SonicWALL TZ 150 Wireless User manual

SonicWALL TZ 150

Getting Started Guide

SonicWALL TZ 150 Getting Started Guide Page 1

SonicWALL TZ 150 Security Appliance

Getting Started Guide

The SonicWALL®TZ 150 is a total security platform delivering true

layered security by integrating gateway anti-virus, intrusion

prevention and content filtering capabilities for small networks in an

easy-to-use, low cost platform.

When combined with the SonicWALL Gateway Anti-Virus,

Anti-Spyware and Intrusion Prevention Service subscription, the

SonicWALL TZ 150 delivers real-time network security protection

against viruses, worms, Trojans, spyware programs, peer-to-peer

and instant messaging applications, and other malicious code.

This Getting Started Guide provides instructions for basic installation

and configuration of the SonicWALL TZ 150. After you complete this

guide, up to 10 computers on your Local Area Network (LAN) will

have secure Internet access.

Note: For complete documentation, refer to the SonicOS Standard

Administrator’s Guide on the SonicWALL Resource CD or at:

<http://www.sonicwall.com/us/support.html>.

Before You Begin

Check Package Contents

• One SonicWALL TZ 150 security appliance

• One SonicWALL TZ 150 Getting Started Guide

• One SonicOS Standard Release Notes

• One Ethernet cable

• One 12V, 1.66A power supply

• One SonicWALL Resource CD, which contains product

documentation and software utilities.

Any Items Missing?

If any items are missing from your package, contact:

SonicWALL Support

Web: <http://www.sonicwall.com/us/support.html>

E-mail: [email protected]

Page 2

SonicWALL TZ 150 Configuration Steps

Collect Required Information on page 3

Applying Power to the SonicWALL TZ 150 on page 4

Connecting the SonicWALL TZ 150 on page 4

Accessing the Management Interface on page 6

Using the SonicWALL Setup Wizard on page 8

Registering Your SonicWALL TZ 150 on page 16

Activating SonicWALL Security Services on page 21

Connecting Computers to Your Appliance on page 25

Mounting the SonicWALL TZ 150 on page 28

What You Need to Begin

• A computer to use as a management station for initial configuration

of the SonicWALL TZ 150

• An Internet connection

• A Web browser for accessing the SonicWALL TZ 150’s Web-based

management interface. The Web browser must support Java and

HTTP uploads. Internet Explorer 6.0 or higher, Netscape Navigator

9.0 or higher, or Firefox 2.0 or higher are recommended.

SonicWALL TZ 150 Getting Started Guide Page 3

Collect Required Information

Internet Service Provider (ISP) Information

Collect the following information about your Internet service:

Note: If you are not using one of the network configurations above,

refer to the SonicOS Standard Administrator’s Guide.

Other Information

SonicWALL Management Interface default username and password:

User Name: admin

Password: password

If you connect

via

You

probably

use

Please record

Cable modem,

DSL with a router

DHCP You do not need to provide any Internet

connection information.

Home DSL PPPoE User Name:

Password:

Note: Your ISP may require your user

name in the format: name@ISP.com

T1,

Static broadband,

Cable or DSL

with a static IP

Static IP IP Address:

Subnet Mask:

Default Gateway

(Router Address):

Primary DNS:

S e c o n d a r y D N S ( o p t i o n a l ) :

Dial in to a server PPTP Server Address:

User Name:

Password:

Page 4

Applying Power to the

SonicWALL TZ 150

Plug the power supply into the SonicWALL TZ 150 and into an

appropriate power outlet.

The Power LED on the front panel lights up green when you

plug in the SonicWALL TZ 150. The Test LED lights up and

may blink while the appliance performs a series of diagnostic

tests. When the Test light is no longer lit, the SonicWALL TZ 150

is ready for configuration.

Connecting the SonicWALL TZ 150

Internet

Management

Station

LAN 1

WAN

DSL or Cable

Modem

SonicWALL TZ 150 Getting Started Guide Page 5

Connecting the Ethernet Cables

1. Connect one end of an Ethernet cable to your Internet

connection, such as a DSL modem or cable modem.

This cable may already be connected between your computer

and your modem. If so, disconnect it from your computer, and

leave it connected to the internet.

2. Connect the other end of the cable to the WAN port on the back

of your SonicWALL TZ 150.

The WAN LEDs on the front panel light up indicating an active

connection.

3. Connect one end of an Ethernet cable to the computer you are

using to manage the SonicWALL TZ 150.

4. Connect the other end of the cable to port # 1on the back of your

SonicWALL TZ 150.

The port # 1LEDs on the front panel light up indicating an active

connection.

Page 6

Accessing the Management Interface

To access the Web-based management interface of the

SonicWALL TZ 150:

1. On the computer you have connected to port # 1, Start your Web

browser.

Alert: Turn off pop-up blocking software before accessing the

SonicWALL management interface.

Your Web browser must support Java and HTTP uploads.

Internet Explorer 5.0 or higher or Netscape Navigator 4.7 or

higher are recommended.

2. Enter http://192.168.168.168 in the Location or Address field.

3. The SonicWALL Setup Wizard launches and guides you

through the configuration and setup of your SonicWALL TZ 150.

SonicWALL TZ 150 Getting Started Guide Page 7

If the SonicWALL Setup Wizard Does Not Appear

If you cannot connect to the SonicWALL TZ 150 or the Setup

Wizard does not display, verify the following configurations:

• Did you correctly enter the SonicWALL TZ 150 management

IP address in your Web browser?

• Is your computer running pop-up blocking software?

• Are the Local Area Connection settings on your computer set

to obtain an IP address dynamically (DHCP)? see Step 7,

Connecting Computers to Your Appliance on page 25 for

instructions on changing your Local Area Connection

settings.

• Do you have the Ethernet cable connected to your computer

and to the LAN 1 port on your SonicWALL TZ 150?

• Some browsers may not launch the Setup Wizard

automatically. In this case, log into SonicWALL TZ 150 using

“Admin” as the user name and “password” as the password.

After you log in, click the Wizards button on the

System > Status page. Select Setup to begin configuring

your SonicWALL TZ 150.

Page 8

Using the SonicWALL Setup Wizard

The SonicWALL Setup Wizard provides user-guided instructions for

configuring your SonicWALL TZ 150.

Note: Make sure you have any required ISP information to complete

the configuration before using the Setup Wizard. See the list of

required information in Step 1, Collect Required Information on

page 3.

Tip: If you do not know what type of Internet connection you have,

contact your ISP. In addition, the SonicWALL Setup Wizard will

attempt to detect your connection settings. You will see what is

automatically selected in Step 3, WAN Network Mode

Configuring the SonicWALL TZ 150

Welcome - Click Next to begin.

1. Change Password - Change the administrative password. This

is the password for the admin account.

Note: Keep your new password in a safe place. If you lose your

password, you will have to reset the SonicWALL security

appliance to factory settings and lose your configuration. For

instructions on resetting your SonicWALL security appliance,

refer to the SonicOS Standard Administrator’s Guide.

Click Next.

Old Password Should be populated with the default

password, password.

New Password Enter your new password.

Confirm Re-enter your new password.

SonicWALL TZ 150 Getting Started Guide Page 9

2. Change Time Zone - Change the Time Zone setting to your

local time zone.

Note: It is important that you set the time zone correctly before

you register your SonicWALL TZ 150.

Click Next.

3. WAN Network Mode - The Setup Wizard automatically detects

most networking modes. If it does not detect a networking mode,

you may have a static IP address.

See Procedure 1, Collect Required Information on page 3.

Select the correct type of network connection for your network.

Click on the yellow link for a networking type to see a definition.

Click Next.

Time Zone Select the time zone for your location from

the list.

Automatically

adjust clock for

daylight saving time

Check this setting if you live in an area

that observes Daylight Saving Time.

Static IP Select Static IP if you want to give the

SonicWALL TZ 150 a specific, unchang-

ing IP address.

DHCP Select DHCP if your ISP assigns your

computer a dynamic IP address. DHCP is

commonly used with cable modems.

PPPoE Select PPPoE if your ISP requires a user-

name and password to establish a con-

nection and assign a dynamic address.

PPPoE is commonly used with DSL.

PPTP Select PPTP if you dial into a specific

server and log into a VPN to establish a

connection.

Other manuals for TZ 150 Wireless

Table of contents

Other SonicWALL Firewall manuals

SonicWALL

SonicWALL 1RK53-116 Owner's manual

SonicWALL

SonicWALL NSa 6700 User manual

SonicWALL

SonicWALL TZ 190 User manual

SonicWALL

SonicWALL Internet Security User manual

SonicWALL

SonicWALL PRO 2040 User manual

SonicWALL

SonicWALL SOHO Wireless User manual

SonicWALL

SonicWALL NSA E7500 User manual

SonicWALL

SonicWALL SuperMassive 9800 User manual

SonicWALL

SonicWALL TZ 180 User manual

SonicWALL

SonicWALL SMA 400 Instruction Manual

SonicWALL

SonicWALL TZ 190 User manual

SonicWALL

SonicWALL TZ 100 / 200 User manual

SonicWALL

SonicWALL NSA 2600 Installation and operation manual

SonicWALL

SonicWALL SonicOS Enhanced 2.2 Service manual

SonicWALL

SonicWALL CDP 6.0 Service manual

SonicWALL

SonicWALL Email Security 7.0 8000 User manual

SonicWALL

SonicWALL SSL-IA Installation instructions

SonicWALL

SonicWALL NSa 2700 User manual

SonicWALL

SonicWALL NSA 250M series User manual

SonicWALL

SonicWALL ESA 4300 User manual

SonicWALL

SonicWALL NSA E7500 User manual

SonicWALL

SonicWALL SuperMassive 9800 AC User manual

SonicWALL

SonicWALL TZ 100 Series User manual

SonicWALL

SonicWALL TZ 180 User manual

Popular Firewall manuals by other brands

Cisco

Cisco S190 quick start guide

Fortinet

Fortinet FortiGate Voice Series install guide

ADTRAN

ADTRAN NetVanta 2300 Specifications

SecureLogix

SecureLogix ETM System installation guide

NETGEAR

NETGEAR ProSafe FVX538 Reference manual

Lanner

Lanner FW-8877 user manual

Huawei

Huawei USG6000 Series Upgrade guide

H3C

H3C SecPath F5000-AI-15 installation guide

Nexcom

Nexcom DNA 1150 user manual

Fortinet

Fortinet FortiGate-60 series install guide

Cisco

Cisco 3110 Hardware installation guide

Draytek

Draytek Vigor2860 Series user guide

Lanner electronics

Lanner electronics FW-7650 Series user manual

Swisscom

Swisscom Internet Backup manual

DPtech

DPtech FW1000 SERIES Maintenance manual

FEITIAN

FEITIAN MultiPass FIDO product manual

EBLOCKER

EBLOCKER PRO user manual

GTA

GTA GB-200 Product guide