Sigrand IPhouse-15E/W User manual

SIGRAND IPHOUSE-15 LIGHT CAMERA HOUSING

User's Manual

Revision 1.1b

1. Description

The IPhouse-15 Ligh Camera Housing is in ended for ou door IP camera ins alla ions. The IPhouse-15

provides pro ec ion, ligh ing, and hea ing for he camera. The IPhouse-15 is powered by PoE (Power over

E herne ) and forwards PoE o he camera.

The IPhouse-15 allows usage of cameras wi h wo E herne por s and PoE chain capabili y.

The IPhouse-15 is able o con rol he LED ligh s and he hea er in he au oma ic or manual mode and

allows moni oring in ernal and ex ernal empera ure, as well as remo e power feeding parame ers.

The IPhouse-15 is con rolled by he Command Line In erface (CLI).

The IPhouse-15 can be supplied in several configura ions:

•IPhouse-15E/W – PoE, Whi e LEDs

•IPhouse-15E/IR – PoE, Infrared LEDs

2. Package Contents

Table 1. IPhouse-15 Package Contents

Item uantity Units

IPhouse-15 Assembly 1 pcs

Bracke Assembly 1 pcs

S aple (for modem) 1 pcs

Shor E herne Pa ch Cord 1 pcs

PoE Ex rac ion Adap er 1 pcs

User's Manual 1 pcs

Package 1 pcs

3. Technical Data

Table 2. LED Lighting Characteristics

Parameter Value Units

Number of LEDs 10 pcs

Maximum LEDs power 10 W

Waveleng h (Infrared LEDs) 850 nm

Color Tempera ure (Whi e LEDs) 6000 K

Viewing Angle 45 °

To al Luminous Flux 1570 lm

Table 3. Mechanical Characteristics

Parameter Value Units

Housing Ma erial Aluminium

Dimensions 396 x 137 x 102 mm

Camera Space 258 x 81 x 75 mm

Weigh (wi hou bracke ) 1400 g

Weigh (wi h bracke ) 1800 g

Pro ec ion Ra ing IP66

Table 4. Operating Conditions

Parameter Value Units

Ambien Tempera ure –40 o +40 °C

Rela ive Humidi y (max a 25 °C) 85 %

A mospheric Pressure (min) 60 kPa

Opera ion Mode Non-s op

Table 5. PoE Characteristics (* Recommended)

Parameter Value Units

To al Power Consump ion (max)* 15 W

PoE Class 3

Camera Power Consump ion (max)* 7 W

Camera PoE Class* 2

Table 6. Default Settings

Parameter Value Units

LEDs Power for Ligh ing 50 %

LEDs Power for Hea ing 50 %

LEDs Power for Prehea 100 %

Ligh ON Illuminance Threshold 10 lx

Ligh OFF Illuminance Threshold 50 lx

Hea er ON Tempera ure Threshold 0 °C

Hea er OFF Tempera ure Threshold 10 °C

Camera Prehea Targe Tempera ure 0 °C

4. Installation and Connection

4.1 Camera Ins alla ion

4.1.1 Unlock he fas eners and open he cover of he housing.

4.1.2 Unscrew he emporary screw and remove he bracke assembly.

4.1.3 Unscrew he humbscrews and remove he suppor .

4.1.4 A ach he suppor o he camera by means of he nu and he screw [1].

4.1.5 Inser he camera in o he housing and fix i by he humbscrews.

4.2 Serial Por Connec ion

4.2.1 If he camera has a serial por , connec he housing's console por o he camera's serial por by

he 4-wire fla cable.

4.3 LAN Cable En rance

The housing has wo sealed LAN cable en rance poin s. Depending of he configura ion, one or wo

en rances can be used. Two en rances are used in he PoE chain configura ion, one for LAN IN cable and he

o her for LAN OUT cable.

4.3.1 Unscrew he gland box nu [2] and push ou he seal plug [3].

4.3.2 Pass he cable [6, 1] hrough he nu [2] and hrough he gland box [4] in o he housing.

4.3.3 Pu he seal plug [3] on he cable [1] and inser i in o he gland box [4].

4.3.4 Tigh en up he gland box nu [2].

4.4 Single-por LAN Connec ion

4.4.1 Connec he LAN IN cable o he PoE inpu por of he housing.

4.4.2 Connec he housing's PoE ou pu por o he camera's PoE por by he shor E herne pa ch cord.

4.5 PoE Chain LAN Connec ion

A camera wi h wo E herne por s and PoE chain capabili y should be used o make a PoE chain. The

housing has no PoE chain capabili y i self. In such a case he housing should be powered hrough i s 48V DC

inpu . The 48V DC vol age is derived from he LAN IN cable by means of supplied PoE Ex rac ion Adaper.

No e: Some fea ures are no func ional in he PoE chain configura ion: camera ON/OFF con rol, camera

power consump ion moni oring, and he Prehea fea ure.

4.5.1 Connec he LAN IN cable o one por of he PoE Ex rac ion Adaper.

4.5.2 Connec he o her por of he PoE Ex rac ion Adaper o he PoE IN por of he camera by he shor

E herne pa ch cord.

4.5.3 Connec he 48V OUT cable of he PoE Ex rac ion Adaper o he 48V DC inpu of he housing.

4.5.4 Connec he LAN OUT cable o he POE OUT por of he camera.

4.6 Moun ing

4.6.1 Close he housing and lock he fas eners.

4.6.2 A ach he bracke assembly o he wall of he building.

4.6.3 Unscrew wo screws from he bo om of he housing.

4.6.4 Moun he housing on he bracke and fix i by wo screws.

5. Command Line Interface (CLI)

5.1 Fea ures

The IPhouse-15 Command Line In erface (CLI) allows:

•Con rolling LEDs, fans and camera manually or au oma ically

•Programming power of LEDs for illumina ion and hea ing

•Enabling or disabling hermos a and prehea (warm up) fea ures

•Programming empera ure and illuminance On/Off hresholds

•Moni oring empera ure, illuminance and consumed power

•Accessing by SSH ( hrough camera's serial por ) or by a erminal

5.2 Accessing CLI hrough Camera's Serial Por

5.2.1 If he camera has an RS-232 serial por , i is possible o access he IPhouse-15 CLI remo ely

hrough an SSH connec ion. Connec he camera's serial por o he IPhouse-15 console por (XP7) by he 4-

wire fla cable (supplied).

5.2.2 Se ing up SSH Connec ion o Camera

Connec he IPhouse-15 o a PoE swi ch por . Wai abou 1 minu e ill he camera is s ar ing.

Run he SSH clien program (for example, putty.exe).

En er he camera's IP address and click OK. The elne window will open.

En er he username and he password for he camera. On successful connec ion he camera's command

line shell promp appears:

BusyBox v1.20.0 (2012-05-10 19:32:59 NOVT) built-in sh ll (ash)

Ent r 'h lp' for a list of built-in commands.

sigTIcam /conf/root #

5.2.3 Se ing up Connec ion from Camera o IPhouse-15

Run he microcom erminal emula ion program on he camera as follows:

# microcom -s 9600 /d v/ttyS0

Press En er. The IPhouse-15 will show he command promp : ( he colon sign).

Issue he info command. The IPhouse-15 should answer as follows:

:info

Sigrand IPhous -15 Light Cam ra Housing V.2.0

5.3 Accessing CLI hrough HyperTerminal

5.3.1 A ach BLS-4 connec or of he IPhouse-15 Console Cable (Annex A) o he console por of he

IPhouse15 device (XP7). A ach DB-9F connec or of he Cable o he COM por of your PC.

5.3.2 Se ing up HyperTerminal

Run he HyperTerminal (Programs – Accessories – Communica ions – HyperTerminal).

En er he name of he connec ion, IPhouse15 for example, and click OK.

Choose he COM por from he lis (COM1, COM2, e c) and click OK.

Se up he COM por as follows and click OK:

Connec he IPhouse-15 o a PoE swi ch por . The IPhouse-15 will s ar and he following informa ion will

appear on he erminal:

Sigrand IPhous -15 Light Cam ra Housing V.2.0

R ady!

5.4 How o Use CLI

5.4.1 How o En er Commands

When he IPhouse-15 is ready o execu e a command, i displays he promp : (colon). To issue a

command, ype he command and press he Enter key. Commands in his manual are highligh ed by he bold

fon s yle.

:t mp

+24.5'C

5.4.2 Command Repe i ion

Some commands have he repe i ion fea ure. Af er en ering such a command firs ime, press Enter

again o repea he command. This fea ure is useful for moni oring empera ure and o her gradually changing

parame ers. Pressing Enter periodically allows observing heir behaviour in real ime.

:t mp

+24.5'C

+24.3'C

+24.1'C

To s op he repe i ion, press Space and Enter, or issue he o her command.

The o her way o repea he previous command is o press ↑ (Arrow Up) and Enter.

5.4.3 Command Edi ing

To invoke he command for edi ing, press he ↑ (Arrow Up) key. The only way o edi a command is

dele ing charac ers from he end of he s ring by pressing he ← (Backspace) key and yping new charac ers.

Press Enter o execu e he correc ed command.

No e: There is no command his ory. Only he las command can be edi ed.

5.4.4 Error Messages

If he en ered command is no a valid command, he device answers wi h he Unknown command

message.

:abcd

Unknown command

If he command has argumen s and one of hem is no valid, he Invalid keyword message appears.

:h lp abcd

Invalid k yword

If he command requires a number and he number is ou of range, he Invalid num er message appears.

:l d pow r 200

Invalid numb r

To correc he error, edi he command as described in he Command editing paragraph.

5.5 Commands

5.5.1 Reference Commands – info and help

The info command displays he name of he device and he version of he firmware.

:info

Sigrand IPhous -15 Light Cam ra Housing V.2.0

The help command displays he lis of available commands.

:h lp

HELP [LED | TH | PH | FAN | CAM] - d tail d h lp

LED - LED s ttings

TH - Th rmostat s ttings

PH - Pr h at s ttings

FAN - Fan s ttings

CAM - Cam ra s ttings

LUX - Actual illuminanc

TEMP - Ext rnal t mp ratur

POWER - Total pow r

DEFAULT - S t factory d faults

REBOOT - R boot th d vic

To ge he de ailed help for a specific command, issue he help command wi h he name of he command

as an argumen . For example, he help led command displays he help ex of he led command.

:h lp l d

LED - LED status

LED [ON|OFF|AUTO] - turn LED On, Off, or Auto mod

LED POWER - LED pow r in %

LED LXON - turn-on illuminanc

LED LXOFF - turn-off illuminanc

LED TMAX - ov rh at t mp.

LED PBO - pow r backoff for ov rh at in %

LED SAVE - sav LED s ttings

5.5.2 LEDs Con rol Command – led

5.5.2.1 LEDs S a e Moni oring

The led command wi hou argumen s displays he LEDs s a e.

:l d

LED: Auto ON Pow r=80% (80%) T mp=+22.1'C

The Auto parame er says ha he LEDs are con rolled au oma ically (see he led auto command). No

displayed o herwise.

The ON parame er says ha he LEDs are curren ly on.

The Power= parame er is he curren se ing of he LEDs power for ligh ing in %. The number in

paren heses is he ac ual power of he LEDs. I may differ from he se ing if he LEDs are curren ly used for

hea ing.

The Temp= parame er is he ou pu of he LEDs empera ure sensor.

5.5.2.2 Con rolling LEDs

The LEDs can be con rolled manually of au oma ically. The commands led on and led off are in ended

for he manual con rol. The led on command urns on he LEDs. The led off command urns hem off.

:l d on

:l d off

No e: hese commands disable he au oma ic mode.

The led auto command enables he au oma ic con rolling he LEDs. In his mode he LEDs are urned on

and off au oma ically in dependence of he ac ual illuminance and empera ure.

:l d auto

The ac ual s a e of he LEDs can be re rieved by he led command.

5.5.2.3 Se ing LEDs Power

The led power N command se s he power of he LEDs for he purpose of ligh ing. The power is se in %

of he maximum power (See Table 1). The valid range is from 1 o 100.

:l d pow r 70

The led power command displays he curren se ing of he ligh ing power.

:l d pow r

70%

5.5.2.4 Se ing Illuminance Thresholds

In he au oma ic mode, he LEDs are urned on when he illuminance falls down o he lower hreshold,

and are urned off when he illuminance rises up o he upper hreshold.

The led lxon N command se s he lower illuminance hreshold (in lux).

:l d lxon 10

The led lxoff N command se s he upper illuminance hreshold (in lux).

:l d lxoff 50

No e: The upper hreshold should be higher han he lower one. Typically he upper hreshold is several

imes higher. I is required o preven LEDs flashing when he ac ual illuminance is near he hreshold.

The commands led lxon and led lxoff display he curren se ings for he illuminance hresholds.

:l d lxon

10 lx

:l d lxoff

50 lx

For he ac ual illuminance, see he lux command.

5.5.2.5 Se ing Overhea Parame ers

The opera ing life of he LEDs depends of heir empera ure. To preven he overhea of he LEDs, he

empera ure is limi ed o he Tmax value. When he LEDs empera ure reaches Tmax, he power of he LEDs is

au oma ically dropped o he value called power backoff (PBO).

The led tmax N command se s he upper empera ure limi for he LEDs. The N value is he empera ure

in °C.

:l d tmax 70

The led tmax command displays he curren se ing of he empera ure limi .

:l d tmax

+70'C

The led pbo N command se s he power backoff in %.

:l d pbo 50

The led pbo command displays he curren se ing of he power backoff.

:l d pbo

50%

Warning: Changing hese se ing may affec he LEDs' life ime!

5.5.2.6 Saving LEDs Se ings

The led save command wri es he curren LEDs se ings o he EEPROM.

:l d sav

No e: If he se ings are no saved, hey will be los af er power off. Do no forge o save he se ings.

5.5.3 Thermos a Con rol Command – th

The hermos a is he fea ure ha allows o keep he in ernal empera ure wi hin specified limi s by using

he LEDs as a hea er.

5.5.3.1 Thermos a Moni oring

The th command displays he s a e of he hermos a .

:th

Th rmostat: ON Pow r=50% T mp=+19'C H at r: OFF

The firs parame er (ON or OFF) shows whe her he hermos a is enabled or no .

The Power= parame er is he ac ual se ing for he LEDs power used for hea ing.

The Temp= parame er is he in ernal empera ure.

The las parame er displays he s a e of he hea er (ON or OFF). When he hermos a is enabled, he

hea ing is urned on and off au oma ically.

5.5.3.2 Enabling Thermos a

The th on command enables he hermos a , he th off command disables i .

:th on

:th off

5.5.3.3 Se ing Power for Hea ing

The th power N command se s he power of he LEDs for he purpose of hea ing in %.

:th pow r 50

The th power command displays he curren se ing of he hea ing power.

:th pow r

50%

No e: he same LEDs are used for ligh ing and for hea ing, bu he power assigned for hea ing may differ

from he power assigned for ligh ing.

5.5.3.4 Se ing Tempera ure Thresholds

If he hermos a is enabled, he LEDs are urned on when he in ernal empera ure falls down o he

lower hreshold, and are urned off when he in ernal empera ure rises up o he upper hreshold.

The th ton N command se s he lower empera ure hreshold. The N is a signed in eger value in °C.

:th ton 0

The th toff N command se s he upper empera ure hreshold.

:th ton 10

The commands th ton and th toff display he curren se ings for he empera ure hresholds.

:th ton

+0'C

:th toff

+10'C

5.5.3.5 Saving Thermos a Se ings

The th save command saves he curren hermos a se ings o he EEPROM.

:th sav

5.5.4 Prehea Con rol Command – ph

The prehea is he fea ure ha allows o delay he camera s ar up un il he in ernal empera ure reaches

he specified hreshold. I allows he camera o avoid opera ing a he empera ure which is ou of he camera's

ra ings.

No e: Prehea is no func ional in he PoE chain configura ion and should no be enabled.

5.5.4.1 Prehea Moni oring

The ph command displays he s a e of he prehea .

:ph

Pr h at: ON Pow r=100% T mp=+18'C H at r: OFF

The firs parame er (ON or OFF) shows whe her he prehea fea ure is enabled or no .

The Power= parame er is he ac ual se ing for he LEDs power used during he prehea .

The Temp= parame er is he in ernal empera ure.

The las parame er displays he s a e of he hea er (ON or OFF).

5.5.4.2 Enabling Prehea Fea ure

The ph on command enables he prehea fea ure, he ph off command disables i .

:ph on

:ph off

5.5.4.3 Se ing Power for Prehea

The ph power N command se s he power of he LEDs for he prehea in %.

:ph pow r 100

The ph power command displays he curren se ing of he prehea power.

:ph pow r

100%

No e: The prehea power can be se higher because he camera is off and does no consume power.

5.5.4.4 Se ing Targe Tempera ure

If he prehea is enabled, a he power up he camera is off and he Hea er is on. When he in ernal

empera ure reaches he arge value, he hea er is urned off and he camera is urned on.

This manual suits for next models

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions