Sony MVS-8000A-C User manual
SWITCHER PROCESSOR PACK
MVS-8000A-C
MVS8000AS-C
INSTALLATION MANUAL
1st Edition (Revised 1)
HK-PSU04
MKS-8160A
MKS-8162A
MKS-8210A
MKS-8440A
MKS-8110M
MKS-8111M
MKS-8161M
MKS-8170M
MKS-8420M
BZS-8250
MVS-8000A
MVS-8000ASF
MULTI FORMAT SWITCHER PROCESSOR
MVS-8000A/8000ASF
!WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.
!WARNUNG
Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.
!AVERTISSEMENT
Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien. Afin
de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les
réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.
Pour toute réparation faire appel à une personne compétente uniquement.
MVS-8000A Serial No. 10001 and Higher
MVS8000ASF Serial No. 10001 and Higher
HK-PSU04 Serial No. 10001 and Higher
MKS-8160A Serial No. 10001 and Higher
MKS-8162A Serial No. 10001 and Higher
MKS-8210A Serial No. 10001 and Higher
MKS-8440A Serial No. 10001 and Higher
MKS-8110M Serial No. 10001 and Higher
MKS-8111M Serial No. 10001 and Higher
MKS-8161M Serial No. 10001 and Higher
MKS-8170M Serial No. 10001 and Higher
MKS-8420M Serial No. 10001 and Higher
BZS-8250
MVS-8000A/8000ASF
Attention-when the product is installed in Rack:
1. Prevention against overloading of branch circuit
When this product is installed in a rack and is
supplied power from an outlet on the rack, please
make sure that the rack does not overload the supply
circuit.
2. Providing protective earth
When this product is installed in a rack and is
supplied power from an outlet on the rack, please
confirm that the outlet is provided with a suitable
protective earth connection.
3. Internal air ambient temperature of the rack
When this product is installed in a rack, please make
sure that the internal air ambient temperature of the
rack is within the specified limit of this product.
4. Prevention against achieving hazardous
condition due to uneven mechanical loading
When this product is installed in a rack, please make
sure that the rack does not achieve hazardous
condition due to uneven mechanical loading.
5. Install the equipment while taking the operating
temperature of the equipment into consideration
For the operating temperature of the equipment, refer
to the specifications of the Operation Manual.
6. When performing the installation, keep the rear of
the unit 10 cm (4 inches) or more away from walls
in order to obtain proper exhaust and radiation of
heat.
When using a LAN cable:
For safety,do not connect to the connector for
peripheral device wiring that might have excessive
voltage.
1 (P)
1
MVS-8000A/8000ASF
Table of Contents
Manual Structure
Purpose of this manual .............................................................................................. 3
Related manuals ......................................................................................................... 3
Contents ..................................................................................................................... 3
1. Installation
1-1. Operating Environment ............................................................................... 1-1
1-2. Power Supply .............................................................................................. 1-1
1-2-1. Power Specifications .................................................................. 1-1
1-2-2. Recommended Power Cord ........................................................ 1-1
1-3. Installation Space (External dimensions) .................................................... 1-2
1-3-1. MVS-8000A ............................................................................... 1-2
1-3-2. MVS-8000ASF .......................................................................... 1-3
1-4. Installing the Options .................................................................................. 1-4
1-4-1. Installing the Plug-in Boards ...................................................... 1-4
1-4-2. Installing the Connector Board .................................................. 1-6
1-4-3. Installing the HK-PSU04 ........................................................... 1-9
1-4-4. Installing the BZS-8250 ............................................................. 1-9
1-5. Rack Mounting .......................................................................................... 1-10
1-6. Matching Connectors ................................................................................ 1-12
1-7. Input/Output Signals of Connectors .......................................................... 1-13
1-8. Checks on Completion of Installation ....................................................... 1-15
1-8-1. Description of On-board Switches and LEDs .......................... 1-15
1-8-2. Checks on the Switch Setting the Number of
Power Supply Units.................................................................. 1-31
1-9. System Connection.................................................................................... 1-32
2. Service Overview
2-1. Troubleshooting .......................................................................................... 2-1
2-2. Periodic Inspection and Maintenance ......................................................... 2-2
2-2-1. Cleaning ..................................................................................... 2-2
2-3. About the Data Backup Capacitor............................................................... 2-3
3
MVS-8000A/8000ASF
Purpose of this manual
This manual is the installation manual of Switcher Processor Pack MVS-8000A-C/
MVS8000AS-C and their optional boards and units.
This manual is intended for use by trained system and service engineers, and
describes the information on installing the MVS-8000A-C/MVS8000AS-C system.
Related manuals
The following manuals are prepared for MVS-8000A-C/MVS8000AS-C and their
optional boards and units.
..
..
.Operation Manual (Supplied with MVS-8000A-C/MVS8000AS-C)
This manual describes the application and operation of MVS-8000A-C/
MVS8000AS-C.
..
..
.System Setup Manual (Available on request)
This manual describes the information that is required to connect the MVS-8xxx/
MVE-8000/DCU-8000/CCP-8000 to the MVS-8000 system, and to start up the
system.
If this manual is required, please contact your local Sony Sales Office/Service
Center.
..
..
.Maintenance Manual (Available on request)
This manual describes the detailed service information.
If this manual is required, please contact your local Sony Sales Office/Service
Center.
..
..
.“Semiconductor Pin Assignments” CD-ROM (Available on request)
This “Semiconductor Pin Assignments” CD-ROM allows you to search for
semiconductors used in B&P Company equipment.
Semiconductors that cannot be searched for on this CD-ROM are listed in the
maintenance manual for the corresponding unit. The maintenance manual contains
a complete list of all semiconductors and their ID Nos., and thus should be used
together with the CD-ROM.
Part number: 9-968-546-XX
Contents
This manual is organized by following sections.
Section 1 Installation
This section describes the operating environment, power supply, installation space,
installation of optional boards and units, rack mounting, connectors, input and
output signals of connectors, checking upon completion of installation, and system
configuration.
Section 2 Service Overview
This section describes the troubleshooting and periodic inspection and maintenance.
Manual Structure
1-1
MVS-8000A/8000ASF
Section 1
Installation
1-1. Operating Environment
Operating guaranteed temperature : +5 dC to +40 dC
Performance guaranteed temperature : +10 dC to +35 dC
Operating humidity : 10 % to 90 %
(relative humidity)
Storage temperature : _20 dC to +60 dC
Mass (when all options are installed) :
MVS-8000A : Approx. 51 kg
MVS-8000ASF : Approx. 28 kg
Prohibited locations for installation
.Areas where the unit will be exposed do direct sunlight
or any other strong lights.
.Dusty areas
.Areas subject to vibration.
.Areas with strong electric or magnetic fields.
.Areas near heat sources.
.Areas subject to electrical noise.
.Areas subject where is subjected to static electricity.
Ventilation
The inside of the MVS-8000A-C/MVS8000AS-C (MVS-
8000A series hereafter) is cooled by a fan (both sides).
The power supply can be damaged if the exhaust vent
(both sides) and air intake (front panel) are blocked or the
fan is stopped.
Therefore, leave a blank space of more than 10 cm in the
front and both sides of the DVS-9000 series).
1-2. Power Supply
1-2-1. Power Specifications
A switching regulator is used for the power supply of this
unit. The voltage within the range of 100 V to 240 V can
be used without changing the supply voltage.
Power requirements : AC 100 to 240 V ±10 %
Power frequency : 50/60 Hz
Current consumption (when all options are installed) :
MVS-8000A : 15 to 6.25 A
MVS-8000ASF : 7.5 to 3.1 A
m
.As the inrush current at turn-on is a maximum 120 A (at
100 V)/150 A (at 230 V), the capacity of the AC power
source must be commensurate with this load.
If the capacity of the AC power is not adequately large,
the AC power source braker will operate or the unit will
abnormally operate.
.The MVS-8000A contains the two power supply units as
the standard configuration. A maximum of four power
supply units may be installed. When starting up the
MVS-8000A, be sure to turn on the power of two or
more power supply units.
.The MVS-8000ASF contains the single power supply
unit as the standard configuration. A maximum of two
power supply units may be installed. When starting up
the MVS-8000ASF, be sure to turn on the power of one
or more power supply units.
1-2-2. Recommended Power Cord
w
.Use the approved Power Cord (3-core mains lead)/
Appliance Connector/Plug with earthing-contacts that
conforms to the safety regulations of each country if
applicable.
.Use the Power Cord (3-core mains lead)/Appliance
Connector/Plug conforming to the proper ratings (Volt-
age, Ampere).
If you have questions on the use of the above Power Cord/
Appliance Connector/Plug, please contact your local Sony
Sales Office/Service Center.
c
.Never use an injured power cord.
.Plugging the power cord in the AC inlet, push as far as it
will go.
For customers in the U.S.A. and Canada
1Power cord, 125 V 10 A (2.4 m) : !1-557-377-11
AC inlet
1
For customers in the all European countries
1Power cord, 250 V 10 A (2.4 m) : !1-782-929-12
1AC inlet
1-2 MVS-8000A/8000ASF
Unit : mm
1-3. Installation Space (External dimensions)
1-3-1. MVS-8000A
375
17.5
7
520
440
465
35
370
144.5 115.5 115.5
61 51
354 (8U)
482
This manual suits for next models
3
Table of contents
Other Sony Computer Hardware manuals
Sony
Sony PCWA-C700 - Wireless Lan Dual Pc Card Datasheet
Sony
Sony SRP-F700 User manual
Sony
Sony HR-MPS User manual
Sony
Sony ESBK-7051 User manual
Sony
Sony SDP-E800 User manual
Sony
Sony BKDS-7200K1 User manual
Sony
Sony IFB-12 User manual
Sony
Sony PCWA-C150S - Wireless Lan Pc Card User manual
Sony
Sony MVS-6530 User manual
Sony
Sony PCWA-C100 User manual
Popular Computer Hardware manuals by other brands
EMC2
EMC2 VNX Series Hardware Information Guide
Panasonic
Panasonic DV0PM20105 Operation manual
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 user manual
Gigabyte
Gigabyte B660M DS3H AX DDR4 user manual
Raidon
Raidon iT2300 Quick installation guide
National Instruments
National Instruments PXI-8186 user manual
