SimPal W230 User manual
SimPal-W230
WiFi Temperature Plug
User Manual
Manual version 1.2
SimPal-W230 WiFi Temperature Plug
1
1.1 Package contents..........................................................................................................2
1.2 Sockets instructions.......................................................................................................3
1.3 Light indicator.................................................................................................................4
1.4 Beeper.............................................................................................................................5
2.1 Install APP.......................................................................................................................5
2.2 Set WiFi and register device.........................................................................................6
2.3 Manual add device.........................................................................................................8
2.4 Device list........................................................................................................................8
2.5 Power control..................................................................................................................9
2.6 Temperature settings................................................................................................... 11
2.7 Schedule settings.........................................................................................................12
2.8 Alarm settings...............................................................................................................13
2.9 Reset factory settings..................................................................................................14
1.0 Technical Specification................................................................................................14
SimPal-W230 WiFi Temperature Plug
2
1.1Package contents
SimPal-W230 WiFi Temperature Plug
3
1.2Sockets instructions
SimPal-W230 WiFi Temperature Plug
4
Figure 2: Temperature sensor Instruction
1.3Light indicator
Model
Indicator
Action
Status
SimPal-W230
Power
indicator
Turning off
Socket poweroutput OFF
Constant light
Socket poweroutput ON
Wireless
indicator
Flash slowly
Connecting WiFi or register on server.
Slowly breath
Working in standby mode.
Constant light
in 3 seconds
Rest to factory setting
Flash fast
Process data
SimPal-W230 WiFi Temperature Plug
5
1.4Beeper
One short beep
Press M button on/off
One long beep
Success to register the device on APP.
Success to set-up WiFi.
Two short beep
Request to register the device
Success register on server.
Three short beep
Failed to register on server.
Five short beep
Failed to connect WiFi
2.1 Install APP
Download “W230 WiFi Plug”APP and install on your Android or IOS smart phone. All operation
and settings will be done on APP.
SimPal-W230 WiFi Temperature Plug
6
2.2 Set WiFi and register device
Set WiFi in smart-link mode
Set WiFi account into W230 to make it connecting with
network. Make your smart phone connected with your own
WiFi network, W230 will register same WiFi network which
smart phone already connected.
1. Power on W230 device, it will beep five times and beep
every 5 seconds, means failed to connect WiFi.
2. Open APP, click “+”icon at the right top place, and select
“Set WiFi and register Device”. it will auto display the
WiFi SSID, only need to input password, and click
“CONNECT”, it will auto set the WiFi SSID and password
onto W230 device.
3. After it set success, W230 will long beep, means WiFi
connected success. It will display device Mac, input the
name, and tap “Add”, then it can register device success.
Device will online after 1 minutes.
SimPal-W230 WiFi Temperature Plug
7
Set WiFi inAP mode
If your router work in dual 2.4G & 5G mode, then it needs to
setup W230 WiFi inAP mode. The method as following:
1. Power on W230, after hear 5 beeps means WiFi
disconnect, press W230 M button for one second to
switch socket power status, it will go to AP mode.
2. W230 will beep twice every 5 seconds, means
working in AP mode, it will generate “WiFi_Socket”
WiFi, make mobile phone connect “WiFi_Socket”. (No
need password to connect “WiFi_Socket”, it may need
to set allow send data even this WiFi can not connect
Internet).
3. Open APP, click + to add new device, APP “Set WiFi
on AP mode” option will auto turn on, select your own
WiFi and input password, Tap “Connect”, W230 will
long beep and display device MAC, input device name
to finish register device. (If input wrong WiFi
password, W230 will failed connect WiFi and five
beeps, need to set WiFi again.)
SimPal-W230 WiFi Temperature Plug
8
2.3 Manual add device
1. When device already set WiFi, Click “+”, and select “Add
device”, input the “Device name”and device Mac, click
“Connect”, it will send register request to device. (Mac
number can be read from device label and packing box)
2. Device will beep twice once received register request. Press
W230 device M button for 1 seconds, device will long beep,
it means accept register. APP will show register device.
2.4 Device list
When open APP, it will auto display registered device, and update device status automatically.
The format of device as following:
“Device name”“Status”“Temperature”“Power status”“
SimPal-W230 WiFi Temperature Plug
9
Device name: the name register when add the device. Use to
separate different device.
Status: “online”: means this device connected with server, can
be control via APP. “offline”: means the device disconnect with
server, can not be controlled via APP. Device will auto online
again when it connected WiFi.
Temperature: It will show latest environment temperature of
this device, auto update every 30 seconds.
Power status:
ON: means the power plug output is ON
OFF: means the power plug output is OFF.
2.5 Power control
On Power control page, it can remotely on/off power, delay turn on power, also can pairing remote
controls and wireless sensors.
Table of contents
Other SimPal Accessories manuals
