Silver Cross Classic User manual

Classic/Elegance

Chassis

IMPORTANT: KEEP THESE INSTRUCTIONS

FOR FUTURE REFERENCE

These instructions are important.

Read these instructions carefully before use

and keep them for future reference. Your

child’s safety may be affected if you do not

follow these instructions.

Your Classic/Elegance Chassis is a high quality

Silver Cross product. It meets current British

and European safety standards and care and

regular light maintenance will ensure

long service.

Although these instructions clearly outline

the correct use of the Classic/Elegance

Chassis they do no not relate to the seat unit.

To operate the seat unit you must refer to the

separate instructions packed with your

chosen seat unit.

If somebody unfamiliar is using your Classic/

Elegance Chassis always ensure that they

read these instructions carefully so that they

understand how the product works best.

The Chassis is designed and tested to

accept the following Silver Cross seat units:

Sleepover, Sleepover Elegance, Freeway,

Ventura Plus Car Seat and the Simplicity Car

Seat.

Contents

First check all your parts have been supplied.

Your Classic/ Elegance Chassis includes:

1.1 Chassis

1.2 Shopping basket

1.3 Wheels x 4

1.1

1.3

1.2

silvercrossbaby.com

Preparation for use

Remove all packaging material from

your Chassis.

2.1a Attach the wheels by ﬁrst removing

any axle packing protection. Present

the wheels to the axle and slide into

position.

IMPORTANT: If you have a Classic

Chassis go to point 2.2. If you have an

Elegance Chassis please read 2.1b

2.1b Please ensure that the rear wheels are

ﬁtted to the rear axles. The rear wheels

have a toothed sprocket that allows the

brake to be applied.

2.2 Release the wheel locking clip by pulling

gently and slide the wheel to the stop

position. Release the clip and check that

the wheel has ﬁrmly attached. Repeat on

all four wheels.

2.1a

2.1b Elegance Chassis only

2.2

REAR WHEELFRONT WHEEL

Preparation for use (continued)

2.3 Open the chassis by sliding the

folding catches towards you.

2.4 Lift the handle and rotate into the

locked position.

2.3

2.4

silvercrossbaby.com

Preparation for use (continued)

2.5 Gently press down on the handle

ensuring both sides click and lock into

place.

2.6 Carefully position the basket within

the chassis frame with the lower end

towards the brake. Push down on each

locking clip to ﬁrmly secure in place.

2.7 Your Chassis is now ready for use.

2.5

2.6

2.7

3.2

3.1 Using the brake

3.1 To engage the brake simply press down

on the brake pedal.

WARNING: Always check your

brake is fully engaged by gently

rocking your chassis.

3.2 To disengage the brake simply press on

the top of the brake pedal or gently ﬂick

the pedal upwards with your foot.

silvercrossbaby.com

Height adjustable handle

4.1 To adjust the handle simply press both

the adjuster buttons and rotate to the

desired height. Release buttons to lock.

4.2 Your handle has various different

positions and should always lock ﬁrmly

into place.

4.1

4.2

clickclick

5.1

5.2

5.3

Folding the chassis

5.1 Slide the folding catches towards you

until the locking catches disengage on

both sides.

Note: The secondary safety

catch will lock at this stage.

5.2 To disengage the secondary safety

lock, slightly press down on the handle

allowing the secondary lock to swing

freely. Lift upwards allowing the handle

to move forward, freely.

5.3 Rotate the handle until it is parallel to

the wheels and press down on both

sides until you hear a click on both sides.

silvercrossbaby.com

Folding the chassis (continued)

5.4 Your chassis has an automatic locking

catch which secures your chassis for easy

transportation and storage.

5.5 For the most compact fold, adjust the

handle and rotate it towards the ﬂoor,

then lock.

5.6 The wheels are removable by lifting the

wheel clip (see point 2.2) towards you

and pulling the wheel away from the

axle.

5.4

5.6

5.5

Attaching the Ventura Plus

Car Seat

6.1 To attach your Ventura Plus car seat to

the Chassis, hold the car seat centrally

over the chassis mounting bars. On the

underneath of the Ventura Plus are four

locking points, lower the car seat onto

the chassis mounting bars so that these

locate and ‘click’. Gently lift the car seat

to ensure it is fully locked on to the

chassis.

6.2 To disengage the Ventura Plus, there is

a release handle on the rear of the car

seat, pull this upwards whilst holding the

car seat by the handle. You can now lift

the Ventura Plus off the chassis.

6.1

6.2

This manual suits for next models

Table of contents

Other Silver Cross Accessories manuals

Silver Cross

Silver Cross Wave tandem seat User manual

Silver Cross

Silver Cross Ride-on Board User manual

Silver Cross

Silver Cross Doll’s Pram User manual

Silver Cross

Silver Cross Musical Mobile User manual

Silver Cross

Silver Cross Dune User manual

Silver Cross

Silver Cross Wayfarer Cup Holder User manual

Silver Cross

Silver Cross Ride-on Board User manual

Silver Cross

Silver Cross INSECT NET User manual

Silver Cross

Silver Cross Surf Folding Basket User manual

Silver Cross

Silver Cross Surf 3 Wheel Adaptor User manual

Silver Cross

Silver Cross Linear Chassis User manual

Silver Cross

Silver Cross Accessory Pack User manual

Silver Cross

Silver Cross Universal Parasol User manual

Silver Cross

Silver Cross FOOTMUFF User manual

Popular Accessories manuals by other brands

Hillco

Hillco 2810 Operator's manual

Siemens

Siemens QSA2700D Basic documentation

Contours

Contours ZY024 manual

Saivod

Saivod VS621 manual

Virtuox

Virtuox VirtuCLEAN 2.0 user manual

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS user manual

Z-Wave

Z-Wave HSD-200Z user manual

turck

turck FMX-IM-2UPLI63FX quick start guide

Decagon Devices

Decagon Devices 10HS manual

UPPAbaby

UPPAbaby Cup Holder user manual

Elko

Elko SmartSensor Leakage Wireless manual

Grizzly

Grizzly H8371 instructions

Panasonic

Panasonic HG-T Series user manual

IFM Electronic

IFM Electronic Efector 250 Series Brief instructions

DigiDesign

DigiDesign 888/24 I/O installation guide

PROZIS

PROZIS QUAY user manual

patagonia

patagonia PSI Vest user manual

SFC Energy

SFC Energy EFOY GO! manual