not disconnected

from the mains as long as it is

connected to the AC outlet, even if the

Sound Bar itself has been turned off.

As the main plug of AC power adapter is

used to disconnect the AC power

adapter from the mains, connect it to an

easily accessible AC outlet. Should you

notice an abnormality in it, disconnect it

from the AC outlet immediately.

CAUTION

Risk of explosion if the battery is

replaced by an incorrect type.

Do not expose batteries or appliances

with battery-installed to excessive heat,

such as sunshine and fire.

Indoor use only.

Recommended cables

Properly shielded and grounded cables

and connectors must be used for

connection to host computers and/or

peripherals.

For the Sound Bar

The nameplate is located on the bottom

of the Sound Bar.

For the AC adapter

Labels for AC adapter Model No. and

Serial No. are located at the bottom of

AC adapter.

For the customers in Europe

Notice for customers: the

following information is only

applicable to equipment sold in

countries applying EU directives.

This product has been manufactured by

or on behalf of Sony Corporation.

EU Importer: Sony Europe Limited.

Inquiries to the EU Importer or related to

product compliance in Europe should

be sent to the manufacturer’s

authorized representative, Sony

Belgium, bijkantoor van Sony Europe

Limited, Da Vincilaan 7-D1, 1935

Zaventem, Belgium.

Hereby, Sony Corporation declares that

this equipment is in compliance with

Directive 2014/53/EU.

The full text of the EU declaration of

conformity is available at the following

internet address: http://

www.compliance.sony.de/

This equipment has been tested and

found to comply with the limits set out

in the EMC regulation using a

connection cable shorter than 3 meters.

WARNING

3GB

Disposal of waste

batteries and

electrical and

electronic

equipment

(applicable in the

European Union

and other countries with separate

collection systems)

This symbol on the product, the battery

or on the packaging indicates that the

product and the battery shall not be

treated as household waste. On certain

batteries this symbol might be used in

combination with a chemical symbol.

The chemical symbol for lead (Pb) is

added if the battery contains more than

0.004% lead. By ensuring that these

products and batteries are disposed of

correctly, you will help to prevent

potentially negative consequences for

the environment and human health

which could be caused by inappropriate

waste handling. The recycling of the

materials will help to conserve natural

resources. In case of products that for

safety, performance or data integrity

reasons require a permanent

connection with an incorporated

battery, this battery should be replaced

by qualified service staff only. To ensure

that the battery and the electrical and

electronic equipment will be treated

properly, hand over these products at

end-of-life to the appropriate collection

point for the recycling of electrical and

electronic equipment. For all other

batteries, please view the section on

how to remove the battery from the

product safely. Hand the battery over to

the appropriate collection point for the

recycling of waste batteries. For more

detailed information about recycling of

this product or battery, please contact

your local Civic Office, your household

waste disposal service or the shop

where you purchased the product or

battery.

4GB

Table of Contents

About These Operating

Instructions ............................. 4

What’s in the Box .......................... 5

What You Can Do with the Sound

Bar ........................................... 6

Guide to Parts and Controls ..........7

Connecting to a TV or AV

Device

Connecting Sony TV with the

BLUETOOTH Function

Wirelessly ............................... 13

Connecting a 4K TV and 4K

Devices ...................................16

Connecting a TV Compatible with

eARC ....................................... 17

Mounting the Sound Bar on

a Wall .....................................18

When the TV Remote Control does

not Work ................................19

Listening to the Sound

Listening to a TV and Other

Devices .................................. 20

Enjoying the Surround Sound ..... 21

Adjusting the Sound ....................23

Listening to Music/Sound

with the BLUETOOTH®

Function

Listening to Music from a Mobile

Device ....................................25

Changing the Settings of the

BLUETOOTH Function ............27

Using the Various Functions

Using the Control for HDMI

Function ................................ 28

Using the “BRAVIA” Sync

Function ................................ 30

Saving Power Consumption ....... 30

Troubleshooting

Troubleshooting ........................... 31

Resetting the Sound Bar ............. 36

Additional Information

Specifications ...............................37

Supported Input Audio

Formats ................................. 38

Supported HDMI Video

Formats ................................. 39

On BLUETOOTH

Communication .....................41

Precautions ................................. 42

About These Operating

Instructions

•The instructions in these Operating

Instructions describe the controls on

the remote control.

•Some illustrations are presented as

conceptual drawings, and may be

different from the actual products.

•The default settings are underlined on

each feature description.

Example: Vertical surround off

Connecting to a

TV or AV Device

with the HDMI

Cable



Startup Guide

(separate

document)

5GB

What’s in the Box

• Sound Bar (1)

• Remote control (1)

• R03 (size AAA) battery (2)

• Optical digital cable (1)

•ACadapter(1)

• AC power cord (mains lead) (1)

–U.K./Irelandmodels

–Othermodels

• WALL MOUNT TEMPLATE (1)

•StartupGuide

• Operating Instructions

6GB

What You Can Do with the Sound Bar

“Listening to a TV and Other

Devices” (page 20)

Blu-ray Disc™ player, cable

box, satellite box, etc.

“Using the Control for HDMI

Function” (page 28)

“Using the “BRAVIA” Sync

Function” (page 30)

“Listening to Music from a

Mobile Device” (page 25)

“Connecting Sony TV

with the BLUETOOTH

Function Wirelessly”

(page 13)

Basic connection: Refer to

“Startup Guide” (separate

document).

Other connections: See

“Connecting to a TV or AV

Device” (page 13).

The Sound Bar supports object-based audio formats such as Dolby Atmos and

DTS:X as well as HDR video formats such as HDR10, HLG, and Dolby Vision.

7GB

Guide to Parts and Controls

Details are omitted from the illustrations.

Front

Remote control sensor

Point the remote control at the

remote control sensor to operate

the Sound Bar.

(power) button

Turns on the Sound Bar or sets it to

standby mode.

(input select) button

(page 20)

BLUETOOTH button (page 25)

+/– (volume) buttons

Sound Bar

8GB

Indicators

A lighting or flashing of the indicators on the Sound Bar indicates the following

state.

Currently selected input

Sound format, surround effect

Volume

Indicators Status

Lights while TV input is selected.

Lights while HDMI input is selected.

Lights while BLUETOOTH input is selected.

Light while the Sound Bar is connected to the TV with the BLUETOOTH

function (TV input is selected).

Indicators/colors Status

White Lights while the Dolby Atmos format is playing and the virtual

surround processing is activated.

White Lights while the DTS:X format is playing.

Green Lights while the DTS format is playing and the sound effect setting is

set to “DTS Virtual:X” (page 22).

Orange Lights while the DTS:X format is playing and the sound effect setting

is set to “DTS Virtual:X” (page 22).

White Lights while the vertical surround function is set to on (page 21).

Indicators Status

Indicate the volume level by the flashing

indicators when adjusting the volume by

pressing +/–.

As the volume level is turned up, the flashing

indicators increase (from left to right).

• Flash repeatedly while the sound is muted.

• Flash twice when the volume level is set to

minimum.

Flash twice when the volume level is set to

maximum.

9GB

Setting value for each function

The changed setting for each function is indicated as the status of the indicators. The

following status indicates the on/off setting for each function.

For the status when the settings other than the on/off setting are changed, see the

description for each function.

Indicators Status

• Flash twice when the function is set to on

(for the function other than the night/voice

mode).

• Light for 2 seconds when the function is set

to on (for the night/voice mode).

• Flash twice when the function is set to off

(for the function other than the night/voice

mode).

• Light for 2 seconds when the function is set

to off (for the night/voice mode).

10GB

Rear

DC IN terminal

TV IN (OPT) jack

HDMI IN jack

Peel the sticker when connecting

the device to the HDMI IN jack.

For specifications and notes on

connections, see “Supported HDMI

Video Formats” (page 39).

HDMI OUT (TV eARC/ARC) jack

Connect a TV that has an HDMI

input jack with an HDMI cable.

The Sound Bar is compatible with

eARC and ARC. ARC is the function

that sends TV sound to an AV device

such as the Sound Bar from the TV’s

HDMI jack. eARC is an extension of

ARC and enables transmission of

the object audio and multi-channel

LPCM content that cannot be

transmitted with ARC. For details of

eARC, see “Connecting a TV

Compatible with eARC” (page 17).

For supported audio formats, see

“Supported Input Audio Formats”

(page 38). For specifications and

notes on connections, see

“Supported HDMI Video Formats”

(page 39).

IR repeater (page 19)

Transmits the remote signal of the

TV remote control to the TV.

This manual suits for next models

Table of contents

Popular Speakers System manuals by other brands

JVC

JVC CA-MXK5R instructions

LG NB4532B owner's manual

JVC

JVC CA-FSH100 instructions

5Core

5Core Pro Series Operation manual

EAW

EAW MQV1394e Specifications

Lynx

Lynx GXR-LA10A user manual

iLive

iLive ITB066B user guide

RDX

RDX QuickStation 4 product manual

Electro-Voice

Electro-Voice S-122 Specifications

Sven

Sven SPS-619 GOLD Operation manual

Pioneer

Pioneer CS-7070 instruction manual

EAW

EAW UB82e Technical specifications

Sondpex

Sondpex Active Speaker System and Digital Music... User manual and installation instructions

JVC

JVC NX-PN7 instructions

Marshall Amplification

Marshall Amplification AR-DM61-BT user manual

Yamaha

Yamaha NX-A01 - Speaker Sys Product bulletin

SE Audiotechnik

SE Audiotechnik I-LINE manual

Gemini

Gemini WRX-843 Series user manual