Sony DR-BT10CX User manual
Wireless Stereo
Headset
2-698-598-11(2)
Operating Instructions
DR-BT10CX
©2006 Sony Corporation
2
WARNING
To reduce the risk of fire or electric
shock, do not expose this
apparatus to rain or moisture.
To reduce the risk of electrical
shock, do not open the cabinet.
Refer servicing to qualified
personnel only.
Do not install the appliance in a
confined space, such as a bookcase or
built-in cabinet.
To reduce the risk of fire, do not cover the
ventilation of the apparatus with
newspapers, tablecloths, curtains, etc.
And do not place lighted candles on the
apparatus.
To reduce the risk of fire or electric
shock, do not place objects filled with
liquids, such as vases, on the apparatus.
Connect the AC power adaptor to an
easily accessible AC outlet. Should you
notice an abnormality in the AC power
adaptor, disconnect it from the AC outlet
immediately.
Hereby, Sony Corp., declares that this
equipment is in compliance with the
essential requirements and other relevant
provisions of Directive 1999/5/EC.
For details, please access the following
URL:
http://www.compliance.sony.de/
The Bluetooth word mark and logos are
owned by the Bluetooth SIG, Inc. and any
use of such marks by Sony Corporation is
under license.
Other trademarks and trade names are
those of their respective owners.
MPEG Layer-3 audio coding technology
and patents licensed from Fraunhofer IIS
and Thomson.
Disposal of Old
Electrical &
Electronic
Equipment
(Applicable in the
European Union and
other European
countries with
separate collection
systems)
This symbol on the product or on its
packaging indicates that this product shall
not be treated as household waste. Instead
it shall be handed over to the applicable
collection point for the recycling of
electrical and electronic equipment. By
ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the
environment and human health, which
could otherwise be caused by
inappropriate waste handling of this
product. The recycling of materials will
help to conserve natural resources. For
more detailed information about
recycling of this product, please contact
your local Civic Office, your household
waste disposal service or the shop where
you purchased the product.
3
Table Of Contents
Welcome! .......................... 4
3 steps to BLUETOOTH
function ................................. 5
Location and Function of
Parts............................... 6
Charging the unit ............. 7
Pairing ............................... 9
What is pairing? ........................ 9
Procedures of pairing ................ 9
Wearing the headset ...... 11
Indications of
BLUETOOTH function
.. 12
Listening to music ......... 13
Calling ............................. 15
Controlling the BLUETOOTH
mobile phone – HFP, HSP .. 17
Calling while playing
back music .................. 18
Disposing of the unit ..... 19
Precautions .................... 20
What is BLUETOOTH
technology? ................ 22
Troubleshooting ............. 23
Initializing the unit ......... 24
Specifications ................. 25
4
Welcome!
Thank you for purchasing this Sony Wireless Stereo Headset. This unit uses
BLUETOOTHTM wireless technology.
•You can enjoy music from your BLUETOOTH device capable of
transmitting music.
• You can enjoy hands-free talking with your BLUETOOTH mobile phone
inside your bag.
•You can charge the unit using the supplied battery charging stand.
For details on BLUETOOTH technology, see page 22.
Enjoy listening to music
Talking on the phone
5
V
Calling
V
Listening to music
VV
3 steps to BLUETOOTH function
BLUETOOTH
mobile phone,
etc.
Pairing
Wireless Stereo
Headset
BLUETOOTH connection
Operate the BLUETOOTH
device to make BLUETOOTH
connection.
Connection
Listening to music
You can listen to music played on
the BLUETOOTH device.
Music
BLUETOOTH connection
When the unit is turned on, the unit
starts making the BLUETOOTH
connection to the recognized
mobile phone automatically.
Talking on the phone
You can make and receive a call
by operating unit.
Pairing (each device)
First, register (“pair”) a BLUETOOTH device (mobile phone, etc.) and
this unit with each other. Once pairing is established, there is no need for
pairing again.
Voice
Connection
A2DP HFP HSP
cPage 9
cPage 13 cPage 15
cPage 16 - 17cPage 13 - 14
6
Location and Function of Parts
1Multi function button
Controls various call
functions.
2Indicator (red)
Indicates the power status of
the unit.
3Indicator (blue)
Indicates the communication
status of the unit.
4POWER button
5Earpieces
6VOL – button
7VOL + button
8Microphone
9RESET button
0Holding clip
Adjust the holding clip to the
desired angle and clip to your
pocket or collar.
qa Contact point
GETTING STARTED
7
1Connect the supplied
AC power adaptor with
the battery charging
stand.
2Connect the supplied
AC power adaptor to an
AC outlet.
Charging the unit
The unit contains a rechargeable Lithium-Ion battery, which should be
charged before using for the first time.
3Put the unit on the
battery charging stand.
Note
If the holding clip is turned, the unit
cannot be set on the battery charging
stand and charging does not start.
Turn the holding clip back to the
original position before charging.
Rest the unit on the battery
charging stand so that the unit’s
contact point meets the contact
pin on the battery charging
stand, and make sure that the
indicator (red) lights up.
Charging is completed in
about 3 hours* and the
indicator (red) goes off
automatically.
*Time required for empty battery
to recharge.
Tip
When charging the battery, the unit is
turned off automatically.
Continued
Battery charging
stand (supplied)
(Rear)
AC power
adaptor
(supplied)
To an AC
outlet
Battery charging
stand (supplied)
Wireless Stereo
Headset
Contact pin
8
Approx.
usage hours
11 hours
100 hours
Usage hours*
Status
Communication
time (including
music playback
time) (up to)
Standby time
(up to)
*Time stated above may vary, depending
on ambient temperature or conditions of
use.
Checking the remaining
battery
When pressing the POWER button
while the unit is turned on, the
indicator (red) flashes. You can
check the remaining battery by the
number of times the indicator (red)
flashes.
Indicator (red)
3 times
2 times
1 time
Note
You cannot check the remaining battery
immediately after the unit is turned on, or
while pairing.
When the battery is almost empty
The indicator (red) flashes slowly
automatically.
When the battery becomes empty, a beep
sounds and the unit will turn off
automatically.
Caution
If this unit detects a problem while
charging, the indicator (red) may
turn off, although charging is not
complete.
Check for the following causes:
–Ambient temperature exceeds the range
of 0 °C – 40 °C (32 °F – 104 °F).
–There is a problem with the battery.
In this case, charge again within the
above-mentioned temperature range.
If the problem persists, consult your
nearest Sony dealer.
Notes
•If the battery is not used for a long time,
battery may be quickly depleted,
however, after a few recharges, battery
life will improve.
•If the life of the built-in rechargeable
battery drops to half the normal length,
the battery should be replaced. Consult
your nearest Sony dealer for
replacement of the rechargeable battery.
•Avoid exposure to temperature
extremes, direct sunlight, moisture,
sand, dust or mechanical shock. Never
leave in a car parked in the sun.
•Use only the supplied AC power
adaptor. Do not use any other AC
power adaptor.
Status
Full
Mid
Low
(needs to
charge)
9
Pairing
Continued
What is pairing?
BLUETOOTH devices need to be
“paired” with each other
beforehand.
Once BLUETOOTH devices are
paired, there is no need for pairing
again, except in the following cases:
•When pairing information is
deleted after repair, etc.
• When this unit is paired with 9 or
more devices.
This unit can be paired with 8
BLUETOOTH devices; if a new
device is paired after 8 devices
have been paired, the device
whose latest connection time is
the oldest among the 8 paired
devices is replaced by the new
one.
•When recognition of the unit by
the device to be connected is
deleted.
•When this unit is initialized.
All pairing information is deleted.
Procedures of pairing
1Place the connecting
device within 1 m (3 ft)
of this unit.
2Press and hold the
POWER button for 7
seconds or more to
standby for pairing
while the unit is turned
off.
Notes
•After about 3 seconds, power is
turned on and the indicator
(blue) and indicator (red) flash
together twice. Keep the button
pressed without releasing until
both indicators start flashing
together, then release the button.
This unit enters into pairing
mode.
•
If pairing is not established
within about 5 minutes, pairing
mode will be cancelled and this
unit will turn off. In this case,
start over from step 1.
10
3Perform pairing
procedure on the
connecting device to
detect this unit.
The list of detected devices
appears on the display of the
connecting device. This unit is
displayed as “DR-BT10CX.”
Note
If “DR-BT10CX” is not displayed,
repeat from step 1.
4Select “DR-BT10CX” on
the display of the
connecting device.
5If Passcode*input is
required on the display
of a connecting device,
input “0000.”
Pairing is complete when the
indicator (blue) flashes slowly.
The message standing for
“Pairing complete” appears on
the display of some
BLUETOOTH devices.
*Passcode may be called
“Passkey,” “PIN code,” “PIN
number,” or “Password.”
Note
Passcode of this unit is fixed at
“0000.” This unit cannot be paired
with a BLUETOOTH device
whose Passcode is not “0000.”
6Start the BLUETOOTH
connection from the
BLUETOOTH device.
This unit memorizes the
device as the latest connected
device. Some BLUETOOTH
devices may connect with the
unit automatically when
pairing is complete.
When pairing with a
BLUETOOTH device that
cannot display a list of
detected devices or that
has no display
You may pair the device by setting
both this unit and the connecting
device to pairing mode. For details,
refer to the operating instructions
supplied with the connecting device.
Tips
•To pair with other BLUETOOTH
devices, repeat steps 1to 5for each
device.
•To delete all pairing information, see
“Initializing the unit” (page 24).
Other manuals for DR-BT10CX
4
Table of contents
Other Sony Headset manuals
Sony
Sony MDR-1000X User manual
Sony
Sony WI-OE600 Reference guide
Sony
Sony WH-CH710N User manual
Sony
Sony MDR-XB950B1 User manual
Sony
Sony AM-BT01 User manual
Sony
Sony DR-EX300iP User manual
Sony
Sony WH-XB910N User manual
Sony
Sony CUHYA-0080 User manual
Sony
Sony MBH22 User manual
Sony
Sony CECHYA-0090 User manual
Sony
Sony WI-SP510 Reference guide
Sony
Sony WF-1000XM3 User manual
Sony
Sony WF-SP700N User manual
Sony
Sony DR-EX13DPV User manual
Sony
Sony MDR-Z1000 User manual
Sony
Sony SBH70 User manual
Sony
Sony MDR-1ABT User manual
Sony
Sony DRBT140Q - Bluetooth Wireless Stereo Headset User manual
Sony
Sony WF-C700N Reference guide
Sony
Sony SBH56 User manual
