SoFlow SoBike User manual
20220106 Page 1 of 7
SoBike
Instruction: Front Light Assembly
Table of Contents
1 Take out battery and remove screws ....................................................................................... 1
2 Remove lock ............................................................................................................................. 2
3 Pull out the controller by pulling the cables lightly .................................................................. 2
4 Connect light wire .................................................................................................................... 3
4.1 Make light wire through the whole. ................................................................................ 3
4.2 Connect light wire to controller. ...................................................................................... 4
5 Detailed light installation ......................................................................................................... 6
6 How to turn on the light ........................................................................................................... 7
1 Take out the battery and remove the screws
20220106 Page 2 of 7
2 Remove the lock
The lock will drop out after the screws are removed.
3 Pull out the controller by pulling the cables slightly
20220106 Page 3 of 7
4 Connect the light wire
4.1 Pull the light wire through the whole.
20220106 Page 4 of 7
The light wire can be either connected to the connector 1 or to the connector 2.
4.2 Connect the light wire to the controller.
Marking of the positive and negative of light wire.
Noted:
The positive wire must be connected to the positive pole.
The negative wire must be connected to the negative pole
20220106 Page 5 of 7
Connection of the positive wire to the plug
20220106 Page 6 of 7
5 Detailed light installation
20220106 Page 7 of 7
6 How to turn on the light
Long press UP button for 2 seconds, light will turn on.
Table of contents
