Siemens XDACT-ASSY User manual

A6V10807278_enUS_b Siemens Industry, Inc.

Building Technologies Division

INSTALLATION INSTRUCTIONS

Model XDACT-ASSY

Assembly

INTRODUCTION

The Model XDACT-ASSY is an optional assembly that can be mounted on the inner doors next to a

PMI-2 or a PMI-3, or in the second row of inner doors of CAB2 and CAB3.

Parts Supplied:

1) Dialer bracket, q’ty = 1

2) Locknuts, q’ty = 2

3) Cable harness, q’ty = 1

4) 2-pos connector plug, q’ty = 1

5) Instruction sheet

PMI REAR

COVER

INNER DOOR

2-POS

CONNECTOR

PLUG

CABLE

HARNESS

DIALER

BRACKET

LOCKNUTS

(2) REQ’D

DIALER

MODEL FCA2015-U1

Figure 1 – Mounting the Dialer

A6V10807278_enUS_b

12-22 AWG

BLACK 12-22 AWG

RED

DIALER

FCA2015-U1

2-POS

CONNECTOR

PLUG POWER

PSC-12

TB3

POSITION 2

X102

POSITION 2

Figure 2 – Power Connection to Dialer

INSTALLATION

1. Remove all system power before installation, first battery then AC. To power up, connect the

AC first, then the battery.

2. Mount the dialer bracket in either row 1 or row 2 of the inner door, using the two locknuts

provided.

3. Mount the dialer Model FCA2015-U1, P/N S54400-A63-A1, on the bracket using the four

screws provided with the Dialer.

4. Remove the plastic rear cover of the PMI by removing only the four screws.

5. Connect the cable harness provided to the PMI connector header and to the Dialer.

6. Plug the 2-pos connector provided into the dialer as shown in Figure 2. Use two 12-22 AWG

wires to connect it to the power supply. Connect the black wire from connector TB3 “Position

2” to the connector on the dialer X102 “Position 2”. See Figure 2.

7. Reinstall the PMI rear cover that was removed in Step 4.

8. Refer to the FCA2015-U1 DACT Installation Instructions, Document ID A6V10334254, for more

information, including telephone connection wiring.

9. Apply power to the system.

10.Configure using Zeus programming tool.

NOTE: See the Zeus Quick-Start Manual, P/N 315-033875, for details on programming.

11.Check for proper operation.

A6V10807278_enUS_b

Cyber security disclaimer

Siemens products and solutions provide security functions to ensure the secure operation of building comfort,

fire safety, security management and physical security systems. The security functions on these products and

solutions are important components of a comprehensive security concept.

It is, however, necessary to implement and maintain a comprehensive, state-of-the-art security concept that

is customized to individual security needs. Such a security concept may result in additional site-specific

preventive action to ensure that the building comfort, fire safety, security management or physical security

system for your site are operated in a secure manner. These measures may include, but are not limited to,

separating networks, physically protecting system components, user awareness programs, defense in depth,

etc.

For additional information on building technology security and our offerings, contact your Siemens sales or

project department. We strongly recommend customers to follow our security advisories, which provide

information on the latest security threats, patches and other mitigation measures.

http://www.siemens.com/cert/en/cert-security-advisories.htm

Document ID A6V10807278_enUS_b P/N A5Q00069411

Table of contents

Other Siemens Control Unit manuals

Siemens

Siemens SINUMERIK Series Parts list manual

Siemens

Siemens SITRANS RD500 User manual

Siemens

Siemens SIMOTICS CONNECT 600 User manual

Siemens

Siemens VRD Series Owner's manual

Siemens

Siemens SENTRON 7KM9300-0AM00-0AA0 User manual

Siemens

Siemens VVP47 Series User manual

Siemens

Siemens SINAMICS G130 User manual

Siemens

Siemens Desigo PXC4.E16 User manual

Siemens

Siemens acvatix MVS661 N Series User manual

Siemens

Siemens RAB10 Series User manual

Siemens

Siemens SINUMERIK 840D sl User manual

Siemens

Siemens TX-I/O TXM1.8D Parts list manual

Siemens

Siemens Siprotec DNP3 IP Use and care manual

Siemens

Siemens SIMATIC S7-1200 Parts list manual

Siemens

Siemens SICAM A8000 Series User manual

Siemens

Siemens SIMATIC NET RUGGEDCOM APE1808 Instruction sheet

Siemens

Siemens SIPROTEC User manual

Siemens

Siemens VKF46 Series User manual

Siemens

Siemens Simatic S5 IP 240 User manual

Siemens

Siemens QAW850 User manual

Siemens

Siemens XC1003-A Instruction Manual

Siemens

Siemens SIRIUS 3RW5 series User manual

Siemens

Siemens ASIsafe K45 F User manual

Siemens

Siemens SINUMERIK 840Di sl Parts list manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual