Siemens QNA2 D Series Guide
QNA2..D
Indoor air quality multi-sensor
Mounting
A6V13562246_en--_c Smart Infrastructure
2023-05-16
2 | 16 A6V13562246_en--_c
Table of Contents
1Mounting and installation......................................................................................................................3
1.1 Drywall mounting .....................................................................................................................................6
1.2 Conduit box mounting ..............................................................................................................................9
1.3 Surface mounting...................................................................................................................................12
2Notes ....................................................................................................................................................14
2.1 Safety ....................................................................................................................................................14
2.2 Disposal.................................................................................................................................................14
3Dimensions ..........................................................................................................................................15
Mounting and installation
Drywall mounting
1
A6V13562246_en--_c 3 | 16
1 Mounting and installation
For technical data, see Data sheet.
For configuration, see Commissioning.
Note
Check the package to ensure that it includes all inbox items
Product Package item Name
QNA2700D.BA2
BACnet MSTP
●Sensor module
●Surface mount BACnet MSTP version
●In-wall mount
– Backpack with terminals
– Conduit box cover, mounting plate
– Set of screws and plastic insert
QNA2700D.BA1
BACnet IP
●Sensor module
●Surface mount BACnet IP version
●In-wall mount
– Backpack POE only
– Conduit box cover, mounting plate
– Set of screws and plastic insert
QNA2820D.xx
LoRaWAN
●Sensor module
●Surface mount, antenna
●In-wall mount
– Backpack with terminals (optional)
– Conduit box cover, mounting plate
– Set of screws and plastic insert
Mounting and installation
Drywall mounting
1
4 | 16 A6V13562246_en--_c
NOTICE
●Commission and setup the device prior to mounting.
●To power on the sensor module, connect it to a surface mount powered by
USB type C, PoE, or AC/DC 12...24 V.
Mounting location
●The devices are suitable for drywall mounting, conduit box mounting and surface mounting.
●Recommended height: 1.5 m (4 feet) above the floor. If the recommended height cannot be met, it should
not be lower than 0.9 m (3 feet).
●Do not mount the devices in recesses, shelves, behind curtains or doors, or above or near heat sources.
●Avoid direct solar radiation and drafts.
●Avoid unheated (uncooled) building area such as outside walls.
●Seal the conduit box or the installation tube if any, as air currents can affect sensor readings.
●Adhere to allowed ambient conditions.
●Devices should be mounted at least 5 m (16 feet) away from operable windows, air filters, and fresh air
diffusers.
●In areas where this is impossible, center your device between windows and place your monitor closer to air
return than air diffusers.
Mounting and installation
Drywall mounting
1
A6V13562246_en--_c 5 | 16
Select data mode
●With the inside (concave surface) facing you ensure that the mode selection switch points to 1 (LoRaWAN).
For configuration of BACnet, see Commissioning.
Preparing data connection
Set up your LoRaWAN gateway router prior to installation and on-boarding if LoRaWAN is used
●Unpack the contents of your surface mount kit and In-wall mount kit. If you plan to use LoRaWAN for data
connectivity, locate the LoRa gateway antenna provided in the surface mount kit and screw it onto the top of
the surface mount.
Mounting and installation
Drywall mounting
1
6 | 16 A6V13562246_en--_c
1.1 Drywall mounting
Mounting and installation
Drywall mounting
1
A6V13562246_en--_c 7 | 16
Mounting and installation
Drywall mounting
1
8 | 16 A6V13562246_en--_c
Mounting and installation
Conduit box mounting
1
A6V13562246_en--_c 9 | 16
1.2 Conduit box mounting
Mounting and installation
Conduit box mounting
1
10 | 16 A6V13562246_en--_c
Other manuals for QNA2 D Series
2
This manual suits for next models
3
Table of contents
Other Siemens Accessories manuals
Siemens
Siemens A80850 User manual
Siemens
Siemens RUGGEDCOM WIN7025 User manual
Siemens
Siemens QFM81.21 User manual
Siemens
Siemens 5WG1 201-2DBx3 Series User manual
Siemens
Siemens QPM11 Series User manual
Siemens
Siemens QSA2700D User manual
Siemens
Siemens BS-240 Parts list manual
Siemens
Siemens QMX3.P35H Series User manual
Siemens
Siemens TC12 Guide
Siemens
Siemens QAA2391.EWTC User manual
Siemens
Siemens 3VL9500 - 4PA30 User manual
Siemens
Siemens SITRANS F User manual
Siemens
Siemens SIPART PS2 Administrator guide
Siemens
Siemens SIWAREX WP251 User manual
Siemens
Siemens SITRANS FC430 Quick start guide
Siemens
Siemens SIMATIC VS130 Series User manual
Siemens
Siemens QAA2280.xWNC User manual
Siemens
Siemens WiPS-200 Series User manual
Siemens
Siemens AP 257/42 Service manual
Siemens
Siemens SITRANS WS300 User manual
