Siemens Simatic PC Panel PC 870 Technical Document
Preface; Table of Contents
Product Overview 1
Starting Up the Computing Unit 2
Connecting and Operating the
Computing Unit 3
Expanding and Servicing the
Computing Unit 4
Configuring the Computing Unit in
the BIOS Setup 5
Fault Diagnosis 66
Hardware Information 7
Remote mount form factor 8
Appendices A
B
Glossary, Index
Edition 12/01
This manual is part of the documentation
package with the order number:
6AV7691-0AB00-1AB0
Panel PC 870
Computing Unit
Equipment Manual
SIMATIC PC
Index-2 PanelPC 870 Computing Unit Equipment Manual
Edition 12/01
!Danger
indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
!Warning
indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
!Caution
used with the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
Caution
used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may
result in property damage.
Notice
indicates a potential situation which, if not avoided, may result in an undesirable result or state.
Note
is an important piece of information about the product, the handling of the product or the respective part of
the documentation which should be noted in particular.
Qualified Personnel
Equipment may be commissioned and operated only by qualified personnel. Qualified personnel within
the meaning of the safety notices in this manual are persons who are authorized to commission, ground
and identify equipment, systems and circuits in accordance with safety engineering standards.
Correct Usage
Note the following:
!Warning
The equipment may be used only for the applications stipulated in the catalog and in the technical descrip-
tion and only in conjunction with other equipment and components recommended or approved by Sie-
mens.
Startup must not take place until it is established that the machine, which is to accommodate this compo-
nent, is in conformity with the guideline 98/37/EEC.
Faultless and safe operation of the product presupposes proper transportation, proper storage, erection
and installation as well as careful operation and maintenance.
Safety Guidelines
This manual contains notices which you should observe to ensure your own personal safety, as well as to
protect the product and connected equipment. These notices are highlighted in the manual by a warning
triangle and are marked as follows according to the level of danger:
Safety Guidelines
This manual contains notices which you should observe to ensure your own personal safety, as well as to
protect the product and connected equipment. These notices are highlighted in the manual by a warning
triangle and are marked as follows according to the level of danger:
Index-3
Panel PC 870 Computing Unit Equipment Manual
Edition 12/01
Trademarks You will find the registered trademarks of Siemens AG in the preface. Some of the other desig-
nations used in these documents are also registered trademarks; the owner’s rights may be violated if
they are used by third parties for their own purposes.
Impressum Editor: A&D PT1D1
Publisher: A&D SE ES4
We have checked the contents of this manual for agreement with the hard-
ware and software described. Since deviations cannot be precluded entirely,
we cannot guarantee full agreement. However, the data in this manual are
reviewed regularly and any necessary corrections included in subsequent
editions. Suggestions for improvement are welcomed.
Disclaimer of LiabilityCopyright Siemens AG 2001 All rights reserved
The reproduction, transmission or use of this document or its contents is not
permitted without express written authority. Offenders will be liable for
damages. All rights, including rights created by patent grant or registration of
an utility model or design, are reserved.
Siemens AG
Automation & Drives
SIMATIC Human Machine Interface
A&D PT1
Postfach 4848, D-90327 Nürnberg
ESiemensAG 2001
Technical data subject to change.
Siemens Aktiengesellschaft Order No. 6AV7691–0AA00–0AB0
Index-4 PanelPC 870 Computing Unit Equipment Manual
Edition 12/01
For your notes
v
Panel PC 870 Computing Unit Equipment Manual
Edition 12/01
Preface
About this manual
The SIMATIC Panel PC 870 Equipment Manual is part of the SIMATIC HMI
documentation and consists of two parts: operating unit and computing unit. It
provides information for operators, mechanics, planning engineers and
maintenance personnel about the computing unit’s installation, functionality,
operation and technical design.
Where to find what
The Computing Unit equipment manual contains the following chapters:
Chapter Content
1 Overview of the computing unit’s performance features
2 - 3 Starting up, connecting and operating the computing unit
4 - 5 Servicing, expanding and configuring the computing unit in the
BIOS setup
6Fault diagnosis
7Hardware information
8Remote mount form factor
Appendix A
B
STechnical Data
SESD Guidelines
Glossary
Index
Preface
vi PanelPC 870 Computing Unit Equipment Manual
Edition 12/01
Notation
The following conventions are used in this manual:
Motor off Text that is displayed on the operating unit is printed in
Courier type face.
Variable Symbolic names that stand for variable quantities that
appear on the screen are printed in Courier italic type face.
Screens Selectable functions are printed in standard italic type
face.
ESC Names of keys and buttons are shown in a different type
face.
History
Release Comments
07/01 Initial release of the SIMATIC Panel PC 870 –Computing Unit
equipment manual.
12/01 Extension to include ”Remote mount form factor”option of the
SIMATIC Panel PC 870 –Computing Unit equipment manual.
Trademarks
The following designations are registered trademarks of Siemens AG:
SSIMATICR
SSIMATIC HMIR
SHMIR
SProToolR
SProTool/LiteR
SProTool/ProR
SSIMATIC Multi PanelR
SSIMATIC Multifunctional PlatformR
SMP 270R
SProAgentR
Other Sources of Assistance
In the event of technical queries, please contact your Scontact partner at your
relevant agency or branch office.
Preface
vii
PanelPC 870 Computing Unit Equipment Manual
Edition 12/01
Automation and Drives, Service & Support
Der Service & Support von A&D ist weltweit jederzeit erreichbar.
The languages of the SIMATIC Hotlines are generally German and English, in
addition, French, Italian and Spanish are spoken on the authorization hotline.
Johnson City Nürnberg
Singapur
Service & Support
Technical Support Authorization–Hotline
Europe and Africa (Nurernberg)
Mon.–Fri. 7:00 to 17:00 (Local time, GMT +1)
Phone: +49 –(0) 180 –5050 –222
Fax: +49 –(0) 180 –5050 –223
E–Mail: [email protected]
Europe and Africa (Nuremberg)
Mon. –Fri. 7:00 to 17:00 (Local time, GMT +1)
Phone: +49 –(0) 911 –895 –7200
Fax: +49 –(0) 911 –895 –7201
E–Mail: [email protected]
America (Johnson City)
Mon. –Fri. 8:00 to 19:00 (Local time, GMT –5)
Phone: +1 –(0) 423 –262 –2522
Fax: +1 –(0) 423 –262 –2231
E–Mail: [email protected]
Asia and Australia (Singapur)
Mon. –Fri. 8:30 to 17:30 (Local time, GMT +8)
Phone: +65 –(0) 740 –7000
Fax: +65 –(0) 740 –7001
E–Mail: [email protected]
SIMATIC Premium–Hotline
Worldwide (Nuremberg)
on weekdays
0:00 to 24:00 (Local time, GMT +1)
Phone: +49 –(0) 911 –895 –7777
Fax: +49 –(0) 911 –895 –7001
E–Mail: [email protected]
quick call–back
guaranteed within max. 2 hours
(fee based, only with SIMATIC Card)
Preface
viii Panel PC 870 Computing Unit Equipment Manual
Edition 12/01
Training Center
To help you become familiar with SIMATIC S7 programmable controllers, we offer
training courses. Please contact your regional training center or the central training
center in D 90327 Nuremberg.
Phone: +49 (0) 911–895–3154
Infoline: Tel. +49 (0) 1805 23 56 11
Fax. +49 (0) 1805 23 56 12
Internet: http://www.sitrain.com
E–Mail: AD–T[email protected]
For information on high–availability SIMATIC S7 automation systems, the H/F
Competence Center in Nuremberg offers a special workshop. The H/F
Competence Center will also support you during configuring, start–up and in case
of any problems occurring at site.
Phone: +49 – (0) 911 – 895 – 4759
Fax: +49 – (0) 911 – 895 – 5193
E–Mail: hf–[email protected]
Technical Support Online Services
SIMATIC Customer Support provides you with a wide range of additional
information on SIMATIC products in the online services:
SYou can obtain general up–to–date information as follows:
–on the Internet: address http://www.siemens.de/simatic–net
–at fax polling no. +49 (0) 8765-93 02 77 95 00
SFor current product information, FAQs, tips and hints and downloads which may
be helpful for your application, see:
–On the Internet: address
http://www.siemens.de/automation/service&support
–From the bulletin board system (BBS) in Nuremberg (SIMATIC Customer
Support Mailbox) at the number +49 (0) 911 895-7100.
To dial the mailbox, use a modem with up to V.34 (28.8 Kbaud), with the
following parameters: 8, N, 1, ANSI, or dial on ISDN (x.75, 64 Kbits).
Preface
ix
PanelPC 870 Computing Unit Equipment Manual
Edition 12/01
Further Support
If you have further questions about SIMATIC NET products, contact your local
Siemens representative.
You will find the addresses:
Sin our catalog IK PI
Son the Internet http://www.siemens.de/automation/partner
Sin our interactive catalog CA01
http://www.siemens.de/automation/ca01
Son our quick–start CD
Preface
xPanelPC 870 Computing Unit Equipment Manual
Edition 12/01
Other manuals for Simatic PC Panel PC 870
3
Table of contents
Other Siemens Touch Panel manuals
Siemens
Siemens UP 588/12 User manual
Siemens
Siemens PC 677B User manual
Siemens
Siemens SIMATIC 677 User manual
Siemens
Siemens POL8T5.70/STD Operator's manual
Siemens
Siemens Desigo Touch Series Installation and operation manual
Siemens
Siemens ZIC-8B User manual
Siemens
Siemens SIMATIC OP 77B User manual
Siemens
Siemens SIMATIC Panel PC IL 77 User manual
Siemens
Siemens SIMATIC 677 User manual
Siemens
Siemens 5WG1205-2AB21 User manual
Siemens
Siemens POL8T5.70/STD User guide
Siemens
Siemens SIMATIC PC 670 V2 User manual
Siemens
Siemens Simatic PC Panel PC 870 Technical Document
Siemens
Siemens SIMATIC LS120 User manual
Siemens
Siemens SIMATIC INOX Series Administrator guide
Siemens
Siemens Simatic PC Panel PC 870 Technical Document
Siemens
Siemens POL8T2.40/STD Operator's manual
Siemens
Siemens SIMATIC HMI TP27 Technical Document
Siemens
Siemens SIMATIC TP 270 User manual
Siemens
Siemens Climatix POL8T2.70/STD User guide
Popular Touch Panel manuals by other brands
IBASE Technology
IBASE Technology ASTUT-152-RE1S user manual
YASKAWA
YASKAWA TP 610C manual
B&R
B&R Power Panel C Series user manual
Beijer Electronics
Beijer Electronics X2 control Hardware and installation manual
AXIOMTEK
AXIOMTEK GOT321W-521 user manual
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Operation manual
