⚫Have one 2GSa/s ADC. When all channels are enabled, each channel has a maximum
sample rate of 1GSa/s. When a single channel per ADC is active, it has sample rate of
2GSa/s
⚫The newest generation of SPO technology
⚫Waveform capture rate up to 110,000wfm/s (normal mode), and 400,000wfm/s
(sequence mode)
⚫Supports 256-level intensity grading and color display modes
⚫Record length up to 28Mpts
⚫Digital trigger system
⚫Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time out (Dropout),
Pattern
⚫Serial bus triggering and decoding (Standard), supports protocols IIC, SPI, UART,
RS232,CAN,LIN
⚫Video trigger, supports HDTV
⚫Low noise floor with voltage scales from 500μV/div to 10V/div
⚫10 types of one-button shortcuts, supports Auto Setup, Default, Cursors, Measure, Roll,
History, Display/Persist, Clear Sweep, Zoom and Print
⚫Segmented acquisition (Sequence) mode, divides the maximum record length into
multiple segments(up to 80,000), according to trigger conditions set by the user, with a
very small dead time segment to capture the qualifying event.
⚫History waveform record (History) function(maximum recorded waveform length is
80,000 frames)
⚫Automatic measurement function for 38 parameters as well as Measurement Statistics,
Zoom, Gating, Math, History and Reference functions
⚫1Mpts FFT
⚫Math and measurement functions use all sampled data points (up to 28Mpts)
⚫Math functions (FFT, addition, subtraction, multiplication, division, integration,
differential, square root)
⚫Preset key can be customized for user settings or factory “defaults”
⚫Security Erase mode
⚫High Speed hardware based Pass/ Fail function
⚫16 Digital channels (MSO) (Option)
⚫Bode plot
⚫Search and navigate
⚫USB AWG module (Option)
⚫USB WIFI adapter(Option)
⚫Web Browser based control
⚫Large 7 inch TFT-LCD display with 800 * 480 resolution
⚫Multiple interface types: USB Host, USB Device (USB-TMC), LAN Pass / Fail, Trigger
Out
⚫Supports SCPI remote control commands
⚫Supports Multi-language display and embedded online help
