Siemens RDS120 User manual

Siemens Switzerland Ltd. declares that the radio equipment type RDS120 is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at www.siemens.com/download?A6V10733818.

Quick guide

Smart Thermostat RDS120 en

Welcome! This Quick guide walks you through:

oSteps to connect the thermostat to the Internet.

oSteps to configure the thermostat to work with your heating or AC (air

conditioning) system.

oSteps to register the thermostat and set it up to work with your mobile

devices.

oBasic operations on the local thermostat and mobile application.

Visit www.siemens.com/smart-thermostat

or more infor

mation about

your thermostat

Before configuration, make sure the thermostat is installed and powered up along with:

A WLAN compatible router Valid email address Smartphone

1. Select a language.

·Tap the language to select.

·Tap to view more languages.

·Tap .

2. Set an administrator password to prevent access to advanced

settings.

We recommend a strong password, particularly if the thermostat is

installed in a public location. If you decide to skip this step, you can

also set the password later under > Advanced settings >

Password.

3. Two ways to set up a network connection:

·Select Network – Follow the on-screen step-by-step instructions

to connect to a WLAN1network.

·Push Button Setup – Connect to a WPS compatible router.

Note:

a. You can skip this step if the network connection fails or you want

to connect to the network another time.

b. The supported WLAN channel range is from 1 to 11. Check your

router settings if your thermostat cannot find the router.

Using the WPS router feature:

a. Press the WPS button on your router when prompted by your

thermostat.

b. Tap Connect on your thermostat to connect to the network.

c. After a connection is established, continue with other settings as

desired.

4. Select the equipment type.

·Select the type of HVAC system corresponding to your

equipment.

·Tap to manually configure the thermostat.

1Your thermostat operates in a frequency band range from 2.4 GHz to 2.4835 GHz, and the maximum radio-frequency

power transmitted in the frequency band is 18 dBm.

5. Continue to set up the heating or AC system details.

·Configure sub-options. Note that the configuration screens may

differ depending on the type of the system.

6. Select the network connection type.

End or home users Institutional users

·Selecting Private WLAN

means that the thermostat

is connected to your own

WLAN network. You need

to choose and manage

your password.

·Selecting Administrated

WLAN means that the

thermostat is connected to the

facility WLAN network. The

password is provided by the

facility managers and under

their control.

7. Configure the time zone.

a. Tap the installed location on the map.

b. Select the time zone (Tap to view

more time zones).

c. Tap and follow the on-screen

instructions to set the year, month and

date.

8. Name the thermostat location.

a. Tap the text box.

b. Select a pre-defined room name from the drop-down list or enter

a room name manually.

c. Tap .

9. Tap Start to restart.

The thermostat restarts immediately. After restart, the home screen

is displayed.

10. Set up the mobile application.

·Using smartphones running iOS 10.0 (or above) or Android 5.0

(or above):

a. Make sure the smartphone is connected to the Internet.

b. Download and install the free mobile application Siemens

Smart Thermostat RDS from App Store® or Google Play™.

c. Follow the mobile application startup steps to register your

account.

Note: If the thermostat is connected to the Internet and

displayed on the home screen, you can download and install the

mobile application as follows:

a. Tap.

b. Scan the QR code displayed as shown on the left using your

smartphone.

c. Open the corresponding website, expand the section on

mobile app, and go to App Store® or Google Play™.

11. Activate your thermostat. This links the thermostat to your

registered account.

·Make sure the thermostat and smartphone are connected to the

Internet.

·Using the application’s built-in QR code scanner, scan the QR

code on the activation code sticker shipped with the thermostat.

You can also enter the code manually.

Note: Only one activation code can be connected to one account.

However, one user account can be associated with a maximum of

12 thermostats. If you want to scan the code directly from the

thermostat, tap on the home screen, then tap to go to the

activation code page.

Congratulations!

You have successfully registered and configured your thermostat

and linked with your registered account. You can now enjoy the

convenience and control of your comfort while saving energy.

Basic operations (see the online user guide for more information)

Local device idle screen 1Relative room humidity

2Room air quality status: good, average, poor.

3Green leaf: Energy-optimized mode.

Red leaf: Tap to restore the energy-optimized mode.

4Room temperature

5Menu: Detailed information and settings.

6Tap to switch to AWAY mode.

Local device home screen

7Tap to switch between AUTO and Manual:

Works according to a schedule or to the current user

setpoint temporarily until the next scheduled switching

point.

Manual mode. Works permanently according to the current

user setpoint.

8Tap or slide to change the room temperature setpoint.

The heating output is energized.

The cooling output is energized.

Neither heating nor cooling output is energized.

9Tap to select a fan mode (AUTO/ON).

App home screen Schedule page

1Options, room name, setpoint and

schedule settings.

2Room humidity, outside air temperature

(if available) and room air quality status.

3Green/red leaf indication

Tap to switch between AUTO and Manual

(see previous page).

5Room temperature

6Decrease setpoint, current setpoint and

increase setpoint.

7Current mode (Comfort,Economyand

Unoccupied). Time for the next mode

8Tap to toggle between At home and

AWAY.

9Copy the current schedule to other days.

NOTE: To go to the schedule

page, tap , and then tap

Thermostat schedule.10 Days of a week

11 Tap and hold, select and move to set a

schedule.

Running hours screen 1Seven-day view by default, showing the heating or cooling

running hours or both of each week day counting down from

the current day.

2Tap to switch to the four-week view.

3Tap to switch to the 12-month view.

4Indication of heating or cooling running hours or both

5The current day/month

6 The current month/year

Note: The Running hours widget displays on the mobile application if the heating or cooling or both has been

enabled. Swipe on the home screen to go to this widget.

Technical specifications and availability subject to change without notice.

After online firmware updates, the text in this document might be different from the one in the updated firmware. See the

latest document at http://siemens.com/bt/download by searching the doc number A6V11228376.

Issued by © Siemens Industry, Inc., 2017

Siemens Industry, Inc. Technical specifications and availability subject to change without notice.

Building Technologies Division

1000 Deerfield Pkwy

Buffalo Grove IL 60089

Tel. +1 847-215-1000

A5W90002096E A6V11228376_en--_a

06-29-2018

Other manuals for RDS120

Table of contents

Other Siemens Thermostat manuals

Siemens

Siemens REV12 User manual

Siemens

Siemens RDS110 User manual

Siemens

Siemens RDF300 Series Operator's manual

Siemens

Siemens Powers TH 192 S User manual

Siemens

Siemens RDF301 User manual

Siemens

Siemens RDG100 Series Operator's manual

Siemens

Siemens RDS110 User manual

Siemens

Siemens RDG110U User manual

Siemens

Siemens RDF340 Series User manual

Siemens

Siemens REV34 User manual

Siemens

Siemens RDJ100 User manual

Siemens

Siemens QAA73.110 Operator's manual

Siemens

Siemens RDG100KN User manual

Siemens

Siemens RAK-TR IP43 User manual

Siemens

Siemens RDE50.1 User manual

Siemens

Siemens REV17 Series User manual

Siemens

Siemens RAA20 User manual

Siemens

Siemens RDH100 User manual

Siemens

Siemens RDH10RF Operating instructions

Siemens

Siemens RDE100 Series User manual

Siemens

Siemens Free Energy Band TH 193 HC User manual

Siemens

Siemens RDG400 User manual

Siemens

Siemens RDG Series User guide

Siemens

Siemens RDB160BN Operator's manual

Popular Thermostat manuals by other brands

EWELLY

EWELLY EW-181 manual

Prolon

Prolon T1100 Hardware guide

Computherm

Computherm Q20 operating instructions

Heatmiser

Heatmiser neoStat user manual

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA user manual

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat user manual

Saswell

Saswell SAS920XWHB-7-S-RF User manual and warranty card

Aircalo

Aircalo TFP1-ET85P2 operating manual

Honeywell

Honeywell CM721 user manual

Carrier

Carrier DEBONAIR 33CS Installation and operating instructions

Lennox

Lennox iHarmony Zone Thermostat Installation and setup guide

Gemtech

Gemtech GT7000 Operation

Rollei

Rollei Smartes 45000 manual

Sinope

Sinope TH1300RF user guide

Honeywell

Honeywell RLV4305 owner's guide

Honeywell

Honeywell Prestige 2.0 THX9421 manual

NuTone

NuTone NTBZ48 Installation & operation guide

Stelpro

Stelpro MAESTRO ASMT402AD user guide