SilverStone SG04-F User manual
SG04-F
1
Installation and system optimization guide:
The following manual and guides were carefully prepared by the SilverStone engineering team to help
you maximize the potential of your SilverStone product. Please keep this manual for future reference
when upgrading or performing maintenance on your system. A copy of this manual can also be
downloaded from our website at:
http://www.silverstonetek.com
Disassemble chart
Connector definition
Front I/O connector guide
Component size limitations
Recommended cooling device setup & selection
Fan & fan filter disassembly guide
Installation guide
Specification P.2
P.3
P.4
P.23
P.24
P.25
P.27
P.29
3
SCW-HDD-6-32
SCREW
SCREW
ADHESIVE FOAM PAD
OPTICAL DRIVE COVER
SCW-PW-M3
SCW-HW-6-32
MOTHERBOARD STANDOFFS
CABLE TIES
ATX 4PIN EXTENSION CABLE
AC’97 CONNECTOR
SECURE 3.5"HARD DRIVE
FOR SECURE FDD
SECURE 3.5"HARD DRIVE
ATTACH ONTO OPTICAL DRIVE
FOR OPTICAL DRIVE COVER
SECURE CD-ROM AND
MOTHERBOARD
SECURE POWER SUPPLY
SECURE MOTHERBOARD
SECURE POWER SUPPLY
FOR MOTHERBOARD
USB 2.0 CONNECTOR
PIN
USB+5V
GND
NC
LP-
LP+
USB+5V
GND
PIN
LP-
LP+
AUD GND
RET-R
RET-L
PIN
NC
MIC
MIC~BIAS
FPOUT~R
FPOUT~L
NC
PIN
PIN
HD CONNECTOR
AUD GND PORT1L
PORT2L
PORT1R
PORT2R
PIN
PRESENCE
SENSE1_RETURN
SENSE_SEND
SENSE2_RETURN
Power supply (Optional)
Reset switch
USB 2.0*2+MIC+Audio
5.25” Drive bay
Optical drive button
Power switch Right side panel
3.5” Hard drive slot*2
3.5” Drive bay
120mm Fan*2
120mm Fan slot*2
Left side panel
4
1
2
Please release the 4 screws on
the left and right panels as shown.
Открутите 4 шурупа на левой и
правой панелях, как показано на
рисунке.
Bitte lösen Sie die 4 Schrauben
am linken und am rechten Seitenteil.
Veuillez dévisser les 4 vis sur les
panneaux droite et gauche du boîtier.
Afloje los 4 tornillos del panel
derecho y izquierdo.
Svitare le 4 viti dei pannelli destro
e sinistro come mostrato
To remove the panels, pull the
panels toward the back firstly
and then pull them outward away
from chassis
Потянув панели назад, выньте их
из корпуса.
Before you begin, please make sure that you
(1) have all components collected
(2) check that all components do not have compatibility problems with each other or with the case
(3) if possible, assemble the components outside the case first to make sure they are working
(4) keep the motherboard manual ready for reference during installation.
䑜≄㡸ٻ㥐ᶤ䚌ὤٻ㠸䚨㉐⏈ٻ㷌㢀㜈ٻ
䑜≄㡸ٻ◫⮨㡸ٻ䛙䚨ٻὨٻ䟸ڇٻ
䀴㢨㏘ٻⵈᾙ㯱㡸ٻ㣠㵜ٻὤ㐐⮨ٻ
╝⏼␘ډٻ
Ἤ⫰㜄㉐㝴ٻᵍ㢨ٻ㞰㯱ٻ㝘⪬㯱㜄ٻ
㢼⏈ٻ㹑ٻڏᵐ㢌ٻ⇌㇠⪰ٻ㥐ᶤ䚌㐡㐐㟈ډٻ
ࣹרἿᾕᾑᾯὣݰἪἼὀẩἫᾕᾑᾯὣ
Ἴ૽ἨύᾧύἿݰѥἼἢἷ
גὛݰἨἪẪ
ۈἿὙἼࣹרᾕᾑᾯἿᾑὼṞಙ
ὣݰἨἪẪ
䂟ܜᇛوᵓᕠ⿏ࢩݡ㞾″ㆅপߎ
䂟ձ೪⼎ϟᎺেوᵓⱘಯ业㶎㍆
䇋ձ⼎ϟᎺেջᵓⱘಯ乫㶎ϱ
䇋ܜᇚջᵓৢ⿏ࡼݡ㞾ᴎㆅপߎ
Um die Seitenteile zu entnehmen,
ziehen Sie diese zur Rückseite und
nehmen Sie diese dann seitlich heraus.
Pour retirer les panneaux latéraux,
tirez les panneaux vers l'arrière
puis tirez vers l'extérieur du boîtier
Para sacar los paneles derecho y
izquierdo, empujelos hacia atrás
y luego hacia afuera.
Per rimuovere i pannelli, tirare prima
verso la parte posteriore e poi verso
la parte esterna del chassis.
lnstallation Guide
5
3
4
Please release the three screws
on the 3.5” device bracket.
Открутите три шурупа на
кронштейне 3,5-дюймового
устройства.
Сдвиньте назад и выньте из
корпуса кронштейн 3,5-дюймового
устройства.
Lösen Sie die drei Schrauben
der 3,5" Laufwerkshalterung.
Veuillez dévisser les 3 vis du
casier 3.5”.
Afloje tres tornillos de la
abrazadera de la disquetera
Svitare le tre viti del supporto
dell’unità da 3.5”.
Remove the 3.5” device bracket by
pulling it to the back then outward
from chassis.
ڎډڐٻ♈ⵈ㢨㏘ٻ⽀⢰䁇㡸ٻ◫⮨㡰⦐ٻ
Ὠٻ䟸ڇٻⵈᾙ㯱㡸ٻٻ
䀴㢨㏘⦐⺴䉤ٻ㥐ᶤ䚌㐡㐐㟈ډٻ
ڎډڐٻ♈ⵈ㢨㏘ٻ⽀⢰䁇㜄ٻ㢼⏈ٻ
ڎᵐ㢌ٻ⇌㇠⪰ٻ㥐ᶤٻ䚌㐡㐐㟈ډٻ
ṝṘṟẾᾋᾔὨώᾚᾭήᾇᾌὣἼ
ẩύᾧύἜݰἨἪẪ
ṝṘṟẾᾋᾔὨώᾚᾭήᾇᾌἿᾑὼṝಙ
ὣݰἨἪẪ
䂟ܜᇛয়㺱㕂ᶊᕠ⿏ࢩݡ㞾″ㆅপߎ
䂟ϟয়㺱㕂ᶊⱘϝ业㶎㍆
䇋ܜᇚয়㺙㕂ᶊৢ⿏ࡼݡ㞾ᴎㆅপߎ
䇋ϟয়㺙㕂ᶊⱘϝ乫㶎ϱ
Ziehen Sie den 3,5" Laufwerkskäfig
zurück und entnehmen Sie ihn
aus dem Gehäuse.
Retirer le casier 3.5” en le tirant
en arrière puis en dehors du boîtier.
Saque la abrazadera de la disquetera
empujandola primero hacia atrás y
luego hacia afuera.
Rimuovere il supporto dell’unità da
3.5” spingendolo verso la parte
posteriore e poi verso quella esterna
del chassis.
lnstallation Guide
6
5
6
Open the left front side panel Откройте левую переднюю панель.
Открутите 2 шурупа на правой
боковой панели.
Öffnen Sie die linke Seite der Front.
Ouvrez le panneau avant gauche
Abra el panel-puerta izquierdo.
Aprire la parte sinistra del pannello
frontale
Please release the 2 screws on the
right side panel
㝘⪬㯱ٻ㇠㢨☐ٻ䑜≄㜄ٻ㢼⏈ٻڍᵐ㢌ٻ
⇌㇠⪰ٻ㥐ᶤٻ䚌㐡㐐㟈ډٻ
㞰㯱ٻ㤸⮨ٻ㇠㢨☐ٻ䑜≄㡸ٻ㜠㐡㐐㟈ډ
רἿᾙᾱᾷᾌᾕᾑᾯἿᾑὼṜಙὣݰἨἪẪ
ࣹἿᾙᾱᾷᾌᾕᾑᾯὣἪ
䂟ϟেوࠡ䴶ᵓⱘܽ业㶎㍆
䂟ᠧ䭟Ꮊوࠡ䴶ᵓ
䇋ϟেջࠡ䴶ᵓⱘϸ乫㶎ϱ
䇋ᠧᓔᎺջࠡ䴶ᵓ
Lösen Sie dann die 2 Schrauben
an der linken Seite der Front.
Veuillez dévisser les 2 vis du
panneau latéral droit
Afloje los 2 tornillos de la parte
derecha del panel ladero.
Svitare le due viti del pannello destro
lnstallation Guide
7
7
8
Open the right front side panel Откройте правую переднюю
панель.
Чтобы снять кронштейн
вентилятора, нажмите на
указанную область.
Klappen Sie die Front nach rechts
auf.
Ouvrez le panneau avant droit
Abra la parte derecha del panel
ladero.
Aprire il pannello frontale destro
To remove the fan bracket,
press the area as shown
䑠⽀⢰䁇㡸ٻ㥐ᶤ䚌ὤ㠸䚨ڇٻἬ⫰㜄ٻ
⇌䇴⇐ٻ㠸㾌⪰ٻ⌸⪨㐡㐐㟈ډٻ
㝘⪬㯱ٻ㤸⮨ٻ㇠㢨䏬ٻ䑜≄㡸ٻ㜠㐡㐐㟈ډٻ
ᾙὥᾷᾚᾭήᾇᾌὣݰἪἼὀẩۈἿϫᑔ
ὣ૽ἨἪẪ
רἿᾙᾱᾷᾌᾕᾑᾯὣἪẪ
䂟ձ೪⼎পϟ乼ᶊ
䂟ᠧ䭟েوࠡ䴶ᵓ
䇋ձ⼎পϟ亢ᶊ
䇋ᠧᓔেջࠡ䴶ᵓ
Drücken Sie die Clips der
Lüfterhalterung um diese zu
entnehmen.
Pour retirer le casier du
ventilateur, appuyez sur la zone
montrée
Para sacar el ventilador, primero
empuje el área que se muestra
Per rimuovere il supporto della
ventola premere i punti indicati
lnstallation Guide
8
9
10
Turn the fan bracket from the right
to remove it
Чтобы снять кронштейн вентилятора,
поверните его с правой стороны.
Открутите шурупы на корзине
для жесткого диска.
Entnehmen Sie die Lüfterhalterung
indem Sie diese von rechts öffnen
und dann herausnehmen.
Tournez le casier du ventilateur vers
la droite pour l'enlever
Gire la abrazadera del ventilador
hacia la derecha para sacarla
Girare il supporto della ventola
dalla parte destra per rimuoverlo
Release the screws on the hard
drive cage
䚌☐ٻ☐⢰㢨⽀ٻ䀴㢨㫴㜄ٻ㢼⏈ٻ
⇌㇠⪰ٻ㥐ᶤٻ䚌㐡㐐㟈ډ
㝘⪬㯱㡰⦐⺴䉤ٻ䑠⽀⢰䁇㡸ٻ─⫤ٻ䟸ڇٻ
㥐ᶤٻ䚌㐡㐐㟈ډٻ
ᾓᾍᾍᾭὨᾚήὼἿᾑὼὣݰἨἪẪ
ᾙὥᾷᾚᾭήᾇᾌὣרѥἜݰἨἪẪ
䂟ϟ⹀ᶊ㶎㍆
ᇛ乼ᶊᕲেᮍপߎ
䇋ϟ⹀Ⲭᶊ㶎ϱ
ᇚ亢ᶊҢেᮍপߎ
Lösen Sie die Schrauben der
Festplattenhalterungen.
Dévissez les vis de la cage à
disques durs
Afloje los tornillos de la caja del disco
duro
Svitare le viti del box dell’hard disk
lnstallation Guide
9
11
12
Swing open the hard drive cage Откройте корзину для жесткого
диска.
Выньте корзину для жесткого диска.
Klappen Sie die Festplattenhalterung
herunter.
Faites osciller la cage à disques
durs pour l'ouvrir
Abre la caja del disco duro
Aprire il box dell’hard disk
Remove the hard drive cage
䚌☐ٻ☐⢰㢨⽀ٻ䀴㢨㫴⪰ٻ㥐ᶤٻ
䚌㐡㐐㟈ډ
䚌☐ٻ☐⢰㢨⽀ٻ䀴㢨㫴⪰ٻ䢈☘㛨ٻ
㜠㐡㐐㟈ډ
ᾓᾍᾍᾭὨᾚήὼὣݰἨἪẪ
ᾓᾍᾍᾭὨᾚήὼὣἪẪ
䂟ᇛ⹀ᶊ㞾″ㆅЁপߎ
䂟䔝䭟⹀ᶊ
䇋ᇚ⹀Ⲭᶊ㞾ᴎㆅЁপߎ
䇋䕀ᓔ⹀Ⲭᶊ
Entnehmen Sie die
Festplattenhalterung.
Démontez la cage à disques durs
Saque la caja del disco duro.
Rimuovere il box dell’hard disk
lnstallation Guide
This manual suits for next models
1
Table of contents
Other SilverStone Enclosure manuals
SilverStone
SilverStone milo series mj03 User manual
SilverStone
SilverStone MS13 User manual
SilverStone
SilverStone FORTRESS FT04 User manual
SilverStone
SilverStone SG04-FH User manual
SilverStone
SilverStone Precision Series User manual
SilverStone
SilverStone DS222 User manual
SilverStone
SilverStone MS09 User manual
SilverStone
SilverStone Kublai KL06 User manual
SilverStone
SilverStone SUGO SG07 Series User manual
SilverStone
SilverStone PS04B User manual
SilverStone
SilverStone MMS01 User manual
SilverStone
SilverStone Lascala LC14 User manual
SilverStone
SilverStone TS231U-C User manual
SilverStone
SilverStone FARA R1 User manual
SilverStone
SilverStone sugo series sg10 User manual
SilverStone
SilverStone Lascala LC11 User manual
SilverStone
SilverStone RAVEN Z User manual
SilverStone
SilverStone SST-SG02-f User manual
SilverStone
SilverStone PI01 User manual
SilverStone
SilverStone GD07 User manual
