Sony HT-SF200 User manual

Sound Bar

HT-SF200

Operating Instructions

2GB

Do not install the appliance in a

confined space, such as a bookcase or

built-in cabinet.

To reduce the risk of fire, do not cover

the ventilation opening of the appliance

with newspapers, tablecloths, curtains,

etc.

Do not expose the appliance to naked

flame sources (for example, lighted

candles).

To reduce the risk of fire or electric

shock, do not expose this appliance to

dripping or splashing, and do not place

objects filled with liquids, such as vases,

on the appliance.

The AC adapter is not disconnected

from the mains as long as it is

connected to the AC outlet, even if the

unit itself has been turned off.

As the main plug of AC power adapter is

used to disconnect the AC power

adapter from the mains, connect it to an

easily accessible AC outlet. Should you

notice an abnormality in it, disconnect it

from the AC outlet immediately.

CAUTION

Risk of explosion if the battery is

replaced by an incorrect type.

Do not expose batteries or appliances

with battery-installed to excessive heat,

such as sunshine and fire.

Indoor use only.

Recommended cables

Properly shielded and grounded cables

and connectors must be used for

connection to host computers and/or

peripherals.

For the Bar Speaker

The nameplate is located on the bottom

of the Bar Speaker.

For the AC adapter

Labels for AC adapter Model No. and

Serial No. are located at the bottom of

AC adapter.

For the customers in Europe

Notice for customers: the

following information is only

applicable to equipment sold in

countries applying EU directives.

This product has been manufactured by

or on behalf of Sony Corporation.

EU Importer: Sony Europe Limited.

Inquiries to the EU Importer or related to

product compliance in Europe should

be sent to the manufacturer’s

authorized representative, Sony

Belgium, bijkantoor van Sony Europe

Limited, Da Vincilaan 7-D1, 1935

Zaventem, Belgium.

Hereby, Sony Corporation declares that

this equipment is in compliance with

Directive 2014/53/EU.

The full text of the EU declaration of

conformity is available at the following

internet address: http://

www.compliance.sony.de/

This equipment has been tested and

found to comply with the limits set out

in the EMC regulation using a

connection cable shorter than 3 meters.

WARNING

3GB

Disposal of waste

batteries and

electrical and

electronic

equipment

(applicable in the

European Union

and other countries with separate

collection systems)

This symbol on the product, the battery

or on the packaging indicates that the

product and the battery shall not be

treated as household waste. On certain

batteries this symbol might be used in

combination with a chemical symbol.

The chemical symbol for lead (Pb) is

added if the battery contains more than

0.004% lead. By ensuring that these

products and batteries are disposed of

correctly, you will help to prevent

potentially negative consequences for

the environment and human health

which could be caused by inappropriate

waste handling. The recycling of the

materials will help to conserve natural

resources. In case of products that for

safety, performance or data integrity

reasons require a permanent

connection with an incorporated

battery, this battery should be replaced

by qualified service staff only. To ensure

that the battery and the electrical and

electronic equipment will be treated

properly, hand over these products at

end-of-life to the appropriate collection

point for the recycling of electrical and

electronic equipment. For all other

batteries, please view the section on

how to remove the battery from the

product safely. Hand the battery over to

the appropriate collection point for the

recycling of waste batteries. For more

detailed information about recycling of

this product or battery, please contact

your local Civic Office, your household

waste disposal service or the shop

where you purchased the product or

battery.

4GB

Table of Contents

About These Operating

Instructions ............................. 4

What’s in the Box .......................... 5

What You Can Do with the

System .................................... 6

Guide to Parts and Controls ..........7

Connecting a TV

Connecting Sony TV with the

BLUETOOTH Function

Wirelessly ............................... 13

Mounting the Bar Speaker on a

Wall ........................................ 15

When the TV Remote Control does

not Work ................................ 17

Listening to the Sound

Listening to a TV and Other

Devices ...................................18

Listening to Music on a USB

Device ....................................19

Selecting the Sound Effect

Adjusting the Sound .................... 21

Listening to Music/Sound

with the BLUETOOTH®

Function

Listening to Music from a Mobile

Device ....................................23

Turning the System On by

Operating the BLUETOOTH

Device ....................................25

Turning the BLUETOOTH Function

Off ..........................................25

Using the Various Functions

Using the Control for HDMI

Function ................................ 26

Using the “BRAVIA” Sync

Function .................................27

Notes on HDMI Connections ...... 28

Saving Power Consumption ....... 28

Troubleshooting

Troubleshooting .......................... 29

Resetting the System ...................33

Additional Information

Specifications .............................. 34

Playable Types of Files

(USB Input) ............................ 35

Supported Input Audio Formats

(TV Input) .............................. 35

On BLUETOOTH

Communication .................... 36

Precautions ..................................37

About These Operating

Instructions

•The instructions in these Operating

Instructions describe the controls on

the remote control.

•Some illustrations are presented as

conceptual drawings, and may be

different from the actual products.

•The default settings are underlined on

each feature description.

Connecting a TV

with an HDMI

Cable



Startup Guide

(separate

document)

5GB

What’s in the Box

•BarSpeaker(1)

• Remote control (1)

• R03 (size AAA) battery (2)

• Optical digital cable (1)

•ACadapter(1)

• AC power cord (mains lead) (1)

• Cushion pads for wall mounting (2)

• WALL MOUNT TEMPLATE (1)

•StartupGuide

• Operating Instructions

6GB

What You Can Do with the System

“Listening to a TV and Other

Devices” (page 18) Blu-ray Disc™ player, cable

box, satellite box, etc.

Connecting the TV

(refer to “Startup Guide” (separate

document))

“Using the Control for HDMI

Function” (page 26)

“Using the “BRAVIA” Sync

Function” (page 27)

“Listening to Music

on a USB Device”

(page 19)

“Listening to Music from a

Mobile Device” (page 23)

“Connecting Sony TV

with the BLUETOOTH

Function Wirelessly”

(page 13)

7GB

Guide to Parts and Controls

Details are omitted from the illustrations.

Front

Remote control sensor

Point the remote control at the

remote control sensor to operate

the system.

(power) button

Turns on the system or sets it to

standby mode.

(input select) button

(page 18)

BLUETOOTH button (page 23)

+/– (volume) buttons

Indicators

For details, see “About the

indicators on the Bar Speaker”

(page 8).

Bar Speaker

8GB

About the indicators on the Bar Speaker

Lighting and flashing of the indicator(s) on the Bar Speaker indicate the input or

status of the input device.

The indicators flash when turning on/off the function setting or operating the remote

control.

Indicators Status

• Lights: TV input is selected.

• Lights in blue: BLUETOOTH connection is established (BLUETOOTH input is

selected).

• Flashes quickly in blue (about twice a second): During pairing standby status.

• Flashes slowly in blue (about once a second): BLUETOOTH connection is being

attempted.

• Lights: USB input is selected.

• Flashes twice: The play mode is changed.

• Flashes three times first, then flashes slowly repeatedly: When connecting an

unsupported device.

• Flashes repeatedly: While reading data of the connected USB device.

• Light: The system is connected to the TV with the BLUETOOTH

function (TV input is selected).

Indicators Status

• Flashes twice: One of the following functions is set to on.

–Nightmode(page21)

–Voicemode(page21)

• Flashes once: The audio channel is set to Main (page 22), the sound mode is

selected (page 21), or one of the following functions is set to off.

–Nightmode(page21)

–Voicemode(page21)

• Flashes twice: One of the following functions is set to on.

– Dolby DRC (page 22)

– Control for HDMI (page 26)

– BLUETOOTH standby (page 25)

–BLUETOOTHfunction(page25)

– Auto standby (page 28)

– IR repeater (page 17)

–Autovolume(page22)

– Wall mount mode (page 15)

• Flashes once: The audio channel is set to Sub (page 22) or one of the following

functions is set to off.

– Dolby DRC (page 22)

– Control for HDMI (page 26)

– BLUETOOTH standby (page 25)

–BLUETOOTHfunction(page25)

– Auto standby (page 28)

– IR repeater (page 17)

–Autovolume(page22)

– Wall mount mode (page 15)

9GB

The indicators flash while adjusting the volume level.

Tip

You can turn the indicators off by holding down AUTO SOUND for 5 seconds.

Even if the indicators are turned off by using AUTO SOUND, if you operate the system, the

indicators in relation to the operation light or flash.

• Flash twice: The function that connects to the TV with the

BLUETOOTH function is set to on (page 13).

• Flash once: The function that connects to the TV with the

BLUETOOTH function is set to off (page 13).

• Flash once: The audio channel is set to Main/Sub (page 22).

• Flash quickly (about twice a second): The protection feature is

activated (page 32).

• Flash slowly (about once a second): The system enters standby

mode by the auto standby function (page 28).

Indicators Status

• Flashes once: The volume level is low (1 - 20)./The level of the bass

tone is set to -1 (Light) (page 22).

• Flash once: The volume level is medium (21 - 40)./The level of the

bass tone is set to 0 (Normal) (page 22).

• Flash once: The volume level is high (41 - 49)./The level of the bass

tone is set to +1 (Strong) (page 22).

• Flash repeatedly: The sound is muted.

• Flash twice: The volume level is set to maximum/minimum.

Indicators Status

10GB

Rear

DC IN terminal

HDMI OUT (TV (ARC)) jack

Connect a TV that has an HDMI

input jack with an HDMI cable.

The system is compatible with

Audio Return Channel (ARC). ARC

is the function that sends TV

sound to an AV device such as the

system from the TV’s HDMI jack.

TV IN (OPTICAL) jack

(USB) port (page 19)

IR repeater (page 17)

Transmits the remote signal of

the TV remote control to the TV.

Subwoofer

Table of contents

Popular Speakers System manuals by other brands

JVC

JVC CA-MXK5R instructions

LG NB4532B owner's manual

JVC

JVC CA-FSH100 instructions

5Core

5Core Pro Series Operation manual

EAW

EAW MQV1394e Specifications

Lynx

Lynx GXR-LA10A user manual

iLive

iLive ITB066B user guide

RDX

RDX QuickStation 4 product manual

Electro-Voice

Electro-Voice S-122 Specifications

Sven

Sven SPS-619 GOLD Operation manual

Pioneer

Pioneer CS-7070 instruction manual

EAW

EAW UB82e Technical specifications

Sondpex

Sondpex Active Speaker System and Digital Music... User manual and installation instructions

JVC

JVC NX-PN7 instructions

Marshall Amplification

Marshall Amplification AR-DM61-BT user manual

Yamaha

Yamaha NX-A01 - Speaker Sys Product bulletin

SE Audiotechnik

SE Audiotechnik I-LINE manual

Gemini

Gemini WRX-843 Series user manual