Sony WH-CH510 User manual
Sony Wireless Stereo Headset WH-CH510 Instructions
LOCATION AND FUNCTION OF PARTS
1. Headband
2. (left) mark
3. Left unit
4. Tactile dot
There is a tactile dot on the left unit.
5. Slider
Slide to adjust the length of the headband.
6. (right) mark
7. Right unit
8. + (volume +)/ (next) button
There is a tactile dot on the + button. Use this
dot as a guide when operating the headset.
9. (play/call)/ (power) button
Use to play music, make a call, or turn the
headset on/off.
10. - (volume -)/ (previous) button
11. Indicator (blue/red)
Lights up in red while charging.
Lights up in red or blue to indicate the power
or communication status of the headset.
12. USB Type-C port:
Connect the headset to an AC outlet via a
commercially available USB AC adaptor or to
a computer with the supplied USB Type-C
cable to charge the headset.
13. Microphone: Picks up the sound of your voice
when talking on the phone.
14. Built-in antenna: A Bluetooth antenna is built
into the headset.
TURNING ON THE HEADSET
1. Press and hold the (power) button for about 2 seconds until the indicator (blue)
flashes.
TURNING OFF THE HEADSET
1. Press and hold the (power) button for about 2 seconds until the indicator (blue) turns
off.
PAIRING AND CONNECTING WITH A COMPUTER (MAC)
The operation to register the device that you wish to connect to is called “pairing”. First, pair a device to
use it with the headset for the first time.
Compatible OS (macOS version 10.10 or later)
Before starting the operation, make sure of the following:
• Your computer has a Bluetooth function that supports music playback connections
• The computer is placed within 1 m (3 feet) of the headset.
• The headset is charged sufficiently.
• The operating instructions of the computer is in hand.
• Set the computer speaker to the ON mode.
If the computer speaker is set to the “OFF” mode, no sound is heard from the
headset.
Computer speaker in the ON mode
1. Enter pairing mode on this headset.
Turn on the headset when you pair the headset with a device for the first time after you bought
it). The headset enters pairing mode automatically. In this case, proceed to step 2.
When you pair a second or subsequent device (the headset has pairing information for other
devices), press and hold the (power) button for about 7 seconds.
Check that the indicator (blue) repeatedly flashes twice in a row. You will hear the voice guidance
say, “Bluetooth pairing”.
2. Wake the computer up if the computer is on standby (sleep) or hibernation mode.
3. Register the headset using the computer.
1. Select [ (System
Preferences)] -
[Bluetooth]
2. Select [WH-CH510] from
the Bluetooth screen
and click [Connect].
3. Select [ (System
Preferences)] -
[Bluetooth]
4. Select [WH-CH510] from
the Bluetooth screen
and click [Connect].
The headset and computer are paired and connected with each other. You will hear the voice guidance
say, “Bluetooth connected”.
Other manuals for WH-CH510
3
Table of contents
Other Sony Headset manuals
Sony
Sony WI-1000XM2 User manual
Sony
Sony WH-CH720N User manual
Sony
Sony WH1000XM4/SMIN Reference guide
Sony
Sony WI-SP510 Reference guide
Sony
Sony WH-CH710N User manual
Sony
Sony Xperia Ear Duo Operating instructions
Sony
Sony INZONE H5 User manual
Sony
Sony WH-1000XM2 User manual
Sony
Sony WH-1000XM2 User manual
Sony
Sony MDR-XB950BT User manual
Sony
Sony WH-CH500 User manual
Sony
Sony XBA-3IP User manual
Sony
Sony WH-XB900N Reference guide
Sony
Sony WIC400/L Reference guide
Sony
Sony Float Run Reference guide
Sony
Sony h.ear on 3 Mini Wireless Reference guide
Sony
Sony SBH60 User manual
Sony
Sony MDR-ZX780DC User manual
Sony
Sony CECHYA-0090 User manual
Sony
Sony DR-BTN200 User manual
