snug SnugStat User manual
SnugStat Duo
2 Channel Wi-Fi Thermostat
Instruction Manual
32
WELCOME
The Snugstat Duo 2 Channel
Wi-Fi Thermostat makes smart,
high performance heating,
easier than ever.
This guide tells you everything
you need to know.
4 5
CONTENTS
Pairing with SnugStat App 10
LCD Display 17
Operation of Main Display Icons 19
Schedule 20
Programming Timer Mode Schedule 22
Copy To 23
Hold Mode 24
Boost Mode 25
Holiday Mode 26
Humidity Sensor 27
Away 27
Feature Settings Explained 28
Operation of Feature Settings 33
Language & Time Zone Selection 34
Clock Setting 35
Backlight Setting 35
Standby Screen 36
Screen Lock 37
Temperature Format 37
Temperature Limit 38
Away 38
Defrost 39
Sensor Selection 40
Floor Temperature Limit 40
Humidity Sensor Calibration 41
Open Window Function 41
Optimum Start 42
Daylight Saving Time 42
System Information 43
Reset to Factory Settings 44
Installation 44
Wiring Diagrams 48
Recalibration 53
INTRODUCTION
76
98
INTRODUCTION
What is a Programmable Thermostat?
A programmable room thermostat is a device that combines the functions
of both a room thermostat and timed heating controller into a single unit.
The programmable thermostat is used to switch the heating system in
It’s important to note that adjusting a room thermostat to a higher setting
will not make the room heat up more quickly. How quickly the room heats up
depends on the design of the heating system and heat-loss of the building.
18°C, and then adjust the temperature gradually up or down by one degree
each day until you are comfortable with the temperature. The higher a
temperature setting required will result in more energy and fuel cost.
temperature, so they must not be placed in a cupboard or covered by
curtains or blocked by furniture. Radiant heat created by the sun, shining
directly onto the thermostat through a window and heat from nearby
correct temperature in the room.
Our SnugStat Duo model allows for the use of one thermostat when the
both a 13A and 5A relay, allowing for this multifunctional control of more
power consuming items.
1110
02
03 A countdown will then begin.
04 On your thermostat, press the icon.
05
a few moments to pair.
On your app, select ‘Heating Thermostat’, then ‘Add Device Location’.
07 Then select a pre-written room name or create your own.
08
seconds before connection is fully established.
09 The app will display ‘Is Connected to the Wi-Fi’ and the thermostat will
read ‘App Matching Successful’.
GETTING STARTED
Pairing the SnugStat Thermostat with the
SnugStat App
Download the free SnugStat App from the Apple Store or the Google Play
Store by searching SnugStat.
01 Open the SnugStat App and register your account.
02 Login to your account.
03 Press the Icon.
04 Select your preferred pairing mode from the list below:
01
Device Location’.
1312
Scan QR Code
01 On the SnugStat app, select ‘Scan QR Code’ and then ‘Add
Device Location’.
02 Allow the SnugStat app camera access.
03 On the thermostat, press the icon.
04 Go to Page 5 and select ‘System Information’.
05 Align the QR code on the thermostat screen inside the square on
Select ‘Heating Thermostat’, then ‘Add Device Location’.
07 Then select a pre-written room name or create your own.
08
seconds before connection is fully established.
09 The app will display ‘Is Connected to the Wi-Fi’ and the thermostat will
read ‘App Matching Successful’.
Manual Entry
01
you to enter your thermostats MAC address.
02
03 Go to Page 2 and select ‘Network Setting’.
04 Select your Wi-Fi network and enter your Wi-Fi password, then select
‘Join’.
05 Press and hold your connected Wi-Fi network, this will appear at the
top of the list.
Your MAC address is on this screen, enter the number into the ‘MAC
1514
Note: DO NOT enter the colons – enter as just the numerical
digits with no spaces.
07 Select ‘Add Device Location’.
08 Then select a pre-written room name or create your own.
09
seconds before connection is fully established.
10 The app will display ‘Is Connected to the Wi-Fi’ and thethermostat
will read ‘App Matching Successful’.
16 17
LCD DISPLAY
01 Temperature Hold
02 Adjusting the optional settings.
03 Day indicator and clock.
04 ‘Away’: Means the thermostat is
maintaining a lower temperature
05 Boost Mode- Select to open the
Boost menu
Air humidity.
07 Power ON/OFF.
08 ‘Holiday’: Displayed when
thermostat is in holiday mode.
09 ‘Schedule’: Programming your ON/
OFF heating cycles.
10 Setup button.
11 Adjusting the temperature setting.
12 or turning a page.
13 Target temperature.
14 Actual temperature display.
15 Temperature reading is in C
or F.
means the heating is ON. If there is
17 Timer ON
07 08 09 10 11 12
04
13
14
15
17
05
01 02 03
OPERATION OF MAIN
DISPLAY ICONS
19
Other manuals for SnugStat
2
Table of contents
Other snug Thermostat manuals
Popular Thermostat manuals by other brands
Saswell
Saswell SAS920XWHB-7-S-RF User manual and warranty card
Aircalo
Aircalo TFP1-ET85P2 operating manual
Honeywell
Honeywell CM721 user manual
Carrier
Carrier DEBONAIR 33CS Installation and operating instructions
Lennox
Lennox iHarmony Zone Thermostat Installation and setup guide
Gemtech
Gemtech GT7000 Operation
