Sony CA-D50 User manual

3-620-533-11(1)

2002 Sony Corporation

CA-D50

Camera Adaptor

Operating Instructions

Before operating the unit, please read this manual thoroughly and

retain it for future reference.

WARNING

To prevent fire or shock

hazard, do not expose the

unit to rain or moisture.

To avoid electrical shock,

do not open the cabinet.

Refer servicing to qualified

personnel only.

For customers in the USA

This equipment has been tested and

found to comply with the limits for a

Class A digital device, pursuant to Part

15 of the FCC Rules. These limits are

designed to provide reasonable

protection against harmful interference

when the equipment is operated in a

commercial environment. This

equipment generates, uses, and can

radiate radio frequency energy and, if

not installed and used in accordance

with the instruction manual, may cause

harmful interference to radio

communications. Operation of this

equipment in a residential area is likely

to cause harmful interference in which

case the user will be required to

correct the interference at his own

expense.

You are cautioned that any changes or

modifications not expressly approved

in this manual could void your authority

to operate this equipment.

The shielded interface cable

recommended in this manual must be

used with this equipment in order to

comply with the limits for a digital

device pursuant to Subpart B of Part

15 of FCC Rules.

For the customers in Europe

This product with the CE marking

complies with the EMC Directive (89/

336/EEC) issued by the Commission

of the European Community.

Compliance with these directive

implies conformity to the following

European standards:

•EN55103-1: Electromagnetic

Interference (Emission)

•EN55103-2: Electromagnetic

Susceptibility (Immunity)

This product is intended for use in the

following Electromagnetic

Environment(s):

E1 (residential), E2 (commercial and

light industrial), E3 (urban outdoors)

and E4 (controlled EMC environment,

ex. TV studio).

Table of Contents

Overview ........................................................................... 4

Using the CD-ROM Manual ........................................... 5

Location and Functions of Parts .................................... 7

Mounting on Video Camera ............................................ 9

Mounting the BKP-L551 Battery Adapter .................... 11

Notes on Use .................................................................. 13

Specifications ................................................................ 14

Overview

The CA-D50 is a camera adaptor for mounting on a DXC-D35/

D35WS series digital video camera. The CA-D50 allows a

CCU-D50/D50P/M5A/M5AP Camera Control Unit to be

connected to the camera.

This unit has the following features.

Note

When a DXC-D35/D35P/D35WS/D35WSP camera with a

serial number indicated in the following table is connected to a

CCU-D50/D50P through this unit, the ROM of the camera

must be replaced.

For more information about checking the version and

exchanging ROMs, contact your Sony dealer or a Sony service

representative.

Digital and analog transmission functions

Connecting a CCU-D50/D50P enables, in addition to analog

transmission, digital transmission of video signals, which

enhances picture quality by preventing signal degradation.

(Audio signal transmission is not digital.)

SDI output connector

This unit is equipped with an SDI output connector for output

of digital video signals.

Battery power

The optional BKP-L551 Battery Adapter and battery adaptor

mounting bracket allow a battery to be mounted on this unit.

Camera Serial number

DXC-D35 10001 to 11325, 18001 to 18581, 100001 to 100356,

110001 to 110030

DXC-D35P 40001 to 42755, 48001 to 49261, 400001 to 402001,

410001 to 410033

DXC-D35WS 10001 to 10750, 18001 to 18336, 100001 to 100394

DXC-D35WSP 40001 to 40420, 48001 to 48366, 400001 to 400030

Using the CD-ROM Manual

The supplied CD-ROM includes operation manuals for the CA-

D50 series of camera adaptor (English, Japanese, French,

German, Italian and Spanish versions).

CD-ROM System Requirements

The following are required to access the supplied CD-ROM

disc.

•Computer: PC with MMX Pentium 166 MHz or faster CPU,

or Macintosh computer with PowerPC CPU.

- Installed memory: 32 MB or more

- CD-ROM drive: ×8 or faster

•Monitor: Monitor supporting resolution of 800 ×600 or

higher

When these requirements are not met, access to the CD-ROM

disc may be slow, or not possible at all.

Preparations

The following software must be installed on your computer in

order to use the operation manuals contained in the CD-ROM

disc.

•Microsoft Internet Explorer Version 4.0 or higher, or

Netscape Navigator Version 4.0 or higher

• Adobe Acrobat Reader Version 4.0 or higher

•MMX and Pentium are registered trademarks

of Intel Corporation or its subsidiaries in the

United States and other countries.

•PowerPC is a registered trademark of

International Business Machines Corporation.

•Macintosh is a registered trademark of Apple

Computer, Inc.

•Microsoft is a registered trademark of

Microsoft Corporation in the United States

and/or other countries.

•Netscape Navigator is a registered trademark

of Netscape Communications Corporation in

the U.S. and other countries.

•Adobe and Acrobat are registered trademarks

of Adobe Systems Incorporated in the United

States and/or other countries.

....................................................................................................................................................................

Notes

•If Microsoft Internet Explorer is not installed, it may be

downloaded from the following URL:

http://www.microsoft.com/ie

•If Netscape Navigator is not installed, it may be downloaded

from the following URL:

http://home.netscape.com/

•If Adobe Acrobat Reader is not installed, it may be

downloaded from the following URL:

http://www.adobe.com/products/acrobat/readstep.html

To Read the CD-ROM Manual

To read the operation manual contained in the CD-ROM disc,

do the following.

1Insert the CD-ROM disc in your CD-ROM drive.

A cover page appears automatically in your browser.

If it does not appear automatically in the browser, double

click the index.htm file on the CD-ROM disc.

2Select and click the operation manual that you want to

read.

A PDF file of the operation manual opens.

Note

If you lose the CD-ROM disc or become unable to read its

content, for example because of a hardware failure, contact

your Sony dealer or a Sony service representative.

Overview

Location and Functions of Parts

Front side

Accessory shoe

Shoulder strap fitting

Rear side

1Camera connector

2CALL button

3RET/VTR button

4CCU/VTR/CMA connector

5INTERCOM knob

6EARPHONE jack

7INTERCOM connector

8PROMPT/GENLOCK connector

9DC IN connector

0SDI OUT connector

1Camera connector (PRO 76-pin

DIGITAL)

Connect to the camera’s VTR

connector.

2CALL button

Press to call the operator of a camera

control unit (CCU) or remote control

panel.

When this button is pressed, a red tally

indicator lights on the CCU and

remote control panel.

Note

The CALL button does not function in

a system which combines the CA-D50

with a CCU-M5A/M5AP.

3RET/VTR button

Use this button when a CCU-D50/

D50P/M5A/M5AP or VTR is

connected to the CCU/VTR/CMA

connector.

When a CCU-D50/D50P/M5A/

M5AP is connected: Holding down

this button displays return video

in the viewfinder. When the

button is released, the viewfinder

returns to the video being shot by

the camera.

When a VTR is connected: This

button functions as a VTR

recording start/stop button.

Recording starts when the button

is pressed and stops when it is

pressed again.

4CCU/VTR/CMA connector

(26-pin, male)

Connect a CCU-D50/D50P/M5A/

M5AP, VTR, or CMA-8A/8ACE AC

Adaptor. This connector sends and

receives power and all video, audio,

and control signals between this unit

and the connected device.

5INTERCOM knob

Adjusts the received signal level of

intercom audio.

6EARPHONE jack (mini jack)

Connect earphones. Earphones allow

you to monitor the recording or

playback audio of a VTR connected to

this unit.

7INTERCOM connector (mini

intercom jack)

Connect the DR-100 headset (not

supplied). The DR-100 allows you to

talk with the operators of camera

control units, special effects units,

switchers, and so on.

8PROMPT/GENLOCK connector

(BNC type)

When a CCU is not connected:

Input a reference video signal

(black burst or composite video

signal) for external

synchronization.

When a CCU is connected: This

connector outputs prompter

signals whenever prompter

signals are input to the CCU.

9DC IN connector (XLR 4-pin)

Connect to an external DC power

supply (12 V). Use the CCQX-3 DC

Power Cord (not supplied) to connect

this connector and the CMA-8A/

8ACE AC Adaptor (not supplied).

Power supplied from the DC IN

connector is given priority over power

supplied from the CCU/VTR/CMA

connector.

0SDI OUT connector (BNC type)

Outputs video signals from the camera

as digital video (SDI) signals.

Location and Functions of Parts

Mounting on Video Camera

This unit

Groove

Slot

Projection

(Continued)

This unit is dockable with a DXC-D35/D35WS series digital

video camera.

Before mounting on a DXC-D35/D35WS series camera,

remove the camera’s shoulder pad.

On how to remove the shoulder pad, refer to the procedure of

mounting a VTR described in the operating instructions for the

DXC-D35/D35WS series camera.

Note

Always power the camera off before mounting this unit.

1Fit the projection on the bottom of

this unit into the slot on the

camera.

2Slide the unit along the groove on

the camera, and press firmly until

fixed.

Camera

3Tighten the two screws in the

figure.

4Tighten the two screws on the

bottom side of the camera.

5Attach the shoulder pad.

To remove this unit from the camera

Carry out the mounting procedure in

reverse.

Attachment screws

Mounting on Video Camera

Other manuals for CA-D50

Table of contents

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions