Siemens SIMATIC ET 200SP User manual

Technology module TM PTO 2x24V (6ES7138-6EB00-0BA0)

SIMATIC

ET 200SP

Technology module

PTO 2x24V

(6ES7138‑6EB00‑0BA0)

Equipment Manual

09/2021

A5E50983437

-AA

Preface

Documentation guide

Product overview

Connecting

Configuring/address space

Interrupts/diagnostic

alarms

Technical specifications

Parameter data record

Siemens AG

Digital Industries

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E50983437-AA

Ⓟ

08/2021 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Technology module TM PTO 2x24V (6ES7138‑6EB00‑0BA0)

Equipment Manual, 09/2021, A5E50983437-AA 3

Preface

Purpose of the documentation

This manual includes module-specific information on wiring, diagnostics and the technical

specifications of the technology module.

You can find information that pertains generally to the configuration and commissioning of

the ET 200SP in the ET 200SP system manual.

Conventions

Please observe notes marked as follows:

Note

A note con

tains important information on the product described in the documentation, on

the handling of the product and on the section of the documentation to which particular

attention should be paid.

Siemens Industry Online Support

You can find current information on the following topics quickly and easily here:

•Product support

All the information and extensive know-how on your product, technical specifications,

FAQs, certificates, downloads, and manuals.

•Application examples

Tools and examples to solve your automation tasks – as well as function blocks,

performance information and videos.

•Services

Information about Industry Services, Field Services, Technical Support, spare parts and

training offers.

•Forums

For answers and solutions concerning automation technology.

•mySupport

Your personal working area in Industry Online Support for messages, support queries, and

configurable documents.

This information is provided by the Siemens Industry Online Support in the Internet

(https://support.industry.siemens.com).

Preface

Technology module TM PTO 2x24V (6ES7138‑6EB00‑0BA0)

4Equipment Manual, 09/2021, A5E50983437-AA

Industry Mall

The Industry Mall is the catalog and order system of Siemens AG for automation and drive

solutions on the basis of Totally Integrated Automation (TIA) and Totally Integrated Power

(TIP).

You can find catalogs for all automation and drive products on the Internet

(https://mall.industry.siemens.com) and in the Information and Download Center

(https://www.siemens.com/automation/infocenter).

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Products and solutions from Siemens form one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be connected

to an enterprise network or the internet if and to the extent such a connection is necessary

and only when appropriate security measures (e.g. firewalls and/or network segmentation)

are in place.

You can find additional information on industrial security measures that may be implemented

here (https://www.siemens.com/industrialsecurity).

Siemens’ products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends to apply product updates as soon as available and to

always use the latest product versions. Use of product versions that are no longer supported,

and failure to apply latest updates may increase customer’s exposure to cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed under (https://www.siemens.com/industrialsecurity).

Open Source Software

Open-source software is used in the firmware of the product described. Open Source

Software is provided free of charge. We are liable for the product described, including the

open-source software contained in it, pursuant to the conditions applicable to the product.

Siemens accepts no liability for the use of the open source software over and above the

intended program sequence, or for any faults caused by modifications to the software.

For legal reasons, we are obliged to publish the original text of the license conditions and

(https://support.industry.siemens.com/cs/ww/en/view/109740777).

Technology module TM PTO 2x24V (6ES7138‑6EB00‑0BA0)

Equipment Manual, 09/2021, A5E50983437-AA 5

Table of contents

Preface ................................................................................................................................................... 3

1 Documentation guide............................................................................................................................ 6

1.1 ET 200SP Documentation Guide........................................................................................... 6

2 Product overview................................................................................................................................. 11

2.1 Properties.......................................................................................................................... 11

2.2 Functions .......................................................................................................................... 14

2.2.1 Pulse Train Output (PTO).................................................................................................... 14

3 Connecting .......................................................................................................................................... 17

3.1 Pin assignment .................................................................................................................. 17

4 Configuring/address space .................................................................................................................. 22

4.1 Configuring ....................................................................................................................... 22

4.2 Parameter setting .............................................................................................................. 25

4.3 Address space.................................................................................................................... 29

4.4 Control and feedback interface .......................................................................................... 30

4.4.1 Assignment of the control interface ................................................................................... 30

4.4.2 Assignment of the feedback interface ................................................................................ 34

4.4.3 Enabling the pulse output.................................................................................................. 39

4.4.4 Reaction to CPU STOP ........................................................................................................ 40

4.5 Isochronous mode ............................................................................................................. 41

5 Interrupts/diagnostic alarms ............................................................................................................... 42

5.1 Status and error displays.................................................................................................... 42

5.2 Diagnostic alarms .............................................................................................................. 44

6 Technical specifications....................................................................................................................... 47

A Parameter data record......................................................................................................................... 52

A.1 Parameter assignment and structure of the parameter data record ..................................... 52

A.2 Parameter validation error ................................................................................................. 55

Technology module TM PTO 2x24V (6ES7138‑6EB00‑0BA0)

6Equipment Manual, 09/2021, A5E50983437-AA

Documentation guide

1.1 ET 200SP Documentation Guide

The documentation for the SIMATIC ET 200SP distributed I/O system is arranged into three

areas.

This arrangement enables you to access the specific content you require.

Basic information

The System Manual and Getting Started describe in detail the configuration, installation,

wiring and commissioning of the SIMATIC ET 200SP distributed I/O system. The STEP 7 online

help supports you in the configuration and programming.

Device information

Product manuals contain a compact description of the module-specific information, such as

properties, wiring diagrams, characteristics and technical specifications.

Documentation guide

1.1 ET 200SP Documentation Guide

Technology module TM PTO 2x24V (6ES7138‑6EB00‑0BA0)

Equipment Manual, 09/2021, A5E50983437-AA 7

General information

The function manuals contain detailed descriptions on general topics regarding the SIMATIC

ET 200SP distributed I/O system, e.g. diagnostics, communication, Web server, motion

control and OPC UA.

You can download the documentation free of charge from the Internet

(https://support.industry.siemens.com/cs/ww/en/view/109742709).

Changes and supplements to the manuals are documented in a Product Information.

You can download the product information free of charge from the Internet

(https://support.industry.siemens.com/cs/us/en/view/73021864).

Manual Collection ET 200SP

The Manual Collection contains the complete documentation on the SIMATIC ET 200SP

distributed I/O system gathered together in one file.

You can find the Manual Collection on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/84133942).

"mySupport"

With "mySupport", your personal workspace, you make the best out of your Industry Online

Support.

In "mySupport", you can save filters, favorites and tags, request CAx data and compile your

personal library in the Documentation area. In addition, your data is already filled out in

support requests and you can get an overview of your current requests at any time.

You must register once to use the full functionality of "mySupport".

You can find "mySupport" on the Internet (https://support.industry.siemens.com/My/ww/en).

"mySupport" - Documentation

With "mySupport", your personal workspace, you make the best out of your Industry Online

Support.

In "mySupport", you can save filters, favorites and tags, request CAx data and compile your

personal library in the Documentation area. In addition, your data is already filled out in

support requests and you can get an overview of your current requests at any time.

You must register once to use the full functionality of "mySupport".

You can find "mySupport" on the Internet

(http://support.industry.siemens.com/My/ww/en/documentation).

Documentation guide

1.1 ET 200SP Documentation Guide

Technology module TM PTO 2x24V (6ES7138‑6EB00‑0BA0)

8Equipment Manual, 09/2021, A5E50983437-AA

"mySupport" - CAx data

In the CAx data area of "mySupport", you can access the latest product data for your CAx or

CAe system.

You configure your own download package with a few clicks.

In doing so you can select:

•Product images, 2D dimension drawings, 3D models, internal circuit diagrams, EPLAN

macro files

•Manuals, characteristics, operating manuals, certificates

•Product master data

You can find "mySupport" - CAx data on the Internet

(http://support.industry.siemens.com/my/ww/en/CAxOnline).

Application examples

The application examples support you with various tools and examples for solving your

automation tasks. Solutions are shown in interplay with multiple components in the system -

separated from the focus on individual products.

You will find the application examples on the Internet

(https://support.industry.siemens.com/sc/ww/en/sc/2054).

TIA Selection Tool

With the TIA Selection Tool, you can select, configure and order devices for Totally Integrated

Automation (TIA).

This tool is the successor of the SIMATIC Selection Tool and combines the known

configurators for automation technology into one tool.

With the TIA Selection Tool, you can generate a complete order list from your product

selection or product configuration.

You can find the TIA Selection Tool on the Internet

(http://w3.siemens.com/mcms/topics/en/simatic/tia-selection-tool).

Documentation guide

1.1 ET 200SP Documentation Guide

Technology module TM PTO 2x24V (6ES7138‑6EB00‑0BA0)

Equipment Manual, 09/2021, A5E50983437-AA 9

SIMATIC Automation Tool

You can use the SIMATIC Automation Tool to perform commissioning and maintenance

activities simultaneously on various SIMATIC S7 stations as a bulk operation independent of

TIA Portal.

The SIMATIC Automation Tool provides a multitude of functions:

•Scanning of a PROFINET/Ethernet system network and identification of all connected CPUs

•Address assignment (IP, subnet, gateway) and station name (PROFINET device) to a CPU

•Transfer of the date and the programming device/PC time converted to UTC time to the

module

•Program download to CPU

•RUN/STOP mode switchover

•CPU localization by means of LED flashing

•Reading out of CPU error information

•Reading of the CPU diagnostics buffer

•Reset to factory settings

•Firmware update of the CPU and connected modules

You can find the SIMATIC Automation Tool on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/98161300).

PRONETA

SIEMENS PRONETA (PROFINET network analysis) allows you to analyze the plant network

during commissioning. PRONETA features two core functions:

•The topology overview automatically scans the PROFINET and all connected components.

•The IO check is a fast test of the wiring and the module configuration of a plant.

You can find SIEMENS PRONETA on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/67460624).

Other manuals for SIMATIC ET 200SP

101

This manual suits for next models

Table of contents

Other Siemens Control Unit manuals

Siemens

Siemens S7-1500 PROFIBUS User manual

Siemens

Siemens SIMOTION SCOUT Instruction sheet

Siemens

Siemens SINAMICS V90 User guide

Siemens

Siemens SIMATIC NET User manual

Siemens

Siemens SIMATIC ET 200SP User manual

Siemens

Siemens SIRIUS 3RA2712-.A Series User manual

Siemens

Siemens SINUMERIK 880 SW 6 Technical manual

Siemens

Siemens SPCW110 User manual

Siemens

Siemens SIRIUS User manual

Siemens

Siemens SINAMICS G120D User manual

Siemens

Siemens SIMOTION Technical Document

Siemens

Siemens FCI1802-A2 User manual

Siemens

Siemens SIMATIC TIM 3V-IE DNP3 User guide

Siemens

Siemens SIMATIC IM151-1 STANDARD User manual

Siemens

Siemens LMV36.520A1 Operator's manual

Siemens

Siemens P1 BIM User manual

Siemens

Siemens SCALANCE S623 User manual

Siemens

Siemens Simatic S5 IP 240 Technical Document

Siemens

Siemens LOGO! Series User manual

Siemens

Siemens SIMATIC S7 300 PLC User manual

Siemens

Siemens SIRIUS 3SB3 User manual

Siemens

Siemens NCU 7x0.3 PN Series User manual

Siemens

Siemens QUADLOG Quick guide

Siemens

Siemens SIMOCODE pro User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual