SIGLENT SDL1000X User manual

User Manual

SDL1000X Programmable DC

Electronic Load

UM0801X-C01A

2019 SIGLENT TECHNOLOGIES CO., LTD

SIGLENT

SDL1000X User Manual II

Trademark Information

SIGLENT is registered trademark of SIGLENT TECHNOLOGIES CO., LTD.

Statement

●SIGLENT products are protected by patent laws in and outside of the P.R.

China.

●SIGLENT reserves the right to change the specifications and price.

●Information in this publication replaces all previous corresponding

published material.

●Contents in this manual are not allowed to be copied, extracted or

translated in any form or by any means without SIGLENT’s permission.

SIGLENT

SDL1000X User Manual III

General Safety Summary

Please review the following safety precautions carefully to avoid personal

injury or damage to this product or any product connected to it. To prevent

potential danger, please use the instrument as specified.

Use the proper power cord

Only use the the power cord designed for use with the instrument and

authorized for use with in the local country of interest.

Power supply

AC Input Voltages: 110 V/220 V ±10%, 50/60Hz.

Use proper fuse

The fuse types: 110 V/220 V: T315 mA/250 V

Make sure to use the correct type of fuse before turning on the instrument.

Do not connect the power cord before replacing the fuse.

Find and fix the root cause of fuse damage before replacing the fuse.

Ground the instrument

The instrument is grounded through the protective terra/Earth conductor of the

power cord. To avoid electric shock, the grounding conductor must be

connected to the earth. Make sure that the instrument is properly grounded

before activating any inputs or outputs.

Observe all terminal ratings

To avoid fire or electric shock, please observe all ratings and symbols on the

instrument. Read this guide carefully to know more details about the ratings

before connection.

Keep proper ventilation

Inadequate ventilation may cause an increase of the internal temperature of

the instrument, which can lead to damage. Please keep proper ventilation and

check the fan and air-vents regularly when using the instrument.

Operating conditions

Location: Indoor, no direct sunlight, minimal interference and pollution

SIGLENT

SDL1000X User Manual IV

Relative humidity: < 80%

Altitude: < 2000 m

Temperature: 0℃to 40℃

Electrostatic Prevention

Operate in an area that minimizes the potential for electrostatic discharge .

Always ground both the internal and external conductors of cables to release

static before connecting.

Do not operate in an explosive atmosphere

To avoid personal injury or damage to instrument, please do not operate in an

explosive atmosphere.

Keep surface of the product clean and dry

Please keep the surface of the product clean and dry.

SIGLENT

SDL1000X User Manual V

Safety Terms and Symbols

Important terms that may appear on the product and in this manual:

DANGER: Indicates direct injury or hazard that may happen.

WARNING: Indicates potential injury or hazard that may happen.

CAUTION: Indicates potential damage to the instrument or other property that

may happen.

Symbols that may appear on the product:

Hazardous Protective Warning Earth Power

Voltage Earth Terminal Ground Switch

SIGLENT

SDL1000X User Manual VI

SDL1000X Brief Introduction

The SDL1000X series Programmable DC Electronic Load has a 3.5 inch

TFT-LCD display ，a user-friendly interface and superb performance

specifications. Two versions are available: The SDL1020X features an input

range of 150 V/30 A with a total power of 200 W. The SDL1030X has an input

range of with a total power of 300 W. All models have measurement

resolutions of 0.1 mV/0.1 mA，Adjustable current rise time of 0.001 A/s ~ 2.5

A/s，and built-in RS232/USB/LAN communication interfaces. The SDL1000X

also has a standard SCPI communication protocol that can be used with a

computer to create fully automatic testing platforms. The SDL is ideally

suited for Power, battery, LED, automotive electronics, and aerospace

applications.

Main features of the SDL1000X

SDL1020X (Single channel)：DC 150 V/30 A，total power up to 200 W

SDL1030X (Single channel)：DC 150 V/30 A，total power up to 300 W

4 static modes / Dynamic mode：CC/CV/CR/CP

CC Dynamic mode：Continuous, pulsed, toggled

CC Dynamic mode: 25 kHz, CP Dynamic mode: 12.5 kHz, CV Dynamic

mode: 0.5 Hz

Adjustable current rising speed: 0.001 A/us ~ 2.5 A/us

SIGLENT

SDL1000X User Manual VII

Min. readback resolution: 0.1 mV, 0.1 mA

Measuring speed of voltage and current: Up to 500 kHz

100 step list function

Over-current protection, over-power protection , battery, short circuit and

CR-LED test functions

4-wire SENSE compensation mode

External voltage and current control function

Voltage and current monitoring via 0-10 V analog output

3.5 inch TFT-LCD display，capable of displaying multiple parameters and

states simultaneously

Built-in RS232/USB/LAN communication interface，USB-GPIB module

(optional)

With memory function in case of power-down

OCP, OVP, OPP, OTP and LRV protections

Wave form graphing

Voltage based rise/fall function

Von and Vlatch function

Smart fan control to minimize noise

Remote control and measurement on PC

SIGLENT

SDL1000X User Manual VIII

Content

General Safety Summary III

Safety Terms and Symbols V

SDL1000X Brief Introduction VI

Chapter 1 Start Guide 1

General Inspection2

The Front Panel 3

The Rear Panel 6

Connect power8

User interface 10

Fuse Replacement13

Chapter 2 Function and Features 14

Local/Remote Operation Mode15

Local Operation Mode 15

Remote Operation Mode 15

Static Operation Mode 16

Constant Current (CC) Mode 16

Constant Voltage (CV) Mode 18

Constant Resistance (CR) Mode 21

Constant Power (CP) Mode 23

Dynamic test function 25

Continuous mode 26

Pulse mode 29

Toggle mode 32

OCPT Test Function 35

OPPT Test Function 39

Battery Test Function 43

List Test Function 47

Auto Test Function 50

LED Test Function 54

Waveform Display Function 57

Restore 59

Function of Terminals on the Rear Panel 63

Sense mode 63

External trigger function 65

Voltage fault function 66

Current and voltage monitor 66

Short-circuit monitor 66

Protection Functions 66

Overvoltage protection (OVP) 66

SIGLENT

SDL1000X User Manual IX

Overcurrent protection (OCP) 67

Overpower protection (OPP) 67

Over-temperature Protection (OTP) 68

Input Reverse Polarity Protection (RPP) 68

Chapter 3 System Utility Function 69

System 69

1.System info 70

2.Interface71

2.Sound 75

3.Language 76

4.Factory Setting 76

5.Upgrade77

6.BoardTest 77

Config 79

Turn ON/OFF the Sense Function 79

Turn ON/OFF SOF Function 79

Break-Over Volatge 79

Turn ON/OFF Von-Latch Function 79

Set Trigger 80

Set Aver 80

Set EXTC(External Interface) 81

SLMT 86

Limit 87

I_Protect 87

P_Protect 88

Troubleshooting 90

Contact SIGLENT 91

Other manuals for SDL1000X

This manual suits for next models

Table of contents

Other SIGLENT Test Equipment manuals

SIGLENT

SIGLENT SDS-2000X-LA User manual

SIGLENT

SIGLENT SDG Series Operating instructions

SIGLENT

SIGLENT SDS1000CFL Series User manual

SIGLENT

SIGLENT SDS1102X User manual

SIGLENT

SIGLENT SDS1000D User manual

SIGLENT

SIGLENT SDS2304X User manual

SIGLENT

SIGLENT SDS1004X-E Series User manual

SIGLENT

SIGLENT SDS2000X Plus Series User manual

SIGLENT

SIGLENT SDS2000X-E Series User manual

SIGLENT

SIGLENT SDS2000X Plus Series User manual

SIGLENT

SIGLENT SDS2000X Series Installation guide

SIGLENT

SIGLENT SDS1000CML+ User manual

SIGLENT

SIGLENT SHS800X Series User manual

SIGLENT

SIGLENT SHS1000 Series User manual

SIGLENT

SIGLENT SDS1000X-E Series User manual

SIGLENT

SIGLENT SDL1000X User manual

SIGLENT

SIGLENT SDS2000X-E Series User manual

SIGLENT

SIGLENT SDS2000X Plus Series User manual

SIGLENT

SIGLENT SDS6000L Series User manual

SIGLENT

SIGLENT SDS6000L Series User manual

SIGLENT

SIGLENT SDS7000A Series User manual

SIGLENT

SIGLENT SDS1022DL User manual

SIGLENT

SIGLENT SDS5052X User manual

SIGLENT

SIGLENT SHS800 series User manual

Popular Test Equipment manuals by other brands

SMART

SMART KANAAD SBT XTREME 3G Series user manual

Agilent Technologies

Agilent Technologies BERT Serial Getting started

Agilent Technologies

Agilent Technologies N3280A user guide

Vernier

Vernier Go Direct Voltage manual

Lifeloc

Lifeloc R.A.D.A.R. quick start guide

Fluke

Fluke T5-600 Service information

Mercury

Mercury TSL01 user manual

MAHA

MAHA MBT Series Original operating instructions

Fuji Electric

Fuji Electric P-61 instruction manual

ETC

ETC SealerAtor user manual

Skyfine

Skyfine ETHYWAY V2 user manual

Appion

Appion G5 Twin Operation manual

PCB Piezotronics

PCB Piezotronics 8159-0112A Installation and operating manual

BW Technologies

BW Technologies MicroDock II user manual

Sun Nuclear

Sun Nuclear 1027 user guide

Biomark

Biomark HPR LITE READER user manual

Hioki

Hioki 3169-20 instruction manual

Ashcroft

Ashcroft ATE-100 operating manual