Sime EDEA Manual

BRAVA DGT HE

25 - 30 - 35

199838

INSTALLATION AND SERVICING INSTRUCTIONS

ENSURE THAT THESE

INSTRUCTIONS ARE LEFT

FOR THE USER AFTER

COMPLETION OF THE

BENCHMARK SECTION

PLEASE READ THE

IMPORTANT NOTICE

WITHIN THIS GUIDE

REGARDING YOUR BOILER

WARRANTY

EN Cod. 6316191 - 08/2013

6331861A - 04/2022 - R3

BRAVA DGT HE

25 - 30 - 35

199838

INSTALLATION AND SERVICING INSTRUCTIONS

ENSURE THAT THESE

INSTRUCTIONS ARE LEFT

FOR THE USER AFTER

COMPLETION OF THE

BENCHMARK SECTION

PLEASE READ THE

IMPORTANT NOTICE

WITHIN THIS GUIDE

REGARDING YOUR BOILER

WARRANTY

Cod. 6316191 - 08/2013

please position here a sticker

from installation pack

BOILER DETAILS

USER, INSTALLATION AND SERVICING INSTRUCTIONS

EDEA

Condensing wall mounted boiler

Cod.

TRANSLATION OF THE ORIGINAL INSTRUCTIONS

To consult the documentation,

visit our website www.sime.it

199839

RANGE RATED CERTIFICATION

The maximum power, in heating mode, of

Edea

boilers can

be adapted, during the installation, to the thermal needs of

the system by modifying the setting of PAR 15 in the

0 .. 100

range.

The setting of PAR 15 = 100 is the factory setting that allows

the boiler to deliver its maximum power in heating mode. It

can be reduced by modifying the setting of PAR 15 as shown

in the table appearing below.

Once the new setting of PAR 15 has been made, the reduced

maximum power value (kW)

for models with power above 35

MUST MANDATORILY be applied beside the boiler’s data

plate. For checks and adjustments after the modiﬁcation,

refer to the new value for the maximum power.

The useful nominal power levels used are those relative to the

operating conditions (80-60°C) (Pn min - Pn max).

Example for

Edea 30

– default heating power range: 2,8 - 24,5 setting of PAR 15 = 100

– “reduced” heating power range: 2,8 - 18,9 setting PAR 15 = 80

DESCRIPTION

Edea

30 40 Setting of PAR 15

Min Max Min Max

A - Factory power range (heating) kW 2,8 24,5 4,2 34,1

100

B - Reduced power ranges for

maximum power reduction

(heating)

kW 2,8 21,2 4,2 30,7

kW 2,8 18,9 4,2 27,3

kW 2,8 16,5 4,2 23,9

kW 2,8 14,2 4,2 20,5

kW 2,8 11,8 4,2 17,0

kW 2,8 9,4 4,2 13,6

Boiler technical data plate

SAFE HANDLING

IMPORTANT NOTICE

For the first year all of our appliances are protected by our manufacturer’s guarantee which covers both parts and

labour.

As you would expect from Sime Ltd, it is our aim to provide our valued customers with the best in after sales and

service.

To take advantage of any extended warranty offered, all you have to do is to adhere to these 3 simple conditions:

The installation must be carried out to Manufacturers/Benchmark Standards by a Gas Safe Registered

Engineer, and recorded in the installation manual.

The appliance must be registered with both Sime Ltd and Gas Safe within 30 days of installation.

The appliance must be serviced every 12 months, within 30 days of the anniversary of the installation date, by either

Sime Ltd or a Gas Safe registered engineer- ensuring that the Benchmark service record in the installation

manual is completed.

Failure to comply with the above will result in only the 12 month warranty being offered.In the absence of any proof

of purchase, the 12 month warranty period will commence from the date of manufacture of the boiler as shown on the

appliance data plate.

This boiler may require 2 or more operatives to move it into its installation site, remove it from its packaging and

during movement into its installation location. Manoeuvring the boiler may include the use of a sack truck and involve

lifting pushing and pulling.

Caution should be exercised during these operations.

Operatives should be knowledgeable in handling techniques when performing these tasks and the following precau-

tions should be considered:

– Grip the boiler at the base

– Be physically capable

– Use personal protective equipment as appropriate e.g. gloves, safety footwear.

During all manoeuvres and handling actions, every attempt should be made to ensure the following unless unavoi-

dable and/or the weight is light.

– Keep back straight

– Avoid twisting at the waist

– Always grip with the palm of the hand

– Keep load as close to the body as possible

– Always use assistance

WARNING

Caution should be exercised when performing any work on this appliance.

Protective gloves and safety glasses are recommended.

– Avoid direct contact with sharp edges.

– Avoid contact with any hot surfaces.

NOTICE

Please be aware that due to the wet testing of the appliance, there may some residual water in the hydraulic circuit.

– Protect any surfaces, carpets or floorings.

– Use a suitable container to catch any water that escape when removing the protective caps from the connections.

All descriptions and illustrations provided in this manual have been carefully prepared but we reserve the right to make

changes

and improvements in our products that may affect the accuracy of the information contained in this manual.

The Benchmark Scheme

Sime Ltd is a licensed member of the Benchmark Scheme which aims to improve the standards of installation and

commissioning of domestic heating and hot water systems in the UK and to encourage regular servicing to optimise

safety, efficiency and performance.

Benchmark is managed and promoted by the Heating and Hotwater Industry Council.

For more information visit www.centralheating.co.uk.

Please ensure that the installer has fully completed the Benchmark Checklist in the use and maintenance section of

the installation instructions supplied with the product and that you have signed it to say that you have received a full

and clear explanation of its operation.

The installer is legally required to complete a commissioning checklist as a means of complyng with the appropriate

Building Regulations (England and Wales).

All installations must be notified to Local Area Building Control either directly or through a Competent Persons

Scheme.

A Building Regulations Compliance Certificate will then be issued to the customer who should, on receipt, write the

Notification Number on the Benchmark Checklist.

This product should be serviced regularly to optimise its safety, efficiency and performance.

The service engineer should complete the relevant Service Record on the Benchmark Checklist after each service.

The Benchmark Checklist may be required in the event of any warranty work and as supporting documentation

relating to home improvements in the optional documents section of the Home Information Pack.

Please refer to commissioning instructions for filling in the checklist at the back of this installation guide.

Note: All Gas Safe registered installers carry a ID Card.

You can check your installer is Gas Safe Registered by calling 0800 408 5577

SIME COMBINATION BOILERS

Installer checklist

Important Information

IT IS A STATUTORY REQUIREMENT THAT ALL GAS APPLIANCES ARE INSTALLED BY COMPETENT PERSONS,

IN ACCORDANCE WITH THE GAS SAFETY (INSTALLATION AND USE) REGULATIONS (CURRENT EDITION). The

manufacturer’s instructions must not be taken as overriding any statutory requirements, and failure to comply

with these regulations may lead to prosecution.

No modifications to the appliance should be made unless they are fully approved by the manufacturer.

GAS LEAKS: DO NOT OPERATE ANY ELECTRICAL SWITCH, OR USE A NAKED FLAME. TURN OFF THE GAS SUPPL

AND VENTILATE THE AREA BY OPENING DOORS AND WINDOWS CONTACT THE GAS EMERGENCY SERVICE

0800111999.

Please remember to carry out the following checks after installation. This will achieve complete customer

satisfaction, and avoid unnecessary service calls. A charge will be made for a service visit where the fault is not

due to a manufacturing defect.

Has a correct by-pass been fitted and adjusted?

Has the system and boiler been flushed?

Is the system and boiler full of water, and the correct pressure showing on the pressure gauge?

Is the Auto Air Vent open?

Has the pump been rotated manually?

Is the gas supply working pressure correct?

Is the boiler wired correctly? (See installation manual).

Has the D.H.W. ﬂow rate been set to the customer requirements?

Has the customer been fully advised on the correct use of the boiler, system and controls?

Has the Benchmark Checklist in the use and maintenance section of this manual, been completed?

––

SAFETY WARNINGS AND REGULATIONS

m

WARNINGS

– After having removed the packaging

make sure that the product supplied is

integral and complete in all its parts.

If this is not the case, please contact

the Dealer who sold the appliance.

– The appliance must be used as intend-

ed by

Sime Ltd

who is not responsible

for any damage caused to persons,

animals or things, improper instal-

lation, adjustment, maintenance and

improper use of the appliance.

– In the event of water leaks, discon-

nect the appliance from the mains

power supply, close the water mains

and promptly inform professionally

qualiﬁed personnel.

– Periodically check that the operating

pressure of the water heating system

when cold is

1-1.2 bar

. If this is not the

case, increase the pressure or contact

professionally qualiﬁed personnel.

– If the appliance is not used for a long

period of time, at least one of the fol-

lowing operations must be carried

out:

set the main system switch to "OFF";

close the gas and water valves for

the water heating system.

– In order to ensure optimal appliance

operations

Sime Ltd

recommends that

maintenance and checks are carried

out

ONCE A YEAR

– If the power cable is damaged, replace

it with a cable ordered as a spare part

with the same characteristics (type

X). Assembly must be by carried out

by a qualiﬁed professional.

m

WARNINGS

–

It is recommended that all operators

read this manual carefully in order to

use the appliance in a safe and ration-

al manner.

–

This manual

is an integral part of the

appliance. It must therefore be kept

for future reference and must always

accompany the appliance in the event

the appliance is transferred or sold to

another Owner or User or is installed

on another system.

–

Installation and maintenance

of this ap-

pliance must be carried out by a qual-

iﬁed company or by a professionally

qualiﬁed technician in accordance

with the instructions contained in the

manual. Once the work is complete,

the company or technician will issue

a declaration of conformity with na-

tional and local technical standards

and legislation in force in the country

where the appliance will be used.

–

Any repairs on the appliance

must be

carried out solely by professional-

ly qualiﬁed personnel, using original

spare parts only. Failure to comply

with these instructions can jeopard-

ise the appliance’s safety and void the

warranty with immediate effect.

–

Fonderie SIME S.p.A.

reserves the right

to make improvements to its prod-

ucts at any time without prior notice,

without compromising their essential

characteristics. The graphic illustra-

tions and/or images in this document

may show optional accessories that

vary according to the country in which

the appliance is used.

RESTRICTIONS

d

IT IS FORBIDDEN

– To allow children under the age of 8 to

use the appliance. The appliance can

be used by children no younger than 8

years old, by people with physical or

cognitive disabilities, and by people

lacking experience or the necessary

knowledge, provided that they are su-

pervised or have been instructed on

how to use the appliance safely and

that they understand the risks asso-

ciated with it.

– To allow children to play with the ap-

pliance.

– To allow unsupervised children to per-

form user maintenance and cleaning.

– To use electrical devices or applianc-

es such as switches, electrical appli-

ances etc if you can smell fuel. If this

should happen:

open the doors and windows to air

the room;

close the gas isolation device;

promptly call for professional assis-

tance.

– To touch the appliance with bare feet

or with any wet part of the body.

– To carry out any technical interven-

tion or cleaning operation before hav-

ing disconnected the appliance from

the mains power by setting the main

switch to "OFF", and closing the gas

supply.

– To modify the safety or adjustment

devices without authorization and in-

structions from the manufacturer.

d

IT IS FORBIDDEN

– To block the condensate drain (if

present).

– To pull, detach or twist the electrical

cables coming out of the appliance

even if the appliance is disconnected

from the mains power supply.

– To expose the appliance to the ele-

ments. It is suitable for operating in a

partially protected area in accordance

with the EN 15502 standard, with a

maximum ambient temperature of 60

°C and minimum - 5 °C. We recom-

mend installing the appliance under

a pitched roof extension, on a bal-

cony or in a protected recess, none-

theless never exposed directly to the

elements (rain, hail, snow). The appli-

ance is equipped with a series of an-

ti-freeze functions.

– To block or reduce the size of the ven-

tilation openings of the room where

the appliance is installed, if present.

– Remove the mains power and gas

supply from the appliance if the ex-

ternal temperature could fall below

ZERO (risk of freezing).

– To leave containers with ﬂammable

substances in the room where the ap-

pliance is installed.

– To dispose of the packaging material

irresponsibly as it could be danger-

ous. Packaging must be disposed of

as speciﬁed by the legislation in force

in the country where the appliance

will be used.

Dear Customer,

Thank you for purchasing a

Sime Ltd

Edea

boiler, a new-gen-

eration modulating condensing device with technical features

and excellent performance, allowing you to satisfy your heat-

ing and instant domestic hot water requirements with the ut-

most safety and limited running costs.

RANGE

MODEL CODE GAS COUNCIL

NUMBER

EDEA 30 8116900 GC No 47-283-91

EDEA 40 8116902 GC No 47-283-92

COMPLIANCE

Our company declares that the

Edea

appliances conform to

the essential requirements of the following directives:

– Gas Appliances EU Regulation 2016/426

– Boiler Efﬁciency Directive 92/42/EEC

– Low Voltage Directive 2014/35/EU

– Electromagnetic Compatibility Directive 2014/30/EU

– Ecodesign Directive 2009/125/EC

– Regulation (EU) No. 811/2013 - 813/2013

– Energy labelling Regulation (EU) No. 2017/1369

Please refer to the technical data plate for the serial number

and year of manufacture.

SYMBOLS

a

WARNING

To indicate actions which, if not carried out correctly,

can result in injury of a general nature or may dam-

age or cause the appliance to malfunction; these

actions therefore require particular caution and ad-

equate preparation.

f

ELECTRICAL HAZARD

To indicate actions which, if not carried out correct-

ly, could lead to injury of an electrical nature; these

actions therefore require particular caution and ad-

equate preparation.

d

IT IS FORBIDDEN

To indicate actions which MUST NOT BE carried out.

m

CAUTION

To indicate particularly important and useful infor-

mation.

MANUAL STRUCTURE

This manual is organized as follows.

USER INSTRUCTIONS

TABLE OF CONTENTS 9

DESCRIPTION OF THE APPLIANCE

TABLE OF CONTENTS 15

INSTALLATION AND SERVICING

INSTRUCTIONS

TABLE OF CONTENTS 25

USER INSTRUCTIONS

TABLE OF CONTENTS

VERY IMPORTANT!

PLEASE MAKE SURE YOUR COMMISSIONING CHECKLIST AND THE SERVICE INTERVAL RECORDS ENCLOSED

ARE FILLED IN CORRECTLY.

ALL GAS SAFE REGISTERED INSTALLERS CARRY A GAS SAFE ID CARD.

BOTH SHOULD BE RECORDED IN YOUR COMMISSIONING CHECKLIST AND A SERVICE INTERVAL RECORDS.

YOU CAN CHECK YOUR INSTALLER IS GAS SAFE REGISTERED

BY CALLING ON 0800 408 5500 OR ALTERNATIVELY WWW.GASSAFEREGISTER.CO.UK

1 OPERATING WITH EDEA 10

1.1 Control panel ..................................10

1.2 Preliminary checks .............................11

1.3 Ignition .......................................11

1.4 Adjusting the heating temperature ................11

1.5 Adjusting the domestic hot water temperature ......11

1.6 Fault / malfunction codes ........................12

1.6.1 Maintenance request .................. 12

2 SHUTDOWN 12

2.1 Temporary shutdown............................12

2.2 Shutting down for long periods ...................13

3 MAINTENANCE 13

3.1 Adjustments...................................13

3.2 External cleaning...............................13

3.2.1 Cleaning the cladding.................. 13

4 DISPOSAL 13

4.1 Disposal of the equipment (European Directive

2012/19/EU) ...................................13

1 OPERATING WITH EDEA

1.1 Control panel

321

Fig. 1

FUNCTIONAL BUTTONS

yIf pressed once or more times for at least 1 second

during normal operation, this button allows the user

to change the appliance’s operating mode in a cyclical

sequence (Stand-by – Summer – Winter). If the appli-

ance is experiencing a resettable fault, it can be used

to unlock it.

<This allows the user to scroll through the parameters

or decrease the values.

>This allows the user to scroll through the parameters

or increase the values.

CProgramming connector cover plug.

KNOBS

tThe heating knob allows the user to set the heating

temperature to between 20 and 80°C during normal

operation.

rThe domestic hot water knob allows the user to set the

domestic hot water temperature to between 10 and

60°C during normal operation.

NOTE:

pressing any button for more than 30 seconds causes a

fault to appear on the display (ALL 42) without preventing the

appliance’s operation. The warning disappears when normal

conditions are restored.

DISPLAY

“SUMMER”

. This symbol appears when the boiler is op-

erating in "Summer" mode or if only the domestic hot

water mode is enabled via the remote control.

“WINTER”

. The symbol is present in the “Winter” oper-

ating mode, or with the remote control if both the do-

mestic hot water and heating modes are enabled. The

ﬂashing land nsymbols signal that the “chimney

sweep” function is active.

“RESET REQUEST”

. The wording indicates that, once the

fault has been repaired, the appliance’s normal opera-

tion can be reset by pressing the ybutton.

“DOMESTIC HOT WATER”

. This symbol is present during

a DHW request or during the "chimney sweep func-

tion" It ﬂashes during the selection of the domestic hot

water set point.

“HEATING”

. This symbol lights up during heating oper-

ation or during the "chimney sweep function It ﬂashes

during the selection of the heating set point.

“BLOCK” DUE TO NO FLAME

“FLAME PRESENCE"

“POWER LEVEL”

. Indicates the power level at which the

appliance is operating.

“PARAMETER"

. This indicates that the user may be in

parameter setting/display, or "info" or "counter", or in

"activated alarms" (history).

“ALARM"

. This indicates that a fault has occurred.

The number speciﬁes the cause which generated the

alarm.

“CHIMNEY SWEEP"

. This indicates that the "chimney

sweep function" has been activated.

“EXTERNAL TEMPERATURE SENSOR”

. Indicates that the

external temperature sensor has been installed and

that the appliance is working at a sliding temperature.

“HEATING SYSTEM PRESSURE"

. Display of heating sys-

tem pressure.

"ECO", ALTERNATIVE ENERGY SOURCES

. Where active, it

indicates that there is a solar system available.

“MAINTENANCE REQUEST”

. If active, it indicates that it is

time to perform maintenance on the appliance.

This manual suits for next models

Table of contents

Other Sime Boiler manuals

Sime

Sime Open.zip 6 25 BF User manual

Sime

Sime ESTELLE HE 3 ErP Manual

Sime

Sime Planet Dewy 60 BFR User manual

Sime

Sime Murelle 25 OF User manual

Sime

Sime GO 18 BF Manual

Sime

Sime SOLIDA 5 PL User manual

Sime

Sime AQUA 25 INOX BF TS User manual

Sime

Sime RX 26 BF User manual

Sime

Sime Format 34i User manual

Sime

Sime murelle HE 35 R User manual

Sime

Sime Mia HE 25 C10 Manual

Sime

Sime ECOMFORT PLUS 25 HE User manual

Sime

Sime MURELLE EQUIPE 70-105 BOX ErP User manual

Sime

Sime GIULIA SYSTEM 25 User manual

Sime

Sime OPEN HYBRID SMART User manual

Sime

Sime METRO User manual

Sime

Sime ALU HE Series Manual

Sime

Sime AQUA HE 25/25 INOX ErP.BE User manual

Sime

Sime Dewy Equipe P100 Box User manual

Sime

Sime Estelle HE B4 INOX ErP Manual

Sime

Sime MURELLE HM ErP Series User manual

Sime

Sime Planet Dewy 60 BFR User manual

Sime

Sime Dewy 30/130 HE FS User guide

Sime

Sime FORMAT DEWY.zip 25 BF User manual

Popular Boiler manuals by other brands

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES operating instructions

Radijator

Radijator BIO max 23.1 instruction manual

Brunner

Brunner BSV 20 Instructions for use

Buderus

Buderus Logamax GB062-24 KDE H V2 Service manual

Potterton

Potterton 50e Installation and Servicing Manual

UTICA BOILERS

UTICA BOILERS TriFire Assembly instructions

Joannes

Joannes LADY Series Installation and maintenance manual

ECR International

ECR International UB90-125 Installation, operation & maintenance manual

Froling

Froling FHG Turbo 3000 operating instructions

Froling

Froling P4 Pellet 8 - 105 installation instructions

U.S. Boiler Company

U.S. Boiler Company K2 operating instructions

Henrad

Henrad C95 FF user guide

NeOvo

NeOvo EcoNox EF 36 user guide

Potterton

Potterton PROMAX SL 12 user guide

Eco Hometec

Eco Hometec EC 25 COMPACT Technical manual

Viessmann

Viessmann VITODENS 200 Operating instructions and user's information manual

Baxi

Baxi Prime 1.24 installation manual

REXNOVA

REXNOVA ISA 20 BITHERMAL Installation, use and maintenance manual