Technical Data Sheet SONOFLOW®IL.52/3 V2.0
Ultrasonic Flow Sensor
1
Revision: 1.3; Date: 2020-05-18
The inline compact sensor SONOFLOW®
IL.52/3 V2.0 serves to detect smallest flow
rates of liquids quickly.
Constructed as a built-in component for
machines and apparatuses, the sensor
could be easily mechanically installed and
electrically integrated into the control system.
Due to the current, frequency and switching
outputs industrial dosing applications can be
supported. The RS485 interface
(SONOTEC®protocol; MODBUS®via
software settings) allows bus operation of up
to 12 sensors in rough industrial
environments.
Specifically designed for the use in areas
with rigorous hygiene requirements, the
sensor is suitable for circulation cleaning
and steam sterilization.
General data
SONOFLOW®IL.52/3 V2.0
Ultrasonic Flow Sensor for Liquids
Order-No. IL.52/3 PEEK / Viton®* 200 08 0001
IL.52/3 PEEK / FFKM 200 08 0044
Dimensions (L x W x H) 148 x 59 x 46 mm
Weight 370 g
Media Water or other acoustically transparent, low-viscosity liquids (for applications with
high-viscosity liquids, e.g. fats / special paints, screening tests must be made)
Upper range value 3 000 ml/min
Accuracy for water
(at 23° C ± 2 K and 1 bar)
0 … 30 ml/min: ± 0.3 ml/min
30 ... 3 000 ml/min: ± 1.0 %
Calibration Factory calibrated for water at 23 °C ±2 K, outlet of the tubes depressurized
(0 bar), other calibration on request
Zero stability 0.375 ml/min
Pressure drop at
nominal flow rate
0.95 bar
* Viton®is a registered trademark of DuPont de Nemours, Inc.
